auszookers.com • View topic - 3 speed auto sierra

Board index » Talking About Stuff » Suzuki Talk

3 speed auto sierra

Page 1 of 1

[ 11 posts ]

Print view

Previous topic | Next topic

Author

Message

ajsr

az supporter

Joined: Sun Dec 28, 2008 10:30 pm
Posts: 3712
Location: melb

Posted: Wed Jan 05, 2011 9:11 am

can anyone tell me how much wider the trans tunnel needs to become for the auto to fit comfortably??
pics are good too if you have them
cheers

Rusho

Tubby Elfsdong

Joined: Sun Aug 02, 2009 11:30 pm
Posts: 6501
Location: Northside, Brisbane
Vehicle: Coily Sierra

Posted: Wed Jan 05, 2011 6:17 pm

Fatzook is in the process of widening his tunnel also. He is doing vit manual, however he made a template off Matt's ute which has the auto. At a guess there would be at least 60-80mm off each side and cut out almost the whole way up, then just plated back up if that makes sense???

_________________
Shep is a closet jimny lover!!!!

got_bar_work

Joined: Sat May 15, 2010 8:30 pm
Posts: 2214
Location: Brisbane
Vehicle: SQ625

Posted: Wed Jan 05, 2011 7:47 pm

Just go get a vit tunnel and weld it in
A guy in the club has done this and it looks good

dank

Joined: Sat Apr 05, 2008 10:30 pm
Posts: 1157
Location: VIC
Vehicle: WR250F/Jeep XJ

Posted: Wed Jan 05, 2011 11:05 pm

hey AJ, my application is a little different but to fit the corolla 3 spd in I had to stretch the tunnel on the passenger side out by around 40mm and about 20mm on the drivers side to clear the sump pan.

_________________
LIKE US ON FACEBOOK - KPD4x4

Fatzook

az supporter

Joined: Sat Oct 27, 2007 11:30 pm
Posts: 14977
Location: The Hills
Vehicle: Vitara, NGV

Posted: Wed Jan 05, 2011 11:29 pm

Assuming the pan and lines etc on the 3sp take up the same amount of room as the 4sp, I'd say a good 50mm per side, and back to where the floor steps up in the height from the footwell. I'll get a pic of my floor for you. Its all marked out ready to cut.

_________________
2013 GV
1998 SV420 ute

tanshi

az supporter

Joined: Tue Jan 09, 2007 10:30 pm
Posts: 7717
Location: Brisbane

Posted: Wed Jan 05, 2011 11:46 pm

i cut about 30mm out of passanger side for my manual.

ajsr

az supporter

Joined: Sun Dec 28, 2008 10:30 pm
Posts: 3712
Location: melb

Posted: Thu Jan 06, 2011 7:15 am

well I have done the drivers ide and rewelded got it out 60 mm on both sides so it should fit according to the tape measure :wink:

joe and gwagen have me a bit worried about the no body lift and 1.6 and auto though.

shep

Joined: Thu Mar 29, 2007 11:30 pm
Posts: 14498
Location: Here there everywhere
Vehicle: A manly awesome man jimny

Posted: Thu Jan 06, 2011 7:28 am

ajsr wrote:

joe and gwagen have me a bit worried about the no body lift and 1.6 and auto though.

ppffffttttt what would they know :roll:

_________________
JEEPJEEPJEEPJEEPJEEPJEEPJEEPJEEPJEEP

Fatzook

az supporter

Joined: Sat Oct 27, 2007 11:30 pm
Posts: 14977
Location: The Hills
Vehicle: Vitara, NGV

Posted: Thu Jan 06, 2011 7:42 am

ajsr wrote:

joe and gwagen have me a bit worried about the no body lift and 1.6 and auto though.

Why?

I got a 1.6 and auto under a 1L bonnet with no BL. Surely you can do it with a 1.3L bonnet :wink:

_________________
2013 GV
1998 SV420 ute

ajsr

az supporter

Joined: Sun Dec 28, 2008 10:30 pm
Posts: 3712
Location: melb

Posted: Thu Jan 06, 2011 7:53 am

Fatzook wrote:

ajsr wrote:

joe and gwagen have me a bit worried about the no body lift and 1.6 and auto though.

Why?

I got a 1.6 and auto under a 1L bonnet with no BL. Surely you can do it with a 1.3L bonnet :wink:

vit/x90 1.6 ???

Fatzook

az supporter

Joined: Sat Oct 27, 2007 11:30 pm
Posts: 14977
Location: The Hills
Vehicle: Vitara, NGV

Posted: Thu Jan 06, 2011 7:54 am

ajsr wrote:

Fatzook wrote:

ajsr wrote:

joe and gwagen have me a bit worried about the no body lift and 1.6 and auto though.

Why?

I got a 1.6 and auto under a 1L bonnet with no BL. Surely you can do it with a 1.3L bonnet :wink:

vit/x90 1.6 ???

X-90

Build: Work Horse

_________________
2013 GV
1998 SV420 ute

Page 1 of 1

[ 11 posts ]

Board index » Talking About Stuff » Suzuki Talk

Who is online

Users browsing this forum: Google [Bot] and 400 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum