auszookers.com • View topic - Which Wire For Tacho?

Board index » Talking About Stuff » Suzuki Talk

Which Wire For Tacho?

Page 1 of 1

[ 13 posts ]

Print view

Previous topic | Next topic

Author

Message

hootied22

Joined: Mon Nov 08, 2010 8:04 am
Posts: 18
Location: Ormeau QLD

Posted: Thu Dec 02, 2010 7:21 am

I'v got a Drover that has a 1600 EFI Vitara eng fitted. The dash in it is the one that dosen't have a factory tacho & mate has given me an after market tacho to mount on top of the dash. The trouble is I don't know wich wire to tap into. There is a plug in the side of the distributor that has 7 wires coming out of it, can anyone tell me wich is the one I need for the tacho?

Cheers.

Last edited by hootied22 on Fri Dec 03, 2010 5:03 am, edited 2 times in total.

FullyZooked

az supporter

Joined: Mon Oct 25, 2010 9:01 am
Posts: 1009
Location: Bendigo

Posted: Thu Dec 02, 2010 7:34 am

Signal wire goes to negative on the coil.

_________________
Built Suzuki's shall reign Victorious.

hootied22

Joined: Mon Nov 08, 2010 8:04 am
Posts: 18
Location: Ormeau QLD

Posted: Thu Dec 02, 2010 7:57 am

Just had a look under the bonet, I can't see anything that looks like a coil. On my last suzi the coil was mounted on the fire wall, but that was a 1300 carby eng this is a 1600 EFI. What should the coil on an EFI look like & where is it on the motor or the body?. Sorry if this question sounds stupid but I have never had a EFI eng before.

steak_knife

az supporter

Joined: Fri May 22, 2009 11:30 pm
Posts: 21335
Location: Smart Ass Island

Posted: Thu Dec 02, 2010 9:40 am

The brown wire coming off the noise filter should be tacho, it is on all the other vit eng's.
The noise filter is a lil black thing in the harness that look's like it does nothing, should be near the dizzy plug..

Should be!!!

_________________
I used to be indecisive,
now I'm not so sure.....

hootied22

Joined: Mon Nov 08, 2010 8:04 am
Posts: 18
Location: Ormeau QLD

Posted: Fri Dec 03, 2010 3:28 am

Thanks Steak_knife,
Is this it? I know it's not black but it's the only thing I could find with brown wires coming out of it.

You do not have the required permissions to view the files attached to this post.

joeblow

Joined: Sat May 10, 2008 11:30 pm
Posts: 3273
Location: melbourne

Posted: Fri Dec 03, 2010 3:55 am

taco is a food...................tacho is the car bit.

_________________
builder of custom road legal zooks......and stuff.

hootied22

Joined: Mon Nov 08, 2010 8:04 am
Posts: 18
Location: Ormeau QLD

Posted: Fri Dec 03, 2010 5:02 am

Yep... Your right I should a stayed at skool longa.....lol
I'll try and fix it up.

laurie

az supporter

Joined: Fri Oct 31, 2008 10:30 pm
Posts: 1540
Location: Blackbutt
Vehicle: LJ80

Posted: Fri Dec 03, 2010 6:07 am

hootied22 wrote:

Yep... Your right I should a stayed at skool longa.....lol
I'll try and fix it up.

and so yoo shood

steak_knife

az supporter

Joined: Fri May 22, 2009 11:30 pm
Posts: 21335
Location: Smart Ass Island

Posted: Fri Dec 03, 2010 6:40 am

joeblow wrote:

taco is a food...................tacho is the car bit.

That is a noise suppressor, but not the one needed, you need the one that's in the eng loom, that one there in in the original loom.

_________________
I used to be indecisive,
now I'm not so sure.....

hootied22

Joined: Mon Nov 08, 2010 8:04 am
Posts: 18
Location: Ormeau QLD

Posted: Fri Dec 03, 2010 7:20 am

Iv'e had a real good look around the loom but stuffed if I can see it. I might just have to run it down to the local auto elec & get them to hook it up, I was hoping to do it my self. You get a certian sadifaction having a go at somthing you dont normaly do.
Thanks for the help Steak_knife.

steak_knife

az supporter

Joined: Fri May 22, 2009 11:30 pm
Posts: 21335
Location: Smart Ass Island

Posted: Fri Dec 03, 2010 7:28 am

89tintop's an auto lecky down Gc way, Pm him & have a chat..

_________________
I used to be indecisive,
now I'm not so sure.....

hootied22

Joined: Mon Nov 08, 2010 8:04 am
Posts: 18
Location: Ormeau QLD

Posted: Fri Dec 03, 2010 8:44 am

PM sent.... see how I go...

Cheers.

hootied22

Joined: Mon Nov 08, 2010 8:04 am
Posts: 18
Location: Ormeau QLD

Posted: Sat Dec 11, 2010 7:14 am

For anyone who may need this info in the future, its the brown & white wire.
It is the second wire from the left on the plug to the distributor .

Cheers, thanks to 89 tintop for all his help.

Page 1 of 1

[ 13 posts ]

Board index » Talking About Stuff » Suzuki Talk

Who is online

Users browsing this forum: Google [Bot] and 305 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum