| Author |
Message |
Benz
Joined: Mon Oct 27, 2008 10:30 pm Posts: 1006 Location: Cervantes WA
|
 Posted: Sun Feb 20, 2011 1:20 am |
|
|
have broken a cv and in a attempt to get the jimny back on the road as it is my daily have come up with the plan of dropping the front diff oil and taking both the axle and broken cv out.
this will only be for a week or two and will only be driven in 2wd...
cant see anything wrong with doing this but if anyone can...
please don't let me learn the hard way
thanx guys
|
|
|
|
 |
smiffkid

az supporter
Joined: Fri Aug 13, 2010 12:55 pm Posts: 3266 Location: perth wa
|
 Posted: Sun Feb 20, 2011 1:25 am |
|
|
take your front drive shaft out, and it will be fine,
_________________ dodgy brothers mechanical
|
|
|
|
 |
royce

omnipotent being
Joined: Sun Jun 11, 2006 11:30 pm Posts: 17216 Location: Pluto
|
 Posted: Sun Feb 20, 2011 1:26 am |
|
|
pull the front driveshaft out as well, be a lot less chance of the diff turning then
|
|
|
|
 |
Benz
Joined: Mon Oct 27, 2008 10:30 pm Posts: 1006 Location: Cervantes WA
|
 Posted: Sun Feb 20, 2011 1:35 am |
|
|
|
 |
dm90
Joined: Sun Nov 29, 2009 10:30 pm Posts: 4349 Location: Perth
|
 Posted: Sun Feb 20, 2011 1:43 am |
|
|
sorry for a thread hi jack, but i have wondered, when out wheeling, if you put a hole in your rear diff, can you put it in 4H and disconnect the rear drive shaft so it runs as a front wheel drive?????
|
|
|
|
 |
inbits
Joined: Mon Sep 13, 2010 8:30 am Posts: 600 Location: qld
|
 Posted: Sun Feb 20, 2011 1:45 am |
|
dm90 wrote: sorry for a thread hi jack, but i have wondered, when out wheeling, if you put a hole in your rear diff, can you put it in 4H and disconnect the rear drive shaft so it runs as a front wheel drive?????
no because your rear diff still spins
|
|
|
|
 |
alien
Joined: Wed Mar 24, 2010 10:30 pm Posts: 16343 Location: Perth
Vehicle: '92 Sierra, 1.6efi, SPOA, 31s.
|
 Posted: Sun Feb 20, 2011 1:46 am |
|
|
you can on a sierra, i'd assume jimnys are the same but from memory vitaras (maybe just GV?) will spill all their oil if you disconnect the shaft.
the diff would still turn though so it wouldnt work if you had destroyed an axle etc.
_________________ 
Last edited by alien on Sun Feb 20, 2011 1:47 am, edited 1 time in total.
|
|
|
|
 |
royce

omnipotent being
Joined: Sun Jun 11, 2006 11:30 pm Posts: 17216 Location: Pluto
|
 Posted: Sun Feb 20, 2011 1:47 am |
|
diff still turns
you would be best off trying to patch the hole with what you can and keeping oil in there 
|
|
|
|
 |
Benz
Joined: Mon Oct 27, 2008 10:30 pm Posts: 1006 Location: Cervantes WA
|
 Posted: Sun Feb 20, 2011 2:20 am |
|
|
i know on other 4wd's you can easily pull the whole rear axle's out of the difs pretty easily.
|
|
|
|
 |
steak_knife

az supporter
Joined: Fri May 22, 2009 11:30 pm Posts: 21335 Location: Smart Ass Island
|
 Posted: Sun Feb 20, 2011 2:23 am |
|
Benz2369 wrote: i know on other 4wd's you can easily pull the whole rear axle's out of the difs pretty easily.
Floating axle's yes....
take you front drive shaft out & you'll be fine..
_________________ I used to be indecisive,
now I'm not so sure.....
|
|
|
|
 |
MacDaddy

az supporter
Joined: Thu Mar 26, 2009 10:30 pm Posts: 10453 Location: Perth, Australia
Vehicle: Jeep
|
 Posted: Sun Feb 20, 2011 6:51 am |
|
|
Not sure it will work for newer model zooks, but my bro broke both rear axles being an idiot in his old 3cyl Zook, in the middle of nowhere many years ago, he was stuck, but got out by putting it in 4wd high, drove over 150kms like that to get it fixed, didnt do any damage to the front axles...
|
|
|
|
 |
Benz
Joined: Mon Oct 27, 2008 10:30 pm Posts: 1006 Location: Cervantes WA
|
 Posted: Sun Feb 20, 2011 8:48 am |
|
|
all sorted =]
will find out how much a new cv will cost me on monday.....
|
|
|
|
 |
|