auszookers.com • View topic

Board index » Shift It And Find It » I Want it I Want it I want it

1.3 Sierra carby

Page 1 of 1

[ 10 posts ]

Print view

Previous topic | Next topic

Author

Message

Bozzy

Joined: Mon Aug 30, 2010 11:26 am
Posts: 47
Location: Brisbane, northside

Posted: Tue Feb 01, 2011 2:51 am

I need a carby for a 1.3 sierra that works properly.

Thanks

Ben_Sierra

az supporter

Joined: Wed Sep 30, 2009 11:30 pm
Posts: 4472
Location: Perth

Posted: Tue Feb 01, 2011 3:11 am

Try Sunshine Coast Sierra Wreckers

_________________
I want my old sig back

ellis

Joined: Wed Sep 08, 2010 8:28 am
Posts: 445
Location: GYMPIE QLD

Posted: Tue Feb 01, 2011 6:24 am

whats wronng with your's

_________________
if u drive a loud toyota ute u drink rum

boostedbrick

az supporter

Joined: Tue Jun 29, 2010 7:44 am
Posts: 2003
Location: Brisbane
Vehicle: 2018 DMAX

Posted: Tue Feb 01, 2011 6:50 am

Got one here, unknown condition but i was told it ran well.. still fitted to the engine it came on.. southside

russty_2008

Joined: Thu Nov 26, 2009 10:30 pm
Posts: 435
Location: Gladstone QLD
Vehicle: G16b 83

Posted: Tue Feb 01, 2011 7:33 am

buy a 4k corolla carby

steak_knife

az supporter

Joined: Fri May 22, 2009 11:30 pm
Posts: 21335
Location: Smart Ass Island

Posted: Tue Feb 01, 2011 7:52 am

russty_2008 wrote:

buy a 4k corolla carby

I have a 5k carb here, unknown condition as I've never seen it on a car..

_________________
I used to be indecisive,
now I'm not so sure.....

christover1

az supporter

Joined: Tue Jul 15, 2008 11:30 pm
Posts: 8203
Location: Melbourne
Vehicle: Pajero 91 NH 3.0 SWB

Posted: Wed Feb 02, 2011 2:57 am

I have got one I can post you from Melbourne,
if You dont have any luck closer to home.

Complete, but never tried it on a car.

Only cost me $40 to buy a carby rebuild kit, look into that option.

And make sure entire fuel system is cleaned out, with new filters, so you dont stuff the new carb.
Good Luck
christover

_________________
VIC ZOOK CLUB
http://www.vic.suzuki4wd.com/forum/

Bozzy

Joined: Mon Aug 30, 2010 11:26 am
Posts: 47
Location: Brisbane, northside

Posted: Wed Feb 02, 2011 9:57 pm

Thanks for the replies. My carby is half fucked and I just don't have the time to dick around rebuilding it. I just want to be able to take mine off and replace it with one that someone can say works fine.

Excuse my ignorance but I'm guessing the corolla carbies need an adapter plate or something to fit?

steak_knife

az supporter

Joined: Fri May 22, 2009 11:30 pm
Posts: 21335
Location: Smart Ass Island

Posted: Thu Feb 03, 2011 5:58 am

Bozzy wrote:

Thanks for the replies. My carby is half fucked and I just don't have the time to dick around rebuilding it. I just want to be able to take mine off and replace it with one that someone can say works fine.

Excuse my ignorance but I'm guessing the corolla carbies need an adapter plate or something to fit?

Same bolt pattern.

_________________
I used to be indecisive,
now I'm not so sure.....

chillin24x7

Joined: Wed Sep 08, 2010 5:12 am
Posts: 47
Location: Jimboomba

Posted: Mon Feb 07, 2011 5:56 am

any corolla of the 4k range carb fits the only thing you have to do is put studs in and change the acl cable bracket as the ball on the zooks are little bit bigger and get a bolt that fits the air cleaner but they dont have auto cold start there cable

Page 1 of 1

[ 10 posts ]

Board index » Shift It And Find It » I Want it I Want it I want it

Who is online

Users browsing this forum: No registered users and 43 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum