[joel88]

Hi guys

Need to put seat belts in my zook but don't want the standard ones what are they easiest ones that will fit in without to much modifying...

Thanks joel

[Built4thrashing]

what zook? NT or WT sierra, Vit or GV? front or rear?

[joel88]

Lol sorry should have put more info NT sierra lwb in the front but I also have bucket seats

[Built4thrashing]

Do you have removable pannels in the botom of the B pillar to put retractable belts in. If you dont your stuck with what its got.

[steak_knife]

Built4thrashing wrote:

Do you have removable pannels in the botom of the B pillar to put retractable belts in. If you dont your stuck with what its got.

Not 100% true, you can get non gen retractable, but they do take up a bit of room..

In the bush non retracts are better, retractable won't let you move once locked, so looking over your shoulder can be a bitch..

[steak_knife]

steak_knife wrote:

Built4thrashing wrote:

Do you have removable pannels in the botom of the B pillar to put retractable belts in. If you dont your stuck with what its got.

Not 100% true, you can get non gen retractable, but they do take up a bit of room..

In the bush non retracts are better, retractable won't let you move once locked, so looking over your shoulder can be a bitch..

Oh, & they are not cheap.....

[joel88]

So I am better off just putting standard ones back in?

[steak_knife]

joel88 wrote:

So I am better off just putting standard ones back in?

you can get new lap/sash for around $90, the retractable are (from memory) around $350... each...

go have a look under your B pilor, see if there is a plate there with 4 philip's head screw's holding in on, if so easy fit for retractable, if not you'll have to bolt them to the lower point of the std one, when people get in & out they can bump em, making adjustment needed again..
Get's a lil monotonous adjusting them...