[ealfa]

hey guys,

My Vits been leaking oil so the only place left to realy check is my Rear main seal, so obviously i should prob put a HD clutch in . I want to no what type i should put in and also any ones got some tips on how to go about it.

Also where would be the best place to source a clutch and how many $$$$<theses ones

Thanks

[nissvit]

stay with a standard one, the HD's tend to be more problems than they are worth, just ask Royce....

just try to avoid the PBR/ Clutch industry clutches, they have a terrible feel and always seem to be hard to get a nice take up point.

[Fatzook]

nissvit wrote:

stay with a standard one, the HD's tend to be more problems than they are worth, just ask Royce....

just try to avoid the PBR/ Clutch industry clutches, they have a terrible feel and always seem to be hard to get a nice take up point.

X2. STD Exedy are pretty good. PBR's don't seem to last well at all.

[ealfa]

Ok so a standard exceedy is the way to go ?

[buzbox]

I had a heavy duty in mine, and it was fine. It only got replaced because I thought it was buggered, It turned out to be that the clutch cable was fucktus maximus, (probably because of the H/D clutch) A standard one was chucked in to get me by and for the first few weeks It felt like I was going to put my foot through the firewall. The standard clutch seems to be doing ok so far, it's okish for offroad use but personally I prefer the H/D.

[stocker]

I've got a Standard Exeedy in mine and its great.


Do yourself a favour and go get a Genuine Clutch Cable as well. for 76 bucks, it shows a world of difference.

[Westie]

Only replace the Rear Main with the
Genuine Suzuki one P/N SZ-29283-68002 $60-65

CHEAP ONE'S LAST A FEW MONTHS

i use the PBR clutches and have had no problems Touch wood