auszookers.com • View topic - Got a prob with sierra

Board index » Talking About Stuff » Suzuki Talk

Got a prob with sierra

Page 1 of 1

[ 14 posts ]

Print view

Previous topic | Next topic

Author

Message

607CHA

az supporter

Joined: Thu Apr 07, 2011 8:21 pm
Posts: 265
Location: Baldhills
Vehicle: 02 jimny

Posted: Sun May 08, 2011 8:47 am

When driving my Sierra today it developed a prob that comes and goes. Sometimes when when I pit the clutch in the whole car vibrates and continues after the clutch is out and vibrates when I accelerate. This prob comes and goes. Please all help welcome. Cause if not sorted I'm going to a pootrol.

S13RR4

Joined: Sat Aug 22, 2009 11:30 pm
Posts: 1072
Location: Sunshine Coast

Posted: Sun May 08, 2011 8:50 am

sounds like uni joints to me, I had same problem

Jump under the car and see how much play is in them, should be no more than half a mm

_________________
My Rig --> Click WWW

607CHA

az supporter

Joined: Thu Apr 07, 2011 8:21 pm
Posts: 265
Location: Baldhills
Vehicle: 02 jimny

Posted: Sun May 08, 2011 8:53 am

Shouldn't the vibration be there all the time?

_________________
LIVING LIFE ON THE EDGE, TILL YA ROLL

steak_knife

az supporter

Joined: Fri May 22, 2009 11:30 pm
Posts: 21335
Location: Smart Ass Island

Posted: Sun May 08, 2011 8:55 am

Seized uni, eng mount/mount's, transfer mount's, loose g/box bolt's ect ect ect

_________________
I used to be indecisive,
now I'm not so sure.....

whincup

az supporter

Joined: Sat Apr 17, 2010 11:30 pm
Posts: 1588
Location: Gracemere, QLD
Vehicle: '94 suzuki maruti

Posted: Sun May 08, 2011 8:58 am

S13RR4 wrote:

sounds like uni joints to me, I had same problem

Jump under the car and see how much play is in them, should be no more than half a mm

X2. same issue i had before i replaced my uni...

S13RR4

Joined: Sat Aug 22, 2009 11:30 pm
Posts: 1072
Location: Sunshine Coast

Posted: Sun May 08, 2011 9:01 am

607CHA wrote:

Shouldn't the vibration be there all the time?

no because sometimes the uni/drive shaft runs in line so to speak but once you change the load on it because there is play in the uni it becomes out of balance.

That's how I reasoned it anyway

_________________
My Rig --> Click WWW

607CHA

az supporter

Joined: Thu Apr 07, 2011 8:21 pm
Posts: 265
Location: Baldhills
Vehicle: 02 jimny

Posted: Sun May 08, 2011 9:16 am

thanks for all the help. ill jump under and look tomorrow and let you know.

_________________
LIVING LIFE ON THE EDGE, TILL YA ROLL

607CHA

az supporter

Joined: Thu Apr 07, 2011 8:21 pm
Posts: 265
Location: Baldhills
Vehicle: 02 jimny

Posted: Sun May 08, 2011 9:31 am

Just another quick question. Should the front drive shaft turn while on 2wd when moving is this the wind turning it.

_________________
LIVING LIFE ON THE EDGE, TILL YA ROLL

steak_knife

az supporter

Joined: Fri May 22, 2009 11:30 pm
Posts: 21335
Location: Smart Ass Island

Posted: Sun May 08, 2011 9:53 am

607CHA wrote:

Just another quick question. Should the front drive shaft turn while on 2wd when moving is this the wind turning it.

No & no....

_________________
I used to be indecisive,
now I'm not so sure.....

coily96

az supporter

Joined: Wed May 05, 2010 11:50 am
Posts: 823
Location: Beenleigh
Vehicle: Coil Sierra

Posted: Sun May 08, 2011 10:34 am

front hubs still locked in?

607CHA

az supporter

Joined: Thu Apr 07, 2011 8:21 pm
Posts: 265
Location: Baldhills
Vehicle: 02 jimny

Posted: Sun May 08, 2011 11:24 am

No but right one is pretty dodge

_________________
LIVING LIFE ON THE EDGE, TILL YA ROLL

SSSIERA

Joined: Tue Mar 22, 2011 1:26 pm
Posts: 1770
Location: Perth's RUF

Posted: Sun May 08, 2011 2:14 pm

jump under and see if u can spin the front dive shaft by hand.

_________________
THINKING BEFORE POSTING!!!

Scrawny

I live here!

Joined: Tue Jan 29, 2008 10:30 pm
Posts: 10528
Location: Brissie
Vehicle: Popemobile

Posted: Sun May 08, 2011 7:08 pm

In 2wd, with the hubs set to free, the front shaft should spin freely. If it doesn't then one or both of the hubs are holding on.

607CHA

az supporter

Joined: Thu Apr 07, 2011 8:21 pm
Posts: 265
Location: Baldhills
Vehicle: 02 jimny

Posted: Sun May 08, 2011 7:13 pm

It spins freely.

_________________
LIVING LIFE ON THE EDGE, TILL YA ROLL

Page 1 of 1

[ 14 posts ]

Board index » Talking About Stuff » Suzuki Talk

Who is online

Users browsing this forum: No registered users and 59 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum