| Author |
Message |
bazook

az supporter
Joined: Sat Jul 12, 2008 11:30 pm Posts: 1082 Location: brisbane logan
|
 Posted: Sat Aug 30, 2008 12:36 am |
|
|
ive just bought 6.5.1 transfer gears and i have 32 x 12 x 15 tires and all this is in a wt so ive got 3.7 diff gears
now problem i have is i wondering if i put in nt diff gears in will this bring my revs down a bit cause on the higway at 110 revs are at 3,700rpm
|
|
|
|
 |
royce

omnipotent being
Joined: Sun Jun 11, 2006 11:30 pm Posts: 17216 Location: Pluto
|
 Posted: Sat Aug 30, 2008 12:42 am |
|
|
no it will rev more, 3700 is a pretty sweet spot for a sierra anyway
|
|
|
|
 |
steve

I live here!
Joined: Sun Jun 11, 2006 11:30 pm Posts: 7681 Location: Brisbane
Vehicle: 75 Cruiser
|
 Posted: Sat Aug 30, 2008 12:49 am |
|
110 KPH in a Sierra!!??
i'd be more worried about keeping it in one lane rather the revs 
|
|
|
|
 |
joeblow
Joined: Sat May 10, 2008 11:30 pm Posts: 3273 Location: melbourne
|
 Posted: Sat Aug 30, 2008 1:58 am |
|
|
anywhere between 3600 and 4000 rpm is fine.
_________________ builder of custom road legal zooks......and stuff.
|
|
|
|
 |
lump_a_charcoal

az supporter
Joined: Wed Feb 28, 2007 10:30 pm Posts: 4454 Location: Botany, NSW
Vehicle: MY2019 Jimny
|
 Posted: Sat Aug 30, 2008 2:21 am |
|
|
Anywhere between the gutter and median is also fine...
Last edited by lump_a_charcoal on Sat Aug 30, 2008 2:42 am, edited 1 time in total.
|
|
|
|
 |
just_cruizin

az supporter
Joined: Sun Jun 25, 2006 11:30 pm Posts: 2867 Location: here
|
 Posted: Sat Aug 30, 2008 2:36 am |
|
|
That's why I tell people Sierra are that small, they need to be to keep them in one lane
_________________ greenzook89 wrote: 31zook wrote: Makes me want something similar
|
|
|
|
 |
BlueSuzy

az supporter
Joined: Sun May 04, 2008 11:30 pm Posts: 9716 Location: NSW
Vehicle: SJ51 LWB, SJ70 SWB
|
 Posted: Sat Aug 30, 2008 2:45 am |
|
|
wtf are u guys on about, the rough roads mine doesnt follow much more then my civic on 18"s..
My 1.6, 6.5.1, 33'x12.5 @ 130km cruise wit 1 finger comfortable smooth roads....No p/steer..want more go? Still enough revs to drop into 4th....
_________________ BlueSuzy wrote: I'm over the G16b's.
|
|
|
|
 |
Mike

lesspostingmorewheeling
Joined: Tue May 06, 2008 11:30 pm Posts: 2236 Location: Under Down Under
|
 Posted: Sat Aug 30, 2008 2:48 am |
|
|
i've seen a 1.3 sierra with 31s and standard gearing do 120
|
|
|
|
 |
BlueSuzy

az supporter
Joined: Sun May 04, 2008 11:30 pm Posts: 9716 Location: NSW
Vehicle: SJ51 LWB, SJ70 SWB
|
 Posted: Sat Aug 30, 2008 2:51 am |
|
Mate has been booked stocker at 138Km hr....Downhill prob with a tailwind 
_________________ BlueSuzy wrote: I'm over the G16b's.
|
|
|
|
 |
Mike

lesspostingmorewheeling
Joined: Tue May 06, 2008 11:30 pm Posts: 2236 Location: Under Down Under
|
 Posted: Sat Aug 30, 2008 3:04 am |
|
BlueSuzy wrote: Mate has been booked stocker at 138Km hr....Downhill prob with a tailwind 
slip streaming helps too 
|
|
|
|
 |
hooki

az supporter
Joined: Mon Jul 21, 2008 11:30 pm Posts: 1785 Location: perth, WA
Vehicle: 85' LWB Sierra, 01' S15
|
 Posted: Sat Aug 30, 2008 8:38 am |
|
|
complete stock coil sprung zook at 150kph was the fastest i could get it...lol. in a safe and legal environment of corse.
_________________ 79' LJ80 (sold) :( 95' & 97' sierra (sold)
|
|
|
|
 |
royce

omnipotent being
Joined: Sun Jun 11, 2006 11:30 pm Posts: 17216 Location: Pluto
|
 Posted: Sat Aug 30, 2008 10:31 am |
|
140 in a 1 litre 4 speed with 31's and stock gearing 
|
|
|
|
 |
bazook

az supporter
Joined: Sat Jul 12, 2008 11:30 pm Posts: 1082 Location: brisbane logan
|
 Posted: Sat Aug 30, 2008 12:08 pm |
|
|
170km in safe conditions (on dyno)thats with stock tires without geared transfer case and with a 120hp gti turbo in front
thanks guys for the info
|
|
|
|
 |
Damo

az supporter
Joined: Sat Jul 22, 2006 11:30 pm Posts: 4661 Location: Brisbane
|
 Posted: Sat Aug 30, 2008 1:54 pm |
|
bazook wrote: 170km in safe conditions (on dyno)thats with stock tires without geared transfer case and with a 120hp gti turbo in front
thanks guys for the info
I doubt it would ever be able to do that on the road. 170kph and the bricklike profile of the Sierra body causes a lot of deag.
_________________ SJ50.4.LYF
|
|
|
|
 |
norm
Joined: Mon Apr 07, 2008 11:30 pm Posts: 183
|
 Posted: Sat Aug 30, 2008 2:24 pm |
|
|
aww the momries of going fast in a zook.
when i first got her, used to get 130 to 140km/h on the clock easy.
thats rollen on 35s, so its out about 25kms..
now with this stock vit motor only gets up about 90 max on the clock..
5th gear on 2700rpm
_________________ spoa, lux diffs, 2inch suspension, 2inch body, 1.6
|
|
|
|
 |
Hybrid

az supporter
Joined: Mon Apr 21, 2008 11:30 pm Posts: 1095 Location: Bulimba, Brisbane
Vehicle: '92 Sierra
|
 Posted: Sat Aug 30, 2008 4:33 pm |
|
|
I'm with Bluesuzy here. I used to do 100km a day on the M1 at 110-120kmh. When I first got it it wandered a bit but mainy due to the wind. I put in some caster wedges and the 15000kms since she drives straight as an arrow. the wind blows the body around on the swprings but it still tracks straight.
With my 30s and transfer gearing 100-120kmh = 3500 - 4000rpm. Wouldn't mind dropping them a little though as 3500 is where it starts making a hell of a racket. I'm hoping the bigger tryres brings it down to the 3200-3300 mark.
|
|
|
|
 |
lump_a_charcoal

az supporter
Joined: Wed Feb 28, 2007 10:30 pm Posts: 4454 Location: Botany, NSW
Vehicle: MY2019 Jimny
|
 Posted: Sat Aug 30, 2008 4:47 pm |
|
|
caster is front to back right?
|
|
|
|
 |
Damo

az supporter
Joined: Sat Jul 22, 2006 11:30 pm Posts: 4661 Location: Brisbane
|
 Posted: Sat Aug 30, 2008 5:17 pm |
|
Hybrid wrote: I'm with Bluesuzy here. I used to do 100km a day on the M1 at 110-120kmh. When I first got it it wandered a bit but mainy due to the wind. I put in some caster wedges and the 15000kms since she drives straight as an arrow. the wind blows the body around on the swprings but it still tracks straight.
With my 30s and transfer gearing 100-120kmh = 3500 - 4000rpm. Wouldn't mind dropping them a little though as 3500 is where it starts making a hell of a racket. I'm hoping the bigger tryres brings it down to the 3200-3300 mark.
Unfortunately the torque peak is closer to the 4000rpm mark, but with the 1600 you should be OK.
_________________ SJ50.4.LYF
|
|
|
|
 |
Damo

az supporter
Joined: Sat Jul 22, 2006 11:30 pm Posts: 4661 Location: Brisbane
|
 Posted: Sat Aug 30, 2008 5:29 pm |
|
lump_a_charcoal wrote: caster is front to back right?
Yep
_________________ SJ50.4.LYF
|
|
|
|
 |
Hybrid

az supporter
Joined: Mon Apr 21, 2008 11:30 pm Posts: 1095 Location: Bulimba, Brisbane
Vehicle: '92 Sierra
|
 Posted: Sat Aug 30, 2008 5:42 pm |
|
lump_a_charcoal wrote: caster is front to back right?
Yeah front to back. Technically my steering plain is higher at the front and lower at the back than stock. I got hilux wedges from snake racing and cut them down but I found superior engineering ahd them ready made for the zuk when I put them in my GF's sierra.
|
|
|
|
 |
joeblow
Joined: Sat May 10, 2008 11:30 pm Posts: 3273 Location: melbourne
|
 Posted: Sat Aug 30, 2008 7:17 pm |
|
norm wrote: aww the momries of going fast in a zook. when i first got her, used to get 130 to 140km/h on the clock easy. thats rollen on 35s, so its out about 25kms..
now with this stock vit motor only gets up about 90 max on the clock.. 5th gear on 2700rpm
 ...5th gear 2700...90k's....definately not geared correctly. must go through the juice too...
_________________ builder of custom road legal zooks......and stuff.
|
|
|
|
 |
bazook

az supporter
Joined: Sat Jul 12, 2008 11:30 pm Posts: 1082 Location: brisbane logan
|
 Posted: Sat Aug 30, 2008 7:53 pm |
|
|
what about putting 5.12 gears in the diffs
|
|
|
|
 |
norm
Joined: Mon Apr 07, 2008 11:30 pm Posts: 183
|
 Posted: Sat Aug 30, 2008 11:07 pm |
|
joeblow wrote: norm wrote: aww the momries of going fast in a zook. when i first got her, used to get 130 to 140km/h on the clock easy. thats rollen on 35s, so its out about 25kms..
now with this stock vit motor only gets up about 90 max on the clock.. 5th gear on 2700rpm  ...5th gear 2700...90k's....definately not geared correctly. must go through the juice too...
yhe man she eats it prity hard hey,, its farrkked
no gearing ATM, just the 4.88s diffs and vit box/Tcase..
soon to get the gearing
_________________ spoa, lux diffs, 2inch suspension, 2inch body, 1.6
|
|
|
|
 |
BlueSuzy

az supporter
Joined: Sun May 04, 2008 11:30 pm Posts: 9716 Location: NSW
Vehicle: SJ51 LWB, SJ70 SWB
|
 Posted: Sun Aug 31, 2008 12:18 am |
|
When the caster is out yes it will want to steer all over the place...Mine is sorted i think..
Oh and wind is definately a different story
But a low brick with heavy wide tyres help..More then a 5"lift on stockers!
_________________ BlueSuzy wrote: I'm over the G16b's.
|
|
|
|
 |
Rockhopper
Joined: Sun Jun 22, 2008 11:30 pm Posts: 1265 Location: Chipping Norton
|
 Posted: Sun Aug 31, 2008 2:07 pm |
|
royce wrote: 140 in a 1 litre 4 speed with 31's and stock gearing 
What?!?! Where!?!? Off a cliff??? 
|
|
|
|
 |
royce

omnipotent being
Joined: Sun Jun 11, 2006 11:30 pm Posts: 17216 Location: Pluto
|
 Posted: Sun Aug 31, 2008 3:01 pm |
|
nope flat no wind highway
actually it used to cruise on 110 loaded with camping gear too, got bang on 10l 100km as well
it was a freak, you can imagine my disappointment when I 'upgraded' to a slower 1.3 
|
|
|
|
 |
Rockhopper
Joined: Sun Jun 22, 2008 11:30 pm Posts: 1265 Location: Chipping Norton
|
 Posted: Mon Sep 01, 2008 11:01 am |
|
|
I only ever drove my standard 1.3 to 110km/h. Anything after that would require the use of earplugs to drown out the noise of the screaming motor. Now with 31's on it, it'll still do 110 in 4th, but it takes a while to get there.
_________________ We're riding in the Ninky Nonk!
|
|
|
|
 |
|