auszookers.com • View topic - Sierra stuff Vic. Updated list. 24-5-11

Board index » Shift It And Find It » Getting rid of stuff

Sierra stuff Vic. Updated list. 24-5-11

Page 1 of 1

[ 25 posts ]

Print view

Previous topic | Next topic

Author

Message

Built4thrashing

Joined: Wed May 21, 2008 11:30 pm
Posts: 4972
Location: Dandenong .Vic
Vehicle: 1999 GV. Locked and Lifted

Posted: Sun May 15, 2011 4:52 am

doing more cleaning out in the shed and found a few more sierra parts to get rid of.

1. set of 4. 31x10.5 R15 simex MT tyres on 15x8 rims. Tyres are about 20% tread. One tyre had a trail repair done to a side wall using plugs. Could do with a tube. Rims are straight but have some paint flaking off. Plus one 15x8 rim only. $350. ono

2. Rear one piece cloth seat. comes with all belts (had to buy new ones 2 years ago). $75. ono

.

6. Extended shackles. $50.

more stuff.

Sierra fuel tank. $30.
Heater blower $20
Soft top rear support bar. SOLD
Washer bottle.$10
1.3 Dip stick.$5
Gear stick, bent to suit 2in BL $10
New NT uni $20
New WT uni $20
New fanbelt for Ford alt upgrade. $15... ( 3pk850 )
also have a box full of assorted oil seals. $5 each . Pm me what you need and ill see if i have one.

pics below.

_________________
B4T

Built by me to be driven like a rental

Last edited by Built4thrashing on Tue May 24, 2011 10:27 am, edited 4 times in total.

bohuler

az supporter

Joined: Wed Nov 10, 2010 9:18 am
Posts: 1376
Location: Avonsleigh, Victoria

Posted: Sun May 15, 2011 5:21 am

Chuck up a pic of the starter motor gear please

I will take it if its good! (I know how you drive 'em, just wanna check first :lol:

)

_________________
Life's short, fiddle with your willy while you can

zuk_244

Joined: Sun Jun 28, 2009 11:30 pm
Posts: 170
Location: Wangaratta, Vic

Posted: Sun May 15, 2011 7:50 am

Pm sent

Built4thrashing

Joined: Wed May 21, 2008 11:30 pm
Posts: 4972
Location: Dandenong .Vic
Vehicle: 1999 GV. Locked and Lifted

Posted: Sun May 15, 2011 8:17 am

bohuler wrote:

Chuck up a pic of the starter motor gear please

I will take it if its good! (I know how you drive 'em, just wanna check first :lol:

)

Hmm

did you look at the pics i already posted???? do you want a pic with serial numbers on it?

_________________
B4T

Built by me to be driven like a rental

Built4thrashing

Joined: Wed May 21, 2008 11:30 pm
Posts: 4972
Location: Dandenong .Vic
Vehicle: 1999 GV. Locked and Lifted

Posted: Sun May 15, 2011 8:33 am

Just added more stuff. dont have pics of everything yet but i can take some for you on request.

_________________
B4T

Built by me to be driven like a rental

ajsr

az supporter

Joined: Sun Dec 28, 2008 10:30 pm
Posts: 3712
Location: melb

Posted: Sun May 15, 2011 8:39 am

softtop support bar is mine

but you will have to hold it for me for a week or so jas, unitl i can get over to grab it.

Built4thrashing

Joined: Wed May 21, 2008 11:30 pm
Posts: 4972
Location: Dandenong .Vic
Vehicle: 1999 GV. Locked and Lifted

Posted: Sun May 15, 2011 8:49 am

ajsr wrote:

softtop support bar is mine

but you will have to hold it for me for a week or so jas, unitl i can get over to grab it.

not a problem mate. ill leave it where it is. can check out the other crap i have when ya come over.

_________________
B4T

Built by me to be driven like a rental

bohuler

az supporter

Joined: Wed Nov 10, 2010 9:18 am
Posts: 1376
Location: Avonsleigh, Victoria

Posted: Sun May 15, 2011 10:13 am

I wanted a pic of what the gear on the started motor looked liked. I have one on my car atm is stuffed as is the second spare one I have. If the gear bit that spins the flywheel is in good nick I will take it

Dave

p.s, didn't happen to find a swift water pump to go with the crank pulley?

_________________
Life's short, fiddle with your willy while you can

remydog05

Joined: Sun Nov 23, 2008 10:30 pm
Posts: 1260
Location: Vic

Posted: Sun May 15, 2011 10:29 am

I will take the spare 15x8 if no one needs it mate, I have 4 and that can be the spare.

Built4thrashing

Joined: Wed May 21, 2008 11:30 pm
Posts: 4972
Location: Dandenong .Vic
Vehicle: 1999 GV. Locked and Lifted

Posted: Sun May 15, 2011 11:09 am

remydog05 wrote:

I will take the spare 15x8 if no one needs it mate, I have 4 and that can be the spare.

.

done. ill put it aside with AJSR's bar.

bohuler wrote:

Dave

p.s, didn't happen to find a swift water pump to go with the crank pulley?

Starter is near new so shouldnt be anything wrong with it. Usually its the flywheel that that wears out. And no i dont have a swift water pump here.

_________________
B4T

Built by me to be driven like a rental

bluzooker89

az supporter

Joined: Sun Mar 14, 2010 10:30 pm
Posts: 89
Location: western australia

Posted: Sun May 15, 2011 12:26 pm

How much to get the shackles sent to Perth western Australia 6054

_________________
built not bought

Built4thrashing

Joined: Wed May 21, 2008 11:30 pm
Posts: 4972
Location: Dandenong .Vic
Vehicle: 1999 GV. Locked and Lifted

Posted: Sun May 15, 2011 9:42 pm

bluzooker89 wrote:

How much to get the shackles sent to Perth western Australia 6054

about $15.00

_________________
B4T

Built by me to be driven like a rental

tonyevans

az supporter

Joined: Sun Jan 16, 2011 11:18 pm
Posts: 1998
Location: Lightning Ridge NSW
Vehicle: SJ40 - LJ50 - LJ50V - Vitara

Posted: Sun May 15, 2011 10:16 pm

How much for the fuel tank posted to Walgett - NSW 2832 please - Tony

_________________
Old farts sometimes know some stuff you don't.

dank

Joined: Sat Apr 05, 2008 10:30 pm
Posts: 1157
Location: VIC
Vehicle: WR250F/Jeep XJ

Posted: Mon May 16, 2011 5:10 am

someone has to grab those RUF springs too. Jas is the spring master, they are perfectly setup ready to go! Bargain!

_________________
LIKE US ON FACEBOOK - KPD4x4

salih

az supporter

Joined: Tue Oct 06, 2009 10:30 pm
Posts: 1475
Location: melbourne

Posted: Mon May 16, 2011 7:01 am

im already talking to him about it...

remydog05

Joined: Sun Nov 23, 2008 10:30 pm
Posts: 1260
Location: Vic

Posted: Mon May 16, 2011 7:16 am

dank wrote:

someone has to grab those RUF springs too. Jas is the spring master, they are perfectly setup ready to go! Bargain!

mmm???? no ya got me thinking?
wonder if they would handle the weight i have?
eg, eng auto and big fuel tank!

westvic31

Joined: Tue May 03, 2011 9:17 pm
Posts: 7
Location: Colac, Victoria

Posted: Mon May 16, 2011 10:05 am

I will take the springs if there still available

Built4thrashing

Joined: Wed May 21, 2008 11:30 pm
Posts: 4972
Location: Dandenong .Vic
Vehicle: 1999 GV. Locked and Lifted

Posted: Mon May 16, 2011 10:16 am

first in gets the springs. But dont worry as i do have others i can make into another set.

_________________
B4T

Built by me to be driven like a rental

remydog05

Joined: Sun Nov 23, 2008 10:30 pm
Posts: 1260
Location: Vic

Posted: Mon May 16, 2011 10:27 am

Cool

Westvic gets them

Built4thrashing

Joined: Wed May 21, 2008 11:30 pm
Posts: 4972
Location: Dandenong .Vic
Vehicle: 1999 GV. Locked and Lifted

Posted: Mon May 16, 2011 10:41 am

Found the HD tow bar behind garage under a pile of tyres im collecting.
will suit a WT or maybe a NT.

$50. No tongue.

_________________
B4T

Built by me to be driven like a rental

Built4thrashing

Joined: Wed May 21, 2008 11:30 pm
Posts: 4972
Location: Dandenong .Vic
Vehicle: 1999 GV. Locked and Lifted

Posted: Mon May 16, 2011 10:58 am

tonyevans wrote:

How much for the fuel tank posted to Walgett - NSW 2832 please - Tony

I wont post a fuel tank. Unsure if aus post would allow it.

_________________
B4T

Built by me to be driven like a rental

bohuler

az supporter

Joined: Wed Nov 10, 2010 9:18 am
Posts: 1376
Location: Avonsleigh, Victoria

Posted: Tue May 17, 2011 10:35 am

I will take th starter motor then

Will be able to drop in after work 'bout 4:30-5:00ish. Would you be home then?
Dave

_________________
Life's short, fiddle with your willy while you can

ajsr

az supporter

Joined: Sun Dec 28, 2008 10:30 pm
Posts: 3712
Location: melb

Posted: Tue May 17, 2011 11:00 am

hey dave want to pick up my hoop from jas for me???
cheers andrew

bohuler

az supporter

Joined: Wed Nov 10, 2010 9:18 am
Posts: 1376
Location: Avonsleigh, Victoria

Posted: Tue May 17, 2011 11:27 am

no worries mate, send me a message on 0242-665-882 with your address. I will drop round to jas's place this week sometime and drop it round to yours.

Dave

_________________
Life's short, fiddle with your willy while you can

Built4thrashing

Joined: Wed May 21, 2008 11:30 pm
Posts: 4972
Location: Dandenong .Vic
Vehicle: 1999 GV. Locked and Lifted

Posted: Wed May 25, 2011 7:31 am

parts list has been updated.

_________________
B4T

Built by me to be driven like a rental

Page 1 of 1

[ 25 posts ]

Board index » Shift It And Find It » Getting rid of stuff

Who is online

Users browsing this forum: No registered users and 6 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum