| Author |
Message |
5ierra
Joined: Tue Mar 09, 2010 10:30 pm Posts: 1645 Location: Ipswich
|
 Posted: Sun Feb 06, 2011 10:45 pm |
|
Hey guys,
FS:
2x Steel sierra diff housings (no ring or pinion, its only the steel outter casing they fix into)
$25 each or both for $40
Timber Frame Double Bed with mattress - $280
Steel Frame Bed with mattress - $150
Alpine V-Power amp 360Watt MRP-F250 Amp - $130
Peavey Guitar Amp + Pearl river guitar - $120
51cm CRT TV "LG" with remote - offers?
Please PM if interested.
Cheers, 5ierra
Last edited by 5ierra on Mon Feb 28, 2011 6:58 am, edited 7 times in total.
|
|
|
|
 |
5ierra
Joined: Tue Mar 09, 2010 10:30 pm Posts: 1645 Location: Ipswich
|
 Posted: Wed Feb 09, 2011 7:54 pm |
|
|
|
 |
Lilrocket
Joined: Fri Feb 11, 2011 9:02 am Posts: 5 Location: Brisbane
|
 Posted: Fri Feb 11, 2011 9:07 am |
|
|
Hey i am interested in the CVs would like to pick up on sat 12th if possible. Please ring or text my phone 0413 363 457. Cheers Darren
|
|
|
|
 |
5ierra
Joined: Tue Mar 09, 2010 10:30 pm Posts: 1645 Location: Ipswich
|
 Posted: Fri Feb 11, 2011 10:46 am |
|
Lilrocket wrote: Hey i am interested in the CVs would like to pick up on sat 12th if possible. Please ring or text my phone 0413 363 457. Cheers Darren
texted 
|
|
|
|
 |
5ierra
Joined: Tue Mar 09, 2010 10:30 pm Posts: 1645 Location: Ipswich
|
 Posted: Mon Feb 14, 2011 7:12 pm |
|
|
|
 |
5ierra
Joined: Tue Mar 09, 2010 10:30 pm Posts: 1645 Location: Ipswich
|
 Posted: Sun Feb 20, 2011 7:15 pm |
|
|
|
 |
tonka_tuff

az supporter
Joined: Mon Jul 06, 2009 11:30 pm Posts: 1017 Location: brisbane QLD
Vehicle: 91 swb vit 5"lift 31's.
|
 Posted: Wed Feb 23, 2011 5:18 am |
|
|
hey mate are they a straight bolt in? i have a 91 vit manual.. if so ill take one off you this friday.. haha
|
|
|
|
 |
tanshi

az supporter
Joined: Tue Jan 09, 2007 10:30 pm Posts: 7717 Location: Brisbane
|
 Posted: Wed Feb 23, 2011 5:19 am |
|
tonka_tuff wrote: hey mate are they a straight bolt in? i have a 91 vit manual.. if so ill take one off you this friday.. haha
no mate no good for a vitara
|
|
|
|
 |
tonka_tuff

az supporter
Joined: Mon Jul 06, 2009 11:30 pm Posts: 1017 Location: brisbane QLD
Vehicle: 91 swb vit 5"lift 31's.
|
 Posted: Wed Feb 23, 2011 5:57 am |
|
oh haah my bad i read vitara for some stupid reason..
my bad.. haha nah wont be coming to get them.. lol
|
|
|
|
 |
5ierra
Joined: Tue Mar 09, 2010 10:30 pm Posts: 1645 Location: Ipswich
|
 Posted: Wed Feb 23, 2011 8:01 am |
|
|
They are just rear housings.... As far as i know you can put there running gear ( R&P etc) in them and run them in the front of vits to replace the alloy housing...
Thats what i've always been lead to believe??? Thats why i had them, i had two alloy vitara centers in my sierra but i went back to 3.7 ratio difs.
|
|
|
|
 |
atari4x4

az supporter
Joined: Mon Dec 11, 2006 10:30 pm Posts: 34842 Location: East Radelayed
Vehicle: SV420+SV620 Vitara's
|
 Posted: Wed Feb 23, 2011 8:07 am |
|
5ierra wrote: They are just rear housings.... As far as i know you can put there running gear ( R&P etc) in them and run them in the front of vits to replace the alloy housing...
Thats what i've always been lead to believe??? Thats why i had them, i had two alloy vitara centers in my sierra but i went back to 3.7 ratio difs.
The Sierra carriers don't have the pinion mount that the Vitara alloy carriers have, a mount will need to be fabbed up. Then you still need the Steel GV housing or the Calmini Anvil. 
_________________ You're just hating because you don't understand
|
|
|
|
 |
5ierra
Joined: Tue Mar 09, 2010 10:30 pm Posts: 1645 Location: Ipswich
|
 Posted: Wed Feb 23, 2011 10:02 am |
|
atari4x4 wrote: 5ierra wrote: They are just rear housings.... As far as i know you can put there running gear ( R&P etc) in them and run them in the front of vits to replace the alloy housing...
Thats what i've always been lead to believe??? Thats why i had them, i had two alloy vitara centers in my sierra but i went back to 3.7 ratio difs. The Sierra carriers don't have the pinion mount that the Vitara alloy carriers have, a mount will need to be fabbed up. Then you still need the Steel GV housing or the Calmini Anvil. 
Fuck, isnt that a pain in the ass then 
|
|
|
|
 |
Vash
Joined: Fri Feb 04, 2011 3:12 am Posts: 130 Location: Sydney
|
 Posted: Wed Feb 23, 2011 10:37 pm |
|
|
Do new steering dampers include the bushes at the end and all that jazz?
And it'll fit my 95' sierra ?
ill grab it if so!
|
|
|
|
 |
5ierra
Joined: Tue Mar 09, 2010 10:30 pm Posts: 1645 Location: Ipswich
|
 Posted: Mon Feb 28, 2011 4:20 am |
|
|
|
 |
5ierra
Joined: Tue Mar 09, 2010 10:30 pm Posts: 1645 Location: Ipswich
|
 Posted: Mon Feb 28, 2011 6:58 am |
|
|
|
 |
5ierra
Joined: Tue Mar 09, 2010 10:30 pm Posts: 1645 Location: Ipswich
|
 Posted: Wed Mar 02, 2011 2:11 am |
|
|
|
 |
5ierra
Joined: Tue Mar 09, 2010 10:30 pm Posts: 1645 Location: Ipswich
|
 Posted: Sat Mar 05, 2011 6:48 am |
|
|
|
 |
|