auszookers.com • View topic - Intake Manifold for 1.3lt and a fan for a 1.3lt

Board index » Shift It And Find It » I Want it I Want it I want it

Intake Manifold for 1.3lt and a fan for a 1.3lt

Page 1 of 1

[ 13 posts ]

Print view

Previous topic | Next topic

Author

Message

tonyevans

az supporter

Joined: Sun Jan 16, 2011 11:18 pm
Posts: 1998
Location: Lightning Ridge NSW
Vehicle: SJ40 - LJ50 - LJ50V - Vitara

Posted: Tue Mar 08, 2011 3:58 am

Hi - I just found out that a Swift starter motor doe's not fit when you mate the G13a motor to a 5 speed box so need to find one that does.

I am in Western NSW so would need post. Cheers - Tony

Last edited by tonyevans on Fri Mar 11, 2011 10:30 pm, edited 4 times in total.

tonyevans

az supporter

Joined: Sun Jan 16, 2011 11:18 pm
Posts: 1998
Location: Lightning Ridge NSW
Vehicle: SJ40 - LJ50 - LJ50V - Vitara

Posted: Wed Mar 09, 2011 3:33 am

I also need a Radiator - Fan - Surround please - Tony

tonyevans

az supporter

Joined: Sun Jan 16, 2011 11:18 pm
Posts: 1998
Location: Lightning Ridge NSW
Vehicle: SJ40 - LJ50 - LJ50V - Vitara

Posted: Fri Mar 11, 2011 1:35 am

OK - Have now got the starter, Radiator and surround on the way but still need the Gear-stick for the 1.3lt 5 speed box and a fan.

Cheers - Tony - out west (a long way)

tonyevans

az supporter

Joined: Sun Jan 16, 2011 11:18 pm
Posts: 1998
Location: Lightning Ridge NSW
Vehicle: SJ40 - LJ50 - LJ50V - Vitara

Posted: Fri Mar 11, 2011 10:29 pm

Now I have found that the Radiator connection on the manifold is on the wrong side (Back instead of front) so now need an intake manifold - Tony

SierraFreek

Joined: Wed Sep 29, 2010 5:12 am
Posts: 221
Location: Beaudesert
Vehicle: Suzuki Sierra

Posted: Thu May 05, 2011 10:46 am

would a manifold from a 88 1.3L engine fit on it?

_________________
SierraFreek!

BlueSuzy

az supporter

Joined: Sun May 04, 2008 11:30 pm
Posts: 9716
Location: NSW
Vehicle: SJ51 LWB, SJ70 SWB

Posted: Thu May 05, 2011 12:49 pm

yes

_________________

BlueSuzy wrote:

I'm over the G16b's.

christover1

az supporter

Joined: Tue Jul 15, 2008 11:30 pm
Posts: 8203
Location: Melbourne
Vehicle: Pajero 91 NH 3.0 SWB

Posted: Thu May 05, 2011 1:19 pm

I have a fan, I believe is 1.3, tho a 1.0 litre fans fit, too.
I don't have mounting bolts or the aluminium boss/spacer thing.
It looks rough, let me know if you want it.
I busy till next week, then can post it if you like.
Swift engines often use a thermo fan,
the water pump pulley sometimes don't fit a Sierra fan.
I used an adaptor on my swift donk, to fit a Sierra fan,
but that got sold yonks ago.
christover

_________________
VIC ZOOK CLUB
http://www.vic.suzuki4wd.com/forum/

BlueSuzy

az supporter

Joined: Sun May 04, 2008 11:30 pm
Posts: 9716
Location: NSW
Vehicle: SJ51 LWB, SJ70 SWB

Posted: Fri May 06, 2011 3:24 am

1L Fan ^

1.3 Fan v

_________________

BlueSuzy wrote:

I'm over the G16b's.

christover1

az supporter

Joined: Tue Jul 15, 2008 11:30 pm
Posts: 8203
Location: Melbourne
Vehicle: Pajero 91 NH 3.0 SWB

Posted: Fri May 06, 2011 3:52 am

I remember now,
I switched to 1.0 fans because all my 1.3 fans kept breaking.
Not sure if there was a reason.
My 1.3 always ran cool enough with either type.

_________________
VIC ZOOK CLUB
http://www.vic.suzuki4wd.com/forum/

SuziBlu

Joined: Mon Sep 14, 2009 11:30 pm
Posts: 4268
Location: Eyre Peninsula

Posted: Sat May 07, 2011 2:04 am

Tony,
I have a spare inlet manifold, but as we discussed a while back, I have opened it up substantially, where the carby bolts on as stock, the throat openings have a combined flow area of 1231mm2, where mine has around 2000mm2

Now stock fans, but a nice selection of thermos.

_________________
Bad decisions make good stories.

tonyevans

az supporter

Joined: Sun Jan 16, 2011 11:18 pm
Posts: 1998
Location: Lightning Ridge NSW
Vehicle: SJ40 - LJ50 - LJ50V - Vitara

Posted: Sat May 07, 2011 3:50 am

SuziBlu wrote:

I have just got hold of a manifold but has a bolt snapped of in one of the thermostat housing holes and someone has butchered it a bit so I don't know if I will be able to get it out. I will try over the weekend.

Now I have never used thermo fans at all so tell me about them and don't you need some sort of controller set-up with them?

Tony
PS - Mums Opal left today :lol:

Hope she likes it

_________________
Old farts sometimes know some stuff you don't.

SuziBlu

Joined: Mon Sep 14, 2009 11:30 pm
Posts: 4268
Location: Eyre Peninsula

Posted: Sat May 07, 2011 4:08 am

_________________
Bad decisions make good stories.

want33s

az supporter

Joined: Fri Nov 16, 2007 10:30 pm
Posts: 8134
Location: Sunshine Coast Qld

Posted: Sat May 07, 2011 7:54 am

Tony I have a 1.3 manifold you can have for free. A fan you can have with spacer for $15 and $20 post.
NB: Sierra fan won't fit Swift/Barina water pump.

Page 1 of 1

[ 13 posts ]

Board index » Shift It And Find It » I Want it I Want it I want it

Who is online

Users browsing this forum: No registered users and 13 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum