[want33s]

FHA57 wrote:

just wondering if u had a handbrake lever to suit a 94 wide track the actual lever snapped but the cable is fine lol and how much?

PM sent.

[havabeer]

hi just wondering if you have a working bottom end off a F10a

or to a lesser extent a bare motor (no manifolds, carby, etc)

thanks heaps

[matfan]

Got any steering column uni-joints? It's for my swb wt tinny.
Cheers

[ras86]

hey just wondering if you have a gearbox for a 95 wt and how much? thanks ryan.

[want33s]

havabeer wrote:

hi just wondering if you have a working bottom end off a F10a

or to a lesser extent a bare motor (no manifolds, carby, etc)

thanks heaps

No 1.0 parts here...

matfan wrote:

Got any steering column uni-joints? It's for my swb wt tinny.
Cheers

Sure do.... $25 plus post.

ras86 wrote:

hey just wondering if you have a gearbox for a 95 wt and how much? thanks ryan.

yep.... PM sent

[Myles]

Hey bro! was just wondering if you had any window winding mechanisms for a coily? maybe a front control arm? i am in dire need of both lol. Cheers myles

[matfan]

want33s wrote:

matfan wrote:

Got any steering column uni-joints? It's for my swb wt tinny.
Cheers

Sure do.... $25 plus post.

Thanks for that, my brother managed to free up the old one so we're all good for now. Cheers anyway

[want33s]

Myles wrote:

Hey bro! was just wondering if you had any window winding mechanisms for a coily? maybe a front control arm? i am in dire need of both lol. Cheers myles

Not 100% sure but I think the window mechanism is same between leafy-coily.. If so I have a few here.

No coily arms though.

[anto86]

Any chance you'd have a WT 1.3 Transfer? Need one for my coily.

[want33s]

anto86 wrote:

Any chance you'd have a WT 1.3 Transfer? Need one for my coily.

I have a WT LWB here I'm wrecking but will have the check the flanges cause its an 88 model and some have NT flanges..
Will let you know.

[Teracis]

^^^ how did u go with this, I was going to pick it up for anto if it's the right type, I'll be heading to hervey bay tomorrow anyway so it'd save him shipping.

Also are the nt and wt cases the same apart from the flanges? if so he can just change them with the ones from lror yeh?

[want33s]

Teracis wrote:

^^^ how did u go with this, I was going to pick it up for anto if it's the right type, I'll be heading to hervey bay tomorrow anyway so it'd save him shipping.

Also are the nt and wt cases the same apart from the flanges? if so he can just change them with the ones from lror yeh?

Flanges are the only difference between 1.3 NT & WT cases.
The WT LWB does have NT flanges on it...

[Teracis]

Can the flanges be swapped easily? He's talking about getting the updated output shafts from lror anyway.

Also, do you have any brake lines for a WT rear? the ones that run along the axle, more specifically the one that runs from one side to the other (I'd have to check if it's the top or bottom one) as mine is munched!

[want33s]

Teracis wrote:

Can the flanges be swapped easily? He's talking about getting the updated output shafts from lror anyway.

Also, do you have any brake lines for a WT rear? the ones that run along the axle, more specifically the one that runs from one side to the other (I'd have to check if it's the top or bottom one) as mine is munched!

Flanges are swapped easily enough.
Sorry don't have a brake line....Any brake shop should be able to make one up in 5 minutes if you give them the old one.

[anto86]

How much for the transfer then? Are you open for pickup sometime saturday? And last but not least, its going in to a coily I'm pretty sure i need the mounts as well. Would you have them? And possibly the jackshaft as well?

Thanks

[want33s]

PM sent.

[Teracis]

want33s wrote:

Sorry don't have a brake line....Any brake shop should be able to make one up in 5 minutes if you give them the old one.

Cheers, I worked this one out when I went and had another look at it and realised it's just a bit of tube and not some fancy shmancy part that couldn't be replaced!

[11_evl]

Need 3 speed auto parts, what have you got or know of any?
Need drums and pumps!!

Anyone?
Pm me please

[want33s]

11_evl wrote:

Need 3 speed auto parts, what have you got or know of any?
Need drums and pumps!!

Anyone?
Pm me please

The latest Vit had 3 sp auto but is sold... I would have given it to you too....

[11_evl]

want33s wrote:

11_evl wrote:

Need 3 speed auto parts, what have you got or know of any?
Need drums and pumps!!

Anyone?
Pm me please

The latest Vit had 3 sp auto but is sold... I would have given it to you too....

Figures

[gdaymatee]

Do you have a transfer switch to suit 89 WT- its a 2-wire switch? If so can you give me a price?

Thanks

[want33s]

gdaymatee wrote:

Do you have a transfer switch to suit 89 WT- its a 2-wire switch? If so can you give me a price?

Thanks

PM sent

[jakeroberts]

looking for wide track flares with mounting brackets ect, passenger side early model mirror and a driver side window rubber for a softop nt 1985 sierra

[want33s]

jakeroberts wrote:

looking for wide track flares with mounting brackets ect, passenger side early model mirror and a driver side window rubber for a softop nt 1985 sierra

Got the flares and brackets.
Got the mirror.
Buy the bailey channel rubber from Clark Rubber or Suzistore.

[jakeroberts]

how much would you be looking at for the flares and mirror? and thanks mate i will have a look

[zukenutter]

Any Jimnys up there yet?

[want33s]

zukenutter wrote:

Any Jimnys up there yet?

You are funny

[zukenutter]

want33s wrote:

zukenutter wrote:

Any Jimnys up there yet?

You are funny

I can live in hope that one day wreckers will be overflowing with Jimnys. So I guess VVT Jimnys are out of the question.

[Diesel_Sierra]

1.0 Sierra transfer?

[zukenutter]

WT transfer?