| Author |
Message |
matt.scorgie
Joined: Tue Apr 12, 2011 10:23 am Posts: 138 Location: wamuran
|
 Posted: Mon May 09, 2011 1:59 am |
|
|
i think 33 are too big what other than that what soze and what type of tyre i8s the best i got told 33 silverstones cause the 33 is actually a 32 or somethink just want to clarify thx
|
|
|
|
 |
SierraDan

az supporter
Joined: Fri Feb 04, 2011 10:55 pm Posts: 9348 Location: Newcastle
Vehicle: G13BB Jimny
|
 Posted: Mon May 09, 2011 2:05 am |
|
|
33s should be sweet. What sort of driving do you do?
Mud? Rock? Sand?
_________________ mlm
|
|
|
|
 |
mnemonix

az supporter
Joined: Sun Aug 16, 2009 11:30 pm Posts: 1409 Location: Newcastle NSW
Vehicle: '96 LWB trayback
|
 Posted: Mon May 09, 2011 2:06 am |
|
|
How have you achieved your 6" of lift?
33 inch silvestones are a great tyre, but anything that size is woeful to drive if you don't do some gearing reduction to to with itl.
_________________ Twin charged twin cam twin locked webwheeler
|
|
|
|
 |
Goldy
Joined: Wed Apr 13, 2011 12:12 pm Posts: 67 Location: Mindarie, Perth
|
 Posted: Mon May 09, 2011 2:14 am |
|
|
I'm running 33's on a 5 inch lift, by 2" extended shackles and 3" lifted springs.
Unless I do a RUF, move my diffs forward/backward and hammer in my firewall I'm going to have to do some cutting.
I'm going with the cutting at this stage + extended bump stops to try a different end result to others
The other thing you have to watch with 33's is they're not to wide, I've got 33x12.5s which rub on my springs on full lock (in a W/T model). 1 to 2 inch wheel spacers could 'maybe' fix this
Like the above posts though, depends how you achieved the 6" and dont expect to be able to 4wd with 33's until u get reduction gears
|
|
|
|
 |
SierraDan

az supporter
Joined: Fri Feb 04, 2011 10:55 pm Posts: 9348 Location: Newcastle
Vehicle: G13BB Jimny
|
 Posted: Mon May 09, 2011 2:16 am |
|
|
Yeah, sorry cutting will be a given.
_________________ mlm
|
|
|
|
 |
matt.scorgie
Joined: Tue Apr 12, 2011 10:23 am Posts: 138 Location: wamuran
|
 Posted: Mon May 09, 2011 2:37 am |
|
|
yeah more glasshouse so i guess mud and rock i have 2 inch body 2 inch spring and 2 inch extended shackles ute conversion wt if that heps at all maybe suggest a 32 super swamper or somethink maybe i dont no i dont want to have to do mega cutting and shit and i wont do gearing for a fair while so maybe even 31 silverstones ??
|
|
|
|
 |
matt.scorgie
Joined: Tue Apr 12, 2011 10:23 am Posts: 138 Location: wamuran
|
 Posted: Mon May 09, 2011 3:02 am |
|
|
oh and where can i buy silverstone extremes from anyway??
|
|
|
|
 |
gypsy

az supporter
Joined: Mon Oct 27, 2008 10:30 pm Posts: 1027 Location: north brisbane
Vehicle: lj81 stockman
|
 Posted: Mon May 09, 2011 3:04 am |
|
|
is this dark grey with a cage and winch
_________________ the wobble rocks
|
|
|
|
 |
matt.scorgie
Joined: Tue Apr 12, 2011 10:23 am Posts: 138 Location: wamuran
|
 Posted: Mon May 09, 2011 3:07 am |
|
|
naaa mate blue withy wince no internal cage just tray and profesionaly choped good deal for 2k also has rear locker and lift led lights and racing seats only thing i need is a carby was going untill i stuffed carby lol
|
|
|
|
 |
JrZook
Joined: Tue Aug 08, 2006 11:30 pm Posts: 5517 Location: Holland Park
Vehicle: Awesome!!
|
 Posted: Mon May 09, 2011 3:11 am |
|
|
Mmmmmmm glasshouse+31's-33's on stock gearing = replacement clutches and minimal vehicle control resulting in possible rolling if you do any descent tracks bar flat fire trails and lil mud puddles....
_________________ Lil Foot!
http://tiny.cc/gtsw1
|
|
|
|
 |
Ben_Sierra

az supporter
Joined: Wed Sep 30, 2009 11:30 pm Posts: 4472 Location: Perth
|
 Posted: Mon May 09, 2011 3:13 am |
|
matt.scorgie wrote: yeah more glasshouse so i guess mud and rock i have 2 inch body 2 inch spring and 2 inch extended shackles ute conversion wt if that heps at all maybe suggest a 32 super swamper or somethink maybe i dont no i dont want to have to do mega cutting and shit and i wont do gearing for a fair while so maybe even 31 silverstones ??
31s on stock gearing will be a dog to drive, bigger will be worse...
If you wanna go big tyres you gotta fix the gearing. Otherwise there is just no point. Do it properly, or don't bother, you'll make it worse, not better...
_________________ I want my old sig back 
|
|
|
|
 |
matt.scorgie
Joined: Tue Apr 12, 2011 10:23 am Posts: 138 Location: wamuran
|
 Posted: Mon May 09, 2011 3:16 am |
|
|
ok i am new to suzukis thats all so i guess transfer reduction will be the first thing then tyres how much is transfer gearing and what ones do you guys suggest what ratsio
|
|
|
|
 |
matt.scorgie
Joined: Tue Apr 12, 2011 10:23 am Posts: 138 Location: wamuran
|
 Posted: Mon May 09, 2011 3:26 am |
|
|
wheres a good place to get them and how much am i expected to pay
|
|
|
|
 |
Ben_Sierra

az supporter
Joined: Wed Sep 30, 2009 11:30 pm Posts: 4472 Location: Perth
|
 Posted: Mon May 09, 2011 3:26 am |
|
|
Transfer gears are probably 500-700 dpending on ratios from somewhere like lowrange but I haven't checked lately. Either 4.9:1 or 6.5:1 for 31s, definitely 6.5:1 if you want to go bigger.
_________________ I want my old sig back 
|
|
|
|
 |
gypsy

az supporter
Joined: Mon Oct 27, 2008 10:30 pm Posts: 1027 Location: north brisbane
Vehicle: lj81 stockman
|
 Posted: Mon May 09, 2011 3:27 am |
|
|
my sierra on 31 stock gears went fine
_________________ the wobble rocks
|
|
|
|
 |
matt.scorgie
Joined: Tue Apr 12, 2011 10:23 am Posts: 138 Location: wamuran
|
 Posted: Mon May 09, 2011 3:45 am |
|
|
ok well im gonna go a 31 silverstone extreme and if i have problems ill get better ratsio diffs would that be better and if thats not good then rock crawler gears 4.9 1 cause i got told 6:5:1 goes way to slow if ya havet got a decent engin i only have a 1.3l if i went 6:5:1 i may need a 1.6l to spin tyres better i dont no off my head just what i have herd
|
|
|
|
 |
mnemonix

az supporter
Joined: Sun Aug 16, 2009 11:30 pm Posts: 1409 Location: Newcastle NSW
Vehicle: '96 LWB trayback
|
 Posted: Mon May 09, 2011 3:47 am |
|
|
Thats backwards mate.
The 6.5:1 gearing makes it easier for an inferior engine to turn the tyres.
In effect, you get more torque to the wheels.
31's are still large enough to require gearing. Even 29's are pushing it.
_________________ Twin charged twin cam twin locked webwheeler
|
|
|
|
 |
matt.scorgie
Joined: Tue Apr 12, 2011 10:23 am Posts: 138 Location: wamuran
|
 Posted: Mon May 09, 2011 4:08 am |
|
|
well these seem reletivly cheap are they easy or real hard to install or can you get someone to install for you if so how much oh and is it ok to have 6:5:1 with 31 inch tyres sorry for all the questions just dont want to get it wrong oh and thanks everyone for your help.
|
|
|
|
 |
matt.scorgie
Joined: Tue Apr 12, 2011 10:23 am Posts: 138 Location: wamuran
|
 Posted: Mon May 09, 2011 4:09 am |
|
|
|
 |
matt.scorgie
Joined: Tue Apr 12, 2011 10:23 am Posts: 138 Location: wamuran
|
 Posted: Mon May 09, 2011 4:10 am |
|
|
oh last question is a samurai the same as a sierra >>?? may sound silly but just wondering so i dont buy ones that do not fit
|
|
|
|
 |
JrZook
Joined: Tue Aug 08, 2006 11:30 pm Posts: 5517 Location: Holland Park
Vehicle: Awesome!!
|
 Posted: Mon May 09, 2011 4:13 am |
|
matt.scorgie wrote: oh last question is a samurai the same as a sierra >>?? may sound silly but just wondering so i dont buy ones that do not fit
Yes same car. Can I ask how much wheeling experience you actually have in this vehicle before you go diving into all these mods with a fist full of cash?
Whats the need for 31-33' tires?
_________________ Lil Foot!
http://tiny.cc/gtsw1
|
|
|
|
 |
SierraDan

az supporter
Joined: Fri Feb 04, 2011 10:55 pm Posts: 9348 Location: Newcastle
Vehicle: G13BB Jimny
|
 Posted: Mon May 09, 2011 4:13 am |
|
|
Same car different name in the US.
also, you have 5" of lift. 2" extended shackles only equal 1" lift. I'd remove them, and run 31's. RUF the front and get 6.5 transfer gears if you're keeping the 1.3 carb and doing lots of Rock and stuff.
_________________ mlm
|
|
|
|
 |
matt.scorgie
Joined: Tue Apr 12, 2011 10:23 am Posts: 138 Location: wamuran
|
 Posted: Mon May 09, 2011 4:16 am |
|
|
i use to drive a gq compititsion car sold it bought a skyline missed 4wdriving so i got a zook never went weeling yet but i herd there a perfect lil car for 2 people to have some fun in want it pretty much readdy before i go out breaking stuff and i have done serious 4wdriving before i dont want to have to start doing the easyest tracks and not have any fun at all yeah ill get use to it before i go hard but easy is just boring
|
|
|
|
 |
matt.scorgie
Joined: Tue Apr 12, 2011 10:23 am Posts: 138 Location: wamuran
|
 Posted: Mon May 09, 2011 4:18 am |
|
|
ruf how is it a huge advantage brings the diff forward 1 inch give a bit more travel im not saying its shit im saying it looks kinda hard lol but i guess i can do it do ya need extended shackles with ruf or standard.
|
|
|
|
 |
matt.scorgie
Joined: Tue Apr 12, 2011 10:23 am Posts: 138 Location: wamuran
|
 Posted: Mon May 09, 2011 4:18 am |
|
|
|
 |
SierraDan

az supporter
Joined: Fri Feb 04, 2011 10:55 pm Posts: 9348 Location: Newcastle
Vehicle: G13BB Jimny
|
 Posted: Mon May 09, 2011 4:24 am |
|
|
Massively greater wheel travel, smoother ride.
Im no fabricator but I'm going to have a go, and feel confident so can't be too bad!
If you do a proper chassis extension you maintain standard shackles.
_________________ mlm
|
|
|
|
 |
matt.scorgie
Joined: Tue Apr 12, 2011 10:23 am Posts: 138 Location: wamuran
|
 Posted: Mon May 09, 2011 4:36 am |
|
|
i alreddy have 2 inch lifted shocks and i have 2 inch lifted patrol shocks is it a bad idea putting gq patrol shocks in a sierra cause they fit and alland 2 inch gq is a 4 to 5 inch lift in a sierra right >??
|
|
|
|
 |
SuziBlu
Joined: Mon Sep 14, 2009 11:30 pm Posts: 4268 Location: Eyre Peninsula
|
 Posted: Mon May 09, 2011 4:42 am |
|
matt.scorgie wrote: ruf how is it a huge advantage brings the diff forward 1 inch give a bit more travel im not saying its shit im saying it looks kinda hard lol but i guess i can do it do ya need extended shackles with ruf or standard.
I don't think you understand what RUF is, sorry if you do.
RUF, Rear Up Front. The stock suzi front springs are quite short, the rears are longer, and a very popular mod is to get a set of rear springs, and move them up front, throw away the stock shorties.
This will give u a few things, softer ride, more wheel travel/articulation, and by moving the front diff forward it will allow bigger tyres without having to beat in the firewall zone so as to turn the bugger.
_________________ Bad decisions make good stories.
|
|
|
|
 |
SierraDan

az supporter
Joined: Fri Feb 04, 2011 10:55 pm Posts: 9348 Location: Newcastle
Vehicle: G13BB Jimny
|
 Posted: Mon May 09, 2011 4:50 am |
|
matt.scorgie wrote: i alreddy have 2 inch lifted shocks and i have 2 inch lifted patrol shocks is it a bad idea putting gq patrol shocks in a sierra cause they fit and alland 2 inch gq is a 4 to 5 inch lift in a sierra right >??
Two inch is two inch.
The gq shocks are valves for a heavy 4wd so on your light Sierra will have a dreadful ride. You may also find the larger bore shocks will foul on things during full articulation MAYBE
_________________ mlm
|
|
|
|
 |
matt.scorgie
Joined: Tue Apr 12, 2011 10:23 am Posts: 138 Location: wamuran
|
 Posted: Mon May 09, 2011 5:04 am |
|
|
oh ruf i diddent really understand it but when i do ruf is it like putting a 2 inch spring lift in the front and how many leafs should i have in it do ya think its aa ideal thing to do when ya have brand new 2 inch lift king springs in front and rear lol
|
|
|
|
 |
|