auszookers.com • View topic - Coily Seats in a Leafy Sierra

Board index » Talking About Stuff » Suzuki Talk

Coily Seats in a Leafy Sierra

Page 1 of 1

[ 9 posts ]

Print view

Previous topic | Next topic

Author

Message

ZookFisher

Joined: Thu Nov 11, 2010 7:47 am
Posts: 102
Location: Redcliffe

Posted: Mon Feb 07, 2011 11:01 pm

Possibly dumb question but does coily seats fit into a leaf sierra?
like does all the brackets and everything line up or would you need to mod it abit.

_________________
Yeah Cheers Kent~!

Rusho

Tubby Elfsdong

Joined: Sun Aug 02, 2009 11:30 pm
Posts: 6501
Location: Northside, Brisbane
Vehicle: Coily Sierra

Posted: Tue Feb 08, 2011 1:01 am

ZookFisher wrote:

Possibly dumb question but does coily seats fit into a leaf sierra?
like does all the brackets and everything line up or would you need to mod it abit.

Completely different brackets mate. It would be far easier to put aftermarket seats in a leafy then coily ones

_________________
Shep is a closet jimny lover!!!!

Reubs

Joined: Wed Sep 09, 2009 11:30 pm
Posts: 1522
Location: Brisbane
Vehicle: SJ80, SE416

Posted: Tue Feb 08, 2011 1:02 am

ZookFisher wrote:

Possibly dumb question but does coily seats fit into a leaf sierra?
like does all the brackets and everything line up or would you need to mod it abit.

Rails are completely different. Coily seats have side mount rails - leafy seats are top mount.

ZookFisher

Joined: Thu Nov 11, 2010 7:47 am
Posts: 102
Location: Redcliffe

Posted: Tue Feb 08, 2011 1:28 am

true righto thanks heaps guys

_________________
Yeah Cheers Kent~!

Daz7

Joined: Mon May 31, 2010 3:04 am
Posts: 242
Location: Sydney

Posted: Tue Feb 08, 2011 3:20 am

Bugger have a set of these in the shed...

Fatzook

az supporter

Joined: Sat Oct 27, 2007 11:30 pm
Posts: 14977
Location: The Hills
Vehicle: Vitara, NGV

Posted: Tue Feb 08, 2011 7:06 am

Daz7 wrote:

Bugger have a set of these in the shed...

The bin is a better place for them :wink:

_________________
2013 GV
1998 SV420 ute

kmathams

newbie

Joined: Wed Jul 26, 2017 5:06 pm
Posts: 1
Vehicle: 96 suzuki sierra

Posted: Thu Aug 10, 2017 8:56 pm

Reubs wrote:

ZookFisher wrote:

Possibly dumb question but does coily seats fit into a leaf sierra?
like does all the brackets and everything line up or would you need to mod it abit.

Rails are completely different. Coily seats have side mount rails - leafy seats are top mount.

Are the bottom mounts, that go into the floor the same though?

ZUZUKI

Joined: Thu Sep 02, 2010 5:50 am
Posts: 427
Location: Melbourne
Vehicle: '85 Sierra LWB, '99 GV 2.5L

Posted: Fri Aug 18, 2017 9:26 pm

Nope,
Leafy rails won't bolt to a coily seat, or visa versa, the angle of the ends is different.
You can cut bits of the Leaf rail up & weld to the Coily rail, but it's all a bit of a hack & unlikely to pass any sort of engineering inspection.
Rgs, Michael

ZUZUKI

Joined: Thu Sep 02, 2010 5:50 am
Posts: 427
Location: Melbourne
Vehicle: '85 Sierra LWB, '99 GV 2.5L

Posted: Thu Aug 24, 2017 10:59 pm

Ok, against my better judgement, I've just done this - fit Coily seats into a Leafer.
Ended up cutting all the mounting bracketary off the coily rails & when from there.
Didn't want to change the car, so leafy seats can still be bolted in.
The rails on the coily are not even across the car - 20mm difference - means the seats ended up being 20mm taller than they should be - still sort of feels ok & you'd get used to it.
P/side needed rail 'packers' to the tune of 70mm & 90mm to line up with the drivers.
So, doable - yes, if you have a welder & some nouse.
Recommended - no, took hours to sort it & I mean about 8-10.
Would it pass a RWC inspection? probably not if the tester knew what he was looking at.
Rgs, Michael

Page 1 of 1

[ 9 posts ]

Board index » Talking About Stuff » Suzuki Talk

Who is online

Users browsing this forum: No registered users and 650 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum