| Author |
Message |
sbbunno
Joined: Mon Mar 08, 2010 10:30 pm Posts: 420 Location: Perth/bunbury
|
 Posted: Sat Dec 04, 2010 1:10 pm |
|
hey guys looking at these rims, i got two questions for ya
http://www.lowrangeoffroad.com/suzuki/s ... 5r2-5.html
1.will the 2.5 inch backspace be to wide for my gards if i have a 1.5 inch rubber flare
i havn't had time to measure my track yet
2. Is there any store's in australia that can supply them or in WA
thanks in advance
scott
|
|
|
|
 |
alien
Joined: Wed Mar 24, 2010 10:30 pm Posts: 16343 Location: Perth
Vehicle: '92 Sierra, 1.6efi, SPOA, 31s.
|
 Posted: Sat Dec 04, 2010 3:08 pm |
|
|
theyre procomp series 52 rebadged...
i currently have a custom made rim to the same specs (15x7 -38mm) and i have 2" rubber flaring from clark rubber - the sidewalls stick oustide the rubber flares but the tread is covered - so it is legal.
so yes - too wide for 1.5" flares, and yes: clark rubber.
the extra width thus far is awesome too! way more stable on and off the road.
_________________ 
|
|
|
|
 |
sbbunno
Joined: Mon Mar 08, 2010 10:30 pm Posts: 420 Location: Perth/bunbury
|
 Posted: Sat Dec 04, 2010 4:03 pm |
|
yea lookin into them for stability after today
ok so they will work fine thanks
first time with lockers

|
|
|
|
 |
monley

az supporter
Joined: Wed Nov 24, 2010 7:58 am Posts: 11092 Location: Mandurah.W.A.
Vehicle: 84 LWB NT
|
 Posted: Sat Dec 04, 2010 10:39 pm |
|
|
Suzi store in perth carry them i think.
i
_________________ Tell my arse, he actually gives a crap!
|
|
|
|
 |
smiffkid

az supporter
Joined: Fri Aug 13, 2010 12:55 pm Posts: 3266 Location: perth wa
|
 Posted: Sat Dec 04, 2010 11:21 pm |
|
|
yea we can get them into, not sure on prices tho. also that is basically a procomp like alien said.
_________________ dodgy brothers mechanical
|
|
|
|
 |
smiffkid

az supporter
Joined: Fri Aug 13, 2010 12:55 pm Posts: 3266 Location: perth wa
|
 Posted: Sat Dec 04, 2010 11:22 pm |
|
|
my opinion would be do get a dynamic rim. we find procomps hard to ballance just about every time we get them and not as strong eithr, your dicision
_________________ dodgy brothers mechanical
|
|
|
|
 |
sbbunno
Joined: Mon Mar 08, 2010 10:30 pm Posts: 420 Location: Perth/bunbury
|
 Posted: Thu Dec 09, 2010 1:51 pm |
|
hey guys
getting real ticked talking to these tyre dealers, all telling me its illegal and i can't put wider rims on, and not helping me at all with finding a good deal
so hears the deal me and my mate are GOING to get wider rims because we WONT to and somewhat NEED to, what i would like to know is where and who do i talk to to get what i wont at the same price in the link at the top.
the link i posted above are the ones i wont but unfortunatley too much postage, and in terms of strentgh i do alot more slow crawling climps than thrashing my beast so these should do me fine
so i am looking for the same ones but in australia.
And smiffkid you have pm
thanks guys
any help would be REALLY aprecciated 
|
|
|
|
 |
Ben_Sierra

az supporter
Joined: Wed Sep 30, 2009 11:30 pm Posts: 4472 Location: Perth
|
 Posted: Thu Dec 09, 2010 2:03 pm |
|
|
Wow... Does anyone else (except alien) in this thread know any English??
_________________ I want my old sig back 
|
|
|
|
 |
MacDaddy

az supporter
Joined: Thu Mar 26, 2009 10:30 pm Posts: 10453 Location: Perth, Australia
Vehicle: Jeep
|
 Posted: Thu Dec 09, 2010 2:12 pm |
|
Ben_Sierra wrote: Wow... Does anyone else (except alien) in this thread know any English??
Settle... we are not allowed to pick on spelling anymore... and Royce may get an itchy trigger finger on the Ban button.... 
|
|
|
|
 |
sbbunno
Joined: Mon Mar 08, 2010 10:30 pm Posts: 420 Location: Perth/bunbury
|
 Posted: Thu Dec 09, 2010 2:20 pm |
|
yea sorry about that
iv chilled a bit
|
|
|
|
 |
BlueSuzy

az supporter
Joined: Sun May 04, 2008 11:30 pm Posts: 9716 Location: NSW
Vehicle: SJ51 LWB, SJ70 SWB
|
 Posted: Thu Dec 09, 2010 9:10 pm |
|
|
Lowrange rims are nice, but postage is the killer.
Get normal sunraisers.
i use 15x8 -28 King rims. Wide enough for me on 33's.
Cant order them ready to go for an f truck? Then pull up with a trailer?
NO NO NO NO amount of offset fixes the swb sierra wheel in the air technique..
_________________ BlueSuzy wrote: I'm over the G16b's.
|
|
|
|
 |
alien
Joined: Wed Mar 24, 2010 10:30 pm Posts: 16343 Location: Perth
Vehicle: '92 Sierra, 1.6efi, SPOA, 31s.
|
 Posted: Thu Dec 09, 2010 9:40 pm |
|
|
its how far in the air you want to go that more offset will affect =P haha
_________________ 
|
|
|
|
 |
sbbunno
Joined: Mon Mar 08, 2010 10:30 pm Posts: 420 Location: Perth/bunbury
|
 Posted: Thu Dec 09, 2010 9:59 pm |
|
haha yea im gonna stay 15x7 with the 2.5 backspacing.
im gonna get tj flares sometime to cover them fully, i know the one wheel in the air thing will proply alsways happen but i go pretty far sideways alot
http://www.youtube.com/watch?v=eD0WYG_Du50
this is a vid dad put togother of last weekend, unfortunatly the camera neve dose justus
at 2 minut's and 6.40 minuts is what im talking about.
|
|
|
|
 |
alien
Joined: Wed Mar 24, 2010 10:30 pm Posts: 16343 Location: Perth
Vehicle: '92 Sierra, 1.6efi, SPOA, 31s.
|
 Posted: Thu Dec 09, 2010 10:40 pm |
|
|
dont do the TJ flares!!! just get 50mm rubber flaring and screw it on... itll look way better than tj flares!
_________________ 
|
|
|
|
 |
sbbunno
Joined: Mon Mar 08, 2010 10:30 pm Posts: 420 Location: Perth/bunbury
|
 Posted: Thu Dec 09, 2010 10:49 pm |
|
 but i like the look of tj flares
is there an actual reason or.....
|
|
|
|
 |
11_evl
Joined: Tue Apr 10, 2007 11:30 pm Posts: 846 Location: logan reserve, Brisb
|
 Posted: Thu Dec 09, 2010 10:55 pm |
|
BlueSuzy wrote: Lowrange rims are nice, but postage is the killer.
Get normal sunraisers.
i use 15x8 -28 King rims. Wide enough for me on 33's.
Cant order them ready to go for an f truck? Then pull up with a trailer?
NO NO NO NO amount of offset fixes the swb sierra wheel in the air technique..
My 17x8 rims offer enough offset for me not to lift a wheel in the air
_________________ 92 sierra, 40" treps, full hydro, F&R steer, 106"W
|
|
|
|
 |
Benz
Joined: Mon Oct 27, 2008 10:30 pm Posts: 1006 Location: Cervantes WA
|
 Posted: Thu Dec 09, 2010 10:59 pm |
|
haha the look of the face of your passenger was good.
and if know what you mean about they tyre place...
get the same crap all the time...
I found it hard to find 215/75 tyres.... "no such size/never fit that size to a car" a few places told me or "never ever seen one" and they wouldn't even bother looking into it...
just keep looking around you will soon find someone who will help you out 
Last edited by Benz on Thu Dec 09, 2010 11:34 pm, edited 2 times in total.
|
|
|
|
 |
sbbunno
Joined: Mon Mar 08, 2010 10:30 pm Posts: 420 Location: Perth/bunbury
|
 Posted: Thu Dec 09, 2010 11:06 pm |
|
|
yea she was pretty funny maybe next time i might let her out
yea i mean its not hard i gave them the mesuarments and ask if they can get them in, so they tell me i cant do it and i cant bla bla bla
wich is bull ........
has any one got the number for suzuki store i cant seem to get it?
thanks
|
|
|
|
 |
alien
Joined: Wed Mar 24, 2010 10:30 pm Posts: 16343 Location: Perth
Vehicle: '92 Sierra, 1.6efi, SPOA, 31s.
|
 Posted: Thu Dec 09, 2010 11:08 pm |
|
www.suzistore.com.au - 9250 4650... not sure if they can get them though, if you go to the procomp website they list their suppliers in WA.
_________________ 
|
|
|
|
 |
sbbunno
Joined: Mon Mar 08, 2010 10:30 pm Posts: 420 Location: Perth/bunbury
|
 Posted: Thu Dec 09, 2010 11:18 pm |
|
|
ok thanks ill make a couple more call's
|
|
|
|
 |
atari4x4

az supporter
Joined: Mon Dec 11, 2006 10:30 pm Posts: 34842 Location: East Radelayed
Vehicle: SV420+SV620 Vitara's
|
 Posted: Thu Dec 09, 2010 11:44 pm |
|
|
i watched the video & must have blinked @ at 2 minutes and again 6.40 minutes.
_________________ You're just hating because you don't understand
|
|
|
|
 |
crewsy

az supporter
Joined: Wed Sep 29, 2010 12:41 pm Posts: 579 Location: Perth
|
 Posted: Thu Dec 09, 2010 11:56 pm |
|
alien wrote: dont do the TJ flares!!! just get 50mm rubber flaring and screw it on... itll look way better than tj flares!
aww I'm about to put TJ flares on
I think they look cool 
|
|
|
|
 |
Fatzook

az supporter
Joined: Sat Oct 27, 2007 11:30 pm Posts: 14977 Location: The Hills
Vehicle: Vitara, NGV
|
 Posted: Thu Dec 09, 2010 11:59 pm |
|
crewsy wrote: alien wrote: dont do the TJ flares!!! just get 50mm rubber flaring and screw it on... itll look way better than tj flares! aww I'm about to put TJ flares on I think they look cool 
TJ rears look good. TJ fronts are uglier than susan boyle 
_________________ 2013 GV 1998 SV420 ute
|
|
|
|
 |
crewsy

az supporter
Joined: Wed Sep 29, 2010 12:41 pm Posts: 579 Location: Perth
|
 Posted: Fri Dec 10, 2010 12:04 am |
|
Fatzook wrote: crewsy wrote: alien wrote: dont do the TJ flares!!! just get 50mm rubber flaring and screw it on... itll look way better than tj flares! aww I'm about to put TJ flares on I think they look cool  TJ rears look good. TJ fronts are uglier than susan boyle 
They look almost the same except for the fatter bit at the front for the indicators!
|
|
|
|
 |
atari4x4

az supporter
Joined: Mon Dec 11, 2006 10:30 pm Posts: 34842 Location: East Radelayed
Vehicle: SV420+SV620 Vitara's
|
 Posted: Fri Dec 10, 2010 12:11 am |
|
|
thats the bit that looks like susan boyle....
_________________ You're just hating because you don't understand
|
|
|
|
 |
alien
Joined: Wed Mar 24, 2010 10:30 pm Posts: 16343 Location: Perth
Vehicle: '92 Sierra, 1.6efi, SPOA, 31s.
|
 Posted: Fri Dec 10, 2010 12:32 am |
|
|
mmm i dunno - i just dont like the square-ness of them... theres no need for flares that big either, unless you're running hilux diffs and offset rims?
_________________ 
|
|
|
|
 |
atari4x4

az supporter
Joined: Mon Dec 11, 2006 10:30 pm Posts: 34842 Location: East Radelayed
Vehicle: SV420+SV620 Vitara's
|
 Posted: Fri Dec 10, 2010 12:36 am |
|
|
DBOR flares look good as they're similar profile shape to the WT flares.
_________________ You're just hating because you don't understand
|
|
|
|
 |
crewsy

az supporter
Joined: Wed Sep 29, 2010 12:41 pm Posts: 579 Location: Perth
|
 Posted: Fri Dec 10, 2010 12:37 am |
|
alien wrote: mmm i dunno - i just dont like the square-ness of them... theres no need for flares that big either, unless you're running hilux diffs and offset rims?
Yeah I'll be going 33's next with more offset so it should look in proportion
|
|
|
|
 |
BlueSuzy

az supporter
Joined: Sun May 04, 2008 11:30 pm Posts: 9716 Location: NSW
Vehicle: SJ51 LWB, SJ70 SWB
|
 Posted: Fri Dec 10, 2010 12:37 am |
|
11_evl wrote: BlueSuzy wrote: Lowrange rims are nice, but postage is the killer.
Get normal sunraisers.
i use 15x8 -28 King rims. Wide enough for me on 33's.
Cant order them ready to go for an f truck? Then pull up with a trailer?
NO NO NO NO amount of offset fixes the swb sierra wheel in the air technique.. My 17x8 rims offer enough offset for me not to lift a wheel in the air
OMG You must have 1000mm offset.
Your a totally different story.
Wheels in the air has no connection to wheel offset! Well, alittle, but not much.
_________________ BlueSuzy wrote: I'm over the G16b's.
|
|
|
|
 |
sbbunno
Joined: Mon Mar 08, 2010 10:30 pm Posts: 420 Location: Perth/bunbury
|
 Posted: Fri Dec 10, 2010 1:27 am |
|
called suzuki store they only have the ones i already have.
looks like my best bet is tyrepower for $125 a rim for the same ones on lowrange for $60 a rim
tj flares = awsome
|
|
|
|
 |
|