auszookers.com • View topic - WTwrecking. 1.6spi. extractors

Board index » Shift It And Find It » Getting rid of stuff

WTwrecking. 1.6spi. extractors

Page 1 of 2

[ 39 posts ]

Go to page 1, 2 Next

Print view

Previous topic | Next topic

Author

Message

canberramav

Joined: Mon Jun 01, 2009 11:30 pm
Posts: 643
Location: Canberra

Posted: Wed May 04, 2011 8:55 am

Hey guys

I have a WT that im parting.

At this stage im only after swaps for parts. The parts im after are transfer reduction gears and some 31 inch tyres and rims for Sierra. (prefer mud tyres but streetable type not swampers or anything like that)

The parts available are:

Front and rear diffs. Complete and in good condition.

All steering components, box, arms, shaft etc

Complete Motor and 5 speed. Both in good running order. Motor is bit oily around sump gasket otherwise seems really good.

WT bonnet. Lighty dented along top.

Windscreen and surround. Good condition

Chassis

Standard springs and shocks

Driveshafts

Dash and other misc parts.

PM me if you are intersted in anything.

Cheers

Last edited by canberramav on Wed May 18, 2011 7:53 am, edited 2 times in total.

chef

Joined: Fri Oct 24, 2008 10:30 pm
Posts: 272
Location: canberra

Posted: Wed May 04, 2011 9:02 am

So the doors are out of the question??

jimbo_jones

az supporter

Joined: Sat Jul 19, 2008 11:30 pm
Posts: 4361
Location: gong
Vehicle: 2015 Jimny, LJ50, Maruti

Posted: Wed May 04, 2011 9:09 am

how much for the complete diffs?

_________________
www.illawarrasuzuki4wdclub.webs.com

canberramav

Joined: Mon Jun 01, 2009 11:30 pm
Posts: 643
Location: Canberra

Posted: Wed May 04, 2011 9:17 am

Chef - Doors are stuffed. Well the drivers door aint to bad but its not good either. Passenger door is stuffed.

Jimbo im open to offers i guess if you want to shoot me a PM.

I posted the items as prefer swaps for parts at this stage to hopefully save me some time hunting etc.

jimbo_jones

az supporter

Joined: Sat Jul 19, 2008 11:30 pm
Posts: 4361
Location: gong
Vehicle: 2015 Jimny, LJ50, Maruti

Posted: Wed May 04, 2011 9:38 am

Hi mate my mates after the diffs not sure what there worth

Im after the grill and the blanks for the gaurds where the indercators went on the early one

jimbo

_________________
www.illawarrasuzuki4wdclub.webs.com

zookyute1981

Joined: Sat Jun 27, 2009 11:30 pm
Posts: 314
Location: mount barker (GSWA)

Posted: Wed May 04, 2011 11:27 am

any 1.3 extractors?

canberramav

Joined: Mon Jun 01, 2009 11:30 pm
Posts: 643
Location: Canberra

Posted: Wed May 04, 2011 8:03 pm

No extractors. Motor is competely standard.

stockman

az supporter

Joined: Thu Nov 05, 2009 10:30 pm
Posts: 5319
Location: Canberra
Vehicle: 4wd

Posted: Wed May 04, 2011 10:17 pm

Does the motor run well?

_________________
Watch out or you'll get sued.

canberramav

Joined: Mon Jun 01, 2009 11:30 pm
Posts: 643
Location: Canberra

Posted: Thu May 05, 2011 2:23 am

Motor runs well.

Ive taken the radiator out for my dads car but if you have one to put in temporarily then i can start it for you if your interested.

Actually come to think of it i have a 1lt radiator that will do the job. If your interested then pm me and come have a look.

Cheers

zookyute1981

Joined: Sat Jun 27, 2009 11:30 pm
Posts: 314
Location: mount barker (GSWA)

Posted: Thu May 05, 2011 5:58 am

cheers

canberramav

Joined: Mon Jun 01, 2009 11:30 pm
Posts: 643
Location: Canberra

Posted: Thu May 05, 2011 9:39 am

Anyone with 31's or transfer gears interested in any parts?

11_evl

Joined: Tue Apr 10, 2007 11:30 pm
Posts: 846
Location: logan reserve, Brisb

Posted: Thu May 05, 2011 10:16 am

I'll take doors. How much. I need them for my comp truck

_________________
92 sierra, 40" treps, full hydro, F&R steer, 106"W

canberramav

Joined: Mon Jun 01, 2009 11:30 pm
Posts: 643
Location: Canberra

Posted: Thu May 05, 2011 7:56 pm

Doors are stuffed mate.
The bonnet and the bit that goes over your head is prob the only panels worth selling.

607CHA

az supporter

Joined: Thu Apr 07, 2011 8:21 pm
Posts: 265
Location: Baldhills
Vehicle: 02 jimny

Posted: Thu May 05, 2011 9:11 pm

How much you want fir the body I don't want front 1/4 does or anything like that just the base as I'm gonna do a chop.

_________________
LIVING LIFE ON THE EDGE, TILL YA ROLL

canberramav

Joined: Mon Jun 01, 2009 11:30 pm
Posts: 643
Location: Canberra

Posted: Thu May 05, 2011 9:45 pm

Just the body?

There is really not much left that is good.

experament-u2

Joined: Thu Feb 05, 2009 10:30 pm
Posts: 267
Location: Adelaide
Vehicle: 98 Maruti

Posted: Thu May 05, 2011 11:28 pm

how tight is the streering box?

canberramav

Joined: Mon Jun 01, 2009 11:30 pm
Posts: 643
Location: Canberra

Posted: Fri May 06, 2011 9:21 pm

Steering box seems to be good.

Jimbo the grill is in good condition. There is a small crack around where the centre screw goes that would be mostly covered by the screw head when you put it in. Blanks on the side are good.

jonno_racing

az supporter

Joined: Wed Apr 15, 2009 11:30 pm
Posts: 8164
Location: Tassie
Vehicle: suzuki

Posted: Mon May 09, 2011 9:10 am

rear diff? i need housing and axels?

_________________
Do cool stuff, Put it on the internet
Sierra build, Jimny build
https://www.youtube.com/user/redzook1

canberramav

Joined: Mon Jun 01, 2009 11:30 pm
Posts: 643
Location: Canberra

Posted: Mon May 09, 2011 9:41 am

PM'd you johnno.

sogone

az supporter

Joined: Mon Oct 25, 2010 11:29 am
Posts: 2070
Location: Darwin

Posted: Fri May 13, 2011 9:35 am

How much do you want for the front springs? I don't have any parts worth swapping. :/

canberramav

Joined: Mon Jun 01, 2009 11:30 pm
Posts: 643
Location: Canberra

Posted: Fri May 13, 2011 11:03 am

Your in Darwin? Freight would be over $100 alone

sogone

az supporter

Joined: Mon Oct 25, 2010 11:29 am
Posts: 2070
Location: Darwin

Posted: Fri May 13, 2011 11:28 pm

Ya gotta do what you gotta do. It's about $85 for freight.

Shandy

Joined: Tue Apr 26, 2011 3:48 am
Posts: 45
Location: canberra

Posted: Sat May 14, 2011 3:51 am

looking for dizzy and carb. nothing really to swap unfortunatly though.

canberramav

Joined: Mon Jun 01, 2009 11:30 pm
Posts: 643
Location: Canberra

Posted: Sun May 15, 2011 8:10 am

Im happy to freight to darwin if you like. You can have the pair of springs for $25.

They are just standard saggy front springs though.

You organise the freight. Cheers

Im not going to separate parts of the motor. Prefer to sell whole.

canberramav

Joined: Mon Jun 01, 2009 11:30 pm
Posts: 643
Location: Canberra

Posted: Tue May 17, 2011 8:13 am

Ok so swapping for gears and wheels didn't work out very well.

Parts i have left to sell:

Complete front diff. Hub to hub.
Rear diff housing, axles etc. Everything except diff centre.
Front and rear driveshafts
5 speed gearbox
Windscreen surround
Chassis
Standard springs and shocks
Steering box and all steering components
Vitara radiator

Other misc interior parts etc.

Thanks

suzooky87

Posted: Tue May 17, 2011 8:52 am

Still got the transfer?

canberramav

Joined: Mon Jun 01, 2009 11:30 pm
Posts: 643
Location: Canberra

Posted: Tue May 17, 2011 9:15 am

nope
just whats on the list

gdaymatee

Joined: Mon Dec 13, 2010 9:47 pm
Posts: 69
Location: newcastle

Posted: Wed May 18, 2011 3:54 am

Hi mate I want the front diff. What condition is it in? does it have any leaks/ bearing noise etc?

Can you give me a price freighted to newcastle?

Thanks,
Bryan

canberramav

Joined: Mon Jun 01, 2009 11:30 pm
Posts: 643
Location: Canberra

Posted: Wed May 18, 2011 4:03 am

Try E-go for freight.

Your guess is as good as mine for weight. As far as i know the front diff etc is in good condition.

My postcode is 2902.

Cheers

canberramav

Joined: Mon Jun 01, 2009 11:30 pm
Posts: 643
Location: Canberra

Posted: Wed May 18, 2011 7:56 am

Parts i have left to sell:

Complete front diff. Hub to hub.
Rear diff housing, axles etc. Everything except diff centre.
Front and rear driveshafts
5 speed gearbox
Windscreen surround
Chassis
Standard springs and shocks
Steering box and all steering components
Vitara radiator

Other misc interior parts etc.

Also have: 1.6 single point engine/ecu
extractors to suit 1.6.
5 speed Vitara gearbox with modified Vitara transfer to suit twin setup (front output has been removed) Gearbox need a shifter bush.

Motor needs a rebuild but is currently in my zook and running at the moment.

Thanks

Page 1 of 2

[ 39 posts ]

Go to page 1, 2 Next

Board index » Shift It And Find It » Getting rid of stuff

Who is online

Users browsing this forum: No registered users and 1 guest

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum