auszookers.com • View topic

Board index » Shift It And Find It » Getting rid of stuff

wrecking baleno

Page 1 of 1

[ 9 posts ]

Print view

Previous topic | Next topic

Author

Message

russty_2008

Joined: Thu Nov 26, 2009 10:30 pm
Posts: 435
Location: Gladstone QLD
Vehicle: G16b 83

Posted: Tue Feb 22, 2011 5:16 am

hey wrecking a baleno everything apart from the engine loom and computer if u need something shoot me a pm http://cgi.ebay.com.au/ws/eBayISAPI.dll ... K:MEWAX:IT all the panels are straight but the clear is coming off power windows work power mirrors work its got lowered suspension 15" mags tyres about 60 percent

an will have the stock 1.3 engine for sale soon not the best condition but still runs fine

Fatzook

az supporter

Joined: Sat Oct 27, 2007 11:30 pm
Posts: 14977
Location: The Hills
Vehicle: Vitara, NGV

Posted: Tue Feb 22, 2011 5:26 am

Just wack it back up on ebay. There are than many balenos without motors sitting around, that moving parts will take forever. Put it up cheap and make it someone elses problem :lol:

_________________
2013 GV
1998 SV420 ute

russty_2008

Joined: Thu Nov 26, 2009 10:30 pm
Posts: 435
Location: Gladstone QLD
Vehicle: G16b 83

Posted: Tue Feb 22, 2011 5:32 am

Fatzook wrote:

Just wack it back up on ebay. There are than many balenos without motors sitting around, that moving parts will take forever. Put it up cheap and make it someone elses problem :lol:

ok cheers mate

94BAZOOKA

Joined: Mon Jan 17, 2011 8:40 am
Posts: 537
Location: central coast NSW

Posted: Tue Feb 22, 2011 5:49 am

Pm sent

_________________
F#%ING [P] PLATER

xedent

az supporter

Joined: Mon Jun 15, 2009 11:30 pm
Posts: 895
Location: Sunshine Coast, QLD
Vehicle: LWB Maruthi on WT Diffs!

Posted: Tue Feb 22, 2011 5:50 am

i hope that it is not a dizzy g16b that you got cause you will need to pull the grinder out if it is....

_________________
My Maruti build, Click WWW

Fatzook

az supporter

Joined: Sat Oct 27, 2007 11:30 pm
Posts: 14977
Location: The Hills
Vehicle: Vitara, NGV

Posted: Tue Feb 22, 2011 6:14 am

xedent wrote:

i hope that it is not a dizzy g16b that you got cause you will need to pull the grinder out if it is....

And remove the heater core :wink:

_________________
2013 GV
1998 SV420 ute

russty_2008

Joined: Thu Nov 26, 2009 10:30 pm
Posts: 435
Location: Gladstone QLD
Vehicle: G16b 83

Posted: Tue Feb 22, 2011 7:07 am

ha ha yes it is the dizzy one but my zook isnt registed so dont really care does anyone know roughly how far past the fire wall the dizzy will sit with a ben t adaptor

Fatzook

az supporter

Joined: Sat Oct 27, 2007 11:30 pm
Posts: 14977
Location: The Hills
Vehicle: Vitara, NGV

Posted: Tue Feb 22, 2011 7:11 am

russty_2008 wrote:

ha ha yes it is the dizzy one but my zook isnt registed so dont really care does anyone know roughly how far past the fire wall the dizzy will sit with a ben t adaptor

100-150 mm at a guess. Even then, you will need to remove the motor to get the dizzy cap off :roll:

_________________
2013 GV
1998 SV420 ute

xedent

az supporter

Joined: Mon Jun 15, 2009 11:30 pm
Posts: 895
Location: Sunshine Coast, QLD
Vehicle: LWB Maruthi on WT Diffs!

Posted: Tue Feb 22, 2011 7:13 am

well using a thermosat house from a swift i have about 10mm of room, and the dizzy model goes a lot farther then that.

_________________
My Maruti build, Click WWW

Page 1 of 1

[ 9 posts ]

Board index » Shift It And Find It » Getting rid of stuff

Who is online

Users browsing this forum: No registered users and 3 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum