auszookers.com • View topic - QLD Exhaust system

Board index » Talking About Stuff » Suzuki Talk

QLD Exhaust system

Page 1 of 1

[ 18 posts ]

Print view

Previous topic | Next topic

Author

Message

ealfa

Joined: Tue Aug 03, 2010 7:56 am
Posts: 198
Location: brisbane

Posted: Mon Mar 07, 2011 9:56 pm

i want to upgrade the exhaust system. 2inch with extractors got quoted 580 all up is this cheap?

Or wheres there best place to go ??

thanks

Hotshot993

Joined: Wed Dec 01, 2010 9:46 pm
Posts: 1270
Location: Brisbane

Posted: Mon Mar 07, 2011 9:57 pm

That's good. I got quoted the same. Fatzook got it for me and really cheap. So that must be good

S13RR4

Joined: Sat Aug 22, 2009 11:30 pm
Posts: 1072
Location: Sunshine Coast

Posted: Mon Mar 07, 2011 10:00 pm

sounds better then the $900 + that some said they got quoted down south

_________________
My Rig --> Click WWW

ealfa

Joined: Tue Aug 03, 2010 7:56 am
Posts: 198
Location: brisbane

Posted: Mon Mar 07, 2011 10:11 pm

Ok sweet

zooky08

az supporter

Joined: Fri Nov 27, 2009 10:30 pm
Posts: 3426
Location: imbil/gympie. qld
Vehicle: 03 Jimny

Posted: Mon Mar 07, 2011 10:56 pm

I got quoted $460 for two length of 2inch exaust
From extractors to cat and from cat to muffler
So $580 is a good price

_________________
03 Jimny 30 km2s 75mm lift f&r locked winch

brodie03

az supporter

Joined: Fri Apr 23, 2010 11:30 pm
Posts: 108
Location: Brisbane
Vehicle: SWB GV

Posted: Mon Mar 07, 2011 11:10 pm

I went over to Exotic Exhausts in Sumner Park (westside of Brisbane) before the floods and spoke to them about putting about 1.75 inch extractors and a 2inch exhaust system through my car. Wasn't a full quote ie, piece of paper with full costings, but the boss said I would be looking at around $400. They could be worth a shot, I am unsure whether they are up and running again yet, as I am assuming that they went under.

matfan

az supporter

Joined: Sat May 29, 2010 4:27 pm
Posts: 935
Location: Paraguay
Vehicle: WT Tinny, NT lwb, 1L lwb

Posted: Tue Mar 08, 2011 12:00 am

ealfa wrote:

i want to upgrade the exhaust system. 2inch with extractors got quoted 580 all up is this cheap?

Or wheres there best place to go ??

thanks

Where was this quote from? Sounds good.

ealfa

Joined: Tue Aug 03, 2010 7:56 am
Posts: 198
Location: brisbane

Posted: Tue Mar 08, 2011 12:22 am

Moss st right price

luke4130

Joined: Sun Jan 24, 2010 10:30 pm
Posts: 18
Location: Brisbane

Posted: Tue Mar 08, 2011 7:21 am

Exotic Exhaust didn't go under (only just). Used to work next door and all I can say is that their custom headers are works of art. I never thought they'd be cheap as the saying goes "you get what you pay for". All i can say is that if your happy with a price from them, then I'd go for it. Their quality is right up the top..

IMOHO,

Luke.

whincup

az supporter

Joined: Sat Apr 17, 2010 11:30 pm
Posts: 1588
Location: Gracemere, QLD
Vehicle: '94 suzuki maruti

Posted: Tue Mar 08, 2011 7:38 am

well place up here charged me $380 for extractors, and gave me a quote of $420 for mandrel bent 2" plus a high flow cat. i'd say thats a good price for a full system.

monley

az supporter

Joined: Wed Nov 24, 2010 7:58 am
Posts: 11092
Location: Mandurah.W.A.
Vehicle: 84 LWB NT

Posted: Tue Mar 08, 2011 8:30 am

Do any of you's put bellows in your exhaust systems?

_________________
Tell my arse, he actually gives a crap!

stiky

Joined: Thu Jan 20, 2011 10:15 am
Posts: 151
Location: brisbane

Posted: Tue Mar 08, 2011 8:38 am

Bellow???

alien

Joined: Wed Mar 24, 2010 10:30 pm
Posts: 16343
Location: Perth
Vehicle: '92 Sierra, 1.6efi, SPOA, 31s.

Posted: Tue Mar 08, 2011 8:38 am

doubtful...

suzistore have a sierra in there right now (project car) that running a 1.6 and extractors to no pipe (its not fitted yet) and it still sounds quieter than most motorbikes on the road today =P

_________________

monley

az supporter

Joined: Wed Nov 24, 2010 7:58 am
Posts: 11092
Location: Mandurah.W.A.
Vehicle: 84 LWB NT

Posted: Tue Mar 08, 2011 8:43 am

stiky wrote:

Bellow???

It goes in as part of the exhaust, it a wire mesh thing about 80mm long and allows the exhaust to move around a bit more to put less strain on the rubbers, also helps prevent welds cracking.

I'll post are pic of mine.

_________________
Tell my arse, he actually gives a crap!

ealfa

Joined: Tue Aug 03, 2010 7:56 am
Posts: 198
Location: brisbane

Posted: Tue Mar 08, 2011 8:43 am

i had that on my old car not sure if they do it for the vit

monley

az supporter

Joined: Wed Nov 24, 2010 7:58 am
Posts: 11092
Location: Mandurah.W.A.
Vehicle: 84 LWB NT

Posted: Tue Mar 08, 2011 9:03 am

Thats a bellow, i would recommend putting one on any 4wd.

_________________
Tell my arse, he actually gives a crap!

ZookiMonsta

Joined: Sun Aug 23, 2009 11:30 pm
Posts: 1625
Location: Jimboomba

Posted: Tue Mar 08, 2011 10:09 am

alien wrote:

I started mine up with nothing but extractors... my friends from 4houses down rang up and wanted to know if they could come check out the drag car :lol:

_________________
Own a weird looking coily sh!tbox!

atari4x4

az supporter

Joined: Mon Dec 11, 2006 10:30 pm
Posts: 34842
Location: East Radelayed
Vehicle: SV420+SV620 Vitara's

Posted: Tue Mar 08, 2011 10:20 am

monkey wrote:

stiky wrote:

Bellow???

flex joint.

_________________
You're just hating because you don't understand

Page 1 of 1

[ 18 posts ]

Board index » Talking About Stuff » Suzuki Talk

Who is online

Users browsing this forum: Google Adsense [Bot] and 300 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum