auszookers.com • View topic - [QLD] '97 X-90 G16B low kms

Board index » Shift It And Find It » Getting rid of stuff

[QLD] '97 X-90 G16B low kms

Page 1 of 1

[ 12 posts ]

Print view

Previous topic | Next topic

Author

Message

Fatzook

az supporter

Joined: Sat Oct 27, 2007 11:30 pm
Posts: 14977
Location: The Hills
Vehicle: Vitara, NGV

Posted: Sun Feb 27, 2011 12:51 pm

Well since I am putting the J20a in my ute, the G16B is up for grabs. This will not be available for a couple of weeks, but wil be sold as a near complete engine conversion package.

Parts that will be supplied are as follows....

X-90 G16B. Had 56000kms when removed from X-90. Has since done 15000 odd floorless kms in my ute.
Starter motor (small body)
Extractors (surface rust, but they are around 12 months old)
Custom air intake pipe with Unifilter
Wiring loom, already stripped and labeled. Just needs a quick tidy up.
ECU
Motor has flywheel, but will require a new clutch.

Motor was serviced every 5 or 6000km whilst in my posession. Was drained of oil last week before I knew I was selling, but was due for a service anyway.

Things you will need....

Engine mounts
BenT kit or vitara 5sp
Clutch maybe? ( if yours is boned)
Viscous fan (if you shoose to use one)
and thats it AFAIK.
EFI fuel pump ( I have a NEW! bosch VL external pump that owes me $180. Sell $140)

Item is located in Brisbane. I can ship at buyers expense.

Asking $1500 obo.

PM me for more info.

Cheers
Peter

_________________
2013 GV
1998 SV420 ute

HDOGG

Joined: Wed Feb 09, 2011 4:36 am
Posts: 55
Location: Ipswich

Posted: Mon Feb 28, 2011 7:19 pm

Hi. Do you still the engine ???

_________________
Better to be dead and cool than alive and uncool

Fatzook

az supporter

Joined: Sat Oct 27, 2007 11:30 pm
Posts: 14977
Location: The Hills
Vehicle: Vitara, NGV

Posted: Mon Feb 28, 2011 10:55 pm

Yep. Had a few offers. No cash in my hand though, so its still available :wink:

_________________
2013 GV
1998 SV420 ute

HDOGG

Joined: Wed Feb 09, 2011 4:36 am
Posts: 55
Location: Ipswich

Posted: Tue Mar 01, 2011 1:35 am

kool. would it be a straight forward swap into a 94 vitara that was a g16a ???

_________________
Better to be dead and cool than alive and uncool

Fatzook

az supporter

Joined: Sat Oct 27, 2007 11:30 pm
Posts: 14977
Location: The Hills
Vehicle: Vitara, NGV

Posted: Tue Mar 01, 2011 4:26 am

HDOGG wrote:

kool. would it be a straight forward swap into a 94 vitara that was a g16a ???

No. The loom has been modified to suit a sierra.

_________________
2013 GV
1998 SV420 ute

Fatzook

az supporter

Joined: Sat Oct 27, 2007 11:30 pm
Posts: 14977
Location: The Hills
Vehicle: Vitara, NGV

Posted: Tue Mar 01, 2011 4:27 am

SOLD pending payment.

_________________
2013 GV
1998 SV420 ute

Crunched

Joined: Fri Mar 05, 2010 10:30 pm
Posts: 684
Location: Sth Bris
Vehicle: Sierra Utey!

Posted: Tue Mar 01, 2011 4:33 am

Fark that was quick. I was hoping you still had the extractors and EFI pump..

_________________
My ute..

Fatzook

az supporter

Joined: Sat Oct 27, 2007 11:30 pm
Posts: 14977
Location: The Hills
Vehicle: Vitara, NGV

Posted: Tue Mar 01, 2011 4:53 am

Sold with motor sorry.

Why do you need one? There is a swimmer pump in that tank I sold you

_________________
2013 GV
1998 SV420 ute

Crunched

Joined: Fri Mar 05, 2010 10:30 pm
Posts: 684
Location: Sth Bris
Vehicle: Sierra Utey!

Posted: Tue Mar 01, 2011 5:20 am

The pump was for something different - an RX7 (not mine, don't tar me with that brush).

_________________
My ute..

Fatzook

az supporter

Joined: Sat Oct 27, 2007 11:30 pm
Posts: 14977
Location: The Hills
Vehicle: Vitara, NGV

Posted: Tue Mar 01, 2011 5:25 am

Crunched wrote:

(not mine, don't tar me with that brush).

I just put the brush down :lol:

_________________
2013 GV
1998 SV420 ute

DarkHorse

az supporter

Joined: Wed Apr 14, 2010 11:30 pm
Posts: 5413
Vehicle: 08 SV650

Posted: Tue Mar 01, 2011 1:00 pm

HDOGG wrote:

kool. would it be a straight forward swap into a 94 vitara that was a g16a ???

I'll have one soon if Pete man's up and agrees to 'help' me put the SR20 in mine...

Fatzook

az supporter

Joined: Sat Oct 27, 2007 11:30 pm
Posts: 14977
Location: The Hills
Vehicle: Vitara, NGV

Posted: Tue Mar 01, 2011 2:15 pm

DarkHorse wrote:

HDOGG wrote:

kool. would it be a straight forward swap into a 94 vitara that was a g16a ???

I'll have one soon if Pete man's up and agrees to 'help' me put the SR20 in mine...

Yeah i'm not sure I'd get all the way through the 20kg bag of cement I'd need to achieve the correct level of 'hardenthefuckup' :cry:

_________________
2013 GV
1998 SV420 ute

Page 1 of 1

[ 12 posts ]

Board index » Shift It And Find It » Getting rid of stuff

Who is online

Users browsing this forum: No registered users and 7 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum