| Author |
Message |
maddog
Joined: Mon Oct 11, 2010 10:51 pm Posts: 59 Location: ormeau qld
|
 Posted: Tue Jan 25, 2011 10:51 pm |
|
what size and what brand winch's is everyone using? is a 4000lb big enough for a zuk? 
|
|
|
|
 |
inbits
Joined: Mon Sep 13, 2010 8:30 am Posts: 600 Location: qld
|
 Posted: Tue Jan 25, 2011 10:53 pm |
|
|
For a Sierra a 6000lbs warn is a good size but any size above that will work I think 4000lbs is too small
|
|
|
|
 |
want33s

az supporter
Joined: Fri Nov 16, 2007 10:30 pm Posts: 8134 Location: Sunshine Coast Qld
|
 Posted: Tue Jan 25, 2011 11:06 pm |
|
|
I reckon for the money it will cost for winch, winch mount (bar), batteries, cables etc you are mad to use anything less than a 9500lb job.
|
|
|
|
 |
rpmwrx

az supporter
Joined: Sat Jul 19, 2008 11:30 pm Posts: 1303 Location: Geelong
Vehicle: JK Jeep, Sierra & Raptor
|
 Posted: Wed Jan 26, 2011 12:04 am |
|
|
I have a premier 6000 pound winch on my zook and i wish i had gone bigger. I had to winch a stuck Patrol ute once and my little winch really struggled... so i think want33s is on the money with his comments....
|
|
|
|
 |
PJ.zook

az supporter
Joined: Sat Oct 24, 2009 10:30 pm Posts: 845 Location: Melbourne
|
 Posted: Wed Jan 26, 2011 12:06 am |
|
|
Yeh I wouldnt bother with anything below 9500lb.
|
|
|
|
 |
cairns27
Joined: Thu Dec 23, 2010 7:42 pm Posts: 489 Location: Macleay Island
Vehicle: '95 Vitara JXI LWB G16B
|
 Posted: Wed Jan 26, 2011 2:18 am |
|
|
If ya not worried about work, a high lift jack works as a winch
|
|
|
|
 |
Teracis
Joined: Sat Dec 11, 2010 10:03 pm Posts: 2261 Location: Gold Coast
Vehicle: Daisy
|
 Posted: Wed Jan 26, 2011 4:15 am |
|
cairns27 wrote: If ya not worried about work, a high lift jack works as a winch
For that matter you might as well just carry a chain block instead of a whinch...
It would work, just takes a bloody long time!
|
|
|
|
 |
dogbox
Joined: Sun Jan 16, 2011 5:18 am Posts: 27 Location: nsw
|
 Posted: Wed Jan 26, 2011 4:35 am |
|
|
depends on what you want to winch if you just want a self recovery winch 6000 is ok
if you want to winch patrols out go 9000 or bigger
a 9000 winch will pull a jimny up a tree
|
|
|
|
 |
maddog
Joined: Mon Oct 11, 2010 10:51 pm Posts: 59 Location: ormeau qld
|
 Posted: Wed Jan 26, 2011 4:54 am |
|
|
yep self recovery, i own a patrol and there is no way i would attempt to put it out of a bog with the zuk! patrol has its own 12000lb winch anyway. was wondering how small i could go as the weight on a 12000 or 9500lb winch would be around 35-40kg.
|
|
|
|
 |
Built4thrashing
Joined: Wed May 21, 2008 11:30 pm Posts: 4972 Location: Dandenong .Vic
Vehicle: 1999 GV. Locked and Lifted
|
 Posted: Wed Jan 26, 2011 5:40 am |
|
|
I had a 12,000 on the sierra. putting a 9500 on the GV
_________________ B4T
Built by me to be driven like a rental
|
|
|
|
 |
mnemonix

az supporter
Joined: Sun Aug 16, 2009 11:30 pm Posts: 1409 Location: Newcastle NSW
Vehicle: '96 LWB trayback
|
 Posted: Wed Jan 26, 2011 5:48 am |
|
|
Have always used a warn 6000lb and it has never failed to recover my lwb.
Last week I purchased a tigerz11 10,000lb high speed. More so for the low load recovery speed.
_________________ Twin charged twin cam twin locked webwheeler
|
|
|
|
 |
ajsr

az supporter
Joined: Sun Dec 28, 2008 10:30 pm Posts: 3712 Location: melb
|
 Posted: Wed Jan 26, 2011 5:50 am |
|
|
personally I think 6,000 is heaps and mine is a $250 chinese one, Its pulled things like stuck trolls to two linked and busted zooks.
but 9000 would cost similar money, sup to you
|
|
|
|
 |
steve

I live here!
Joined: Sun Jun 11, 2006 11:30 pm Posts: 7681 Location: Brisbane
Vehicle: 75 Cruiser
|
 Posted: Wed Jan 26, 2011 6:21 am |
|
I have an 8000lbs with plasma, works fine, last month i pulled a Hilux out of a bog hole, it was buried halfway up it's diffs and was a dead pull.
So it's not just yourself you'll be recovering , it's over bigger heavier vehicles, so bigger is better maybe.
possibly agree with the 9500 suggestions though my 8000 works very well. I would forget the 4000 idea.
PS. problem with winches is you lose all your approach angle, unless you put it in the back 
|
|
|
|
 |
shep
Joined: Thu Mar 29, 2007 11:30 pm Posts: 14498 Location: Here there everywhere
Vehicle: A manly awesome man jimny
|
 Posted: Wed Jan 26, 2011 6:30 am |
|
|
i have a t-max 6500lb that has the same motor as there 12000lb jobbie and
when using a snatch block also has the same gearing.
so i have a fast winch that drags a sierra with ease and through a snatch block
will recover anything a 12000lb winch will.
the only thing is the spool is a bit smaller and only holds 20m of rope, i have 100m of winch extensions so it is no problem.
_________________ JEEPJEEPJEEPJEEPJEEPJEEPJEEPJEEPJEEP
|
|
|
|
 |
Hotshot993
Joined: Wed Dec 01, 2010 9:46 pm Posts: 1270 Location: Brisbane
|
 Posted: Wed Jan 26, 2011 8:15 am |
|
|
That sounds good shep. Is the much difference between the price of a 6500lb to around a 9-10000lb?
|
|
|
|
 |
shep
Joined: Thu Mar 29, 2007 11:30 pm Posts: 14498 Location: Here there everywhere
Vehicle: A manly awesome man jimny
|
 Posted: Wed Jan 26, 2011 8:37 am |
|
Hotshot993 wrote: That sounds good shep. Is the much difference between the price of a 6500lb to around a 9-10000lb?
i payed $725 in katherine. one of those dodgy drop shopping business
promised me one for $600 but i gave up after 6 months of waiting 
_________________ JEEPJEEPJEEPJEEPJEEPJEEPJEEPJEEPJEEP
|
|
|
|
 |
Hotshot993
Joined: Wed Dec 01, 2010 9:46 pm Posts: 1270 Location: Brisbane
|
 Posted: Wed Jan 26, 2011 9:07 am |
|
|
|
 |
|