auszookers.com • View topic

Board index » Talking About Stuff » Suzuki Talk

92 barina engine

Page 1 of 1

[ 12 posts ]

Print view

Previous topic | Next topic

Author

Message

stewy91

az supporter

Joined: Thu Aug 26, 2010 11:16 am
Posts: 287
Location: deception bay

Posted: Mon May 16, 2011 10:33 pm

hey guys i was just wondering if a 92 barina engine would bolt straight in to my sierra i have heard they do but just want to be sure.

gypsy

az supporter

Joined: Mon Oct 27, 2008 10:30 pm
Posts: 1027
Location: north brisbane
Vehicle: lj81 stockman

Posted: Mon May 16, 2011 11:07 pm

it will have to change the carby but

_________________
the wobble rocks

stewy91

az supporter

Joined: Thu Aug 26, 2010 11:16 am
Posts: 287
Location: deception bay

Posted: Mon May 16, 2011 11:09 pm

okay thanks for that just wanted to make sure and im about to get my carby rebuilt anyway so that will work out thanks for that.

zuk_244

Joined: Sun Jun 28, 2009 11:30 pm
Posts: 170
Location: Wangaratta, Vic

Posted: Mon May 16, 2011 11:20 pm

Might have to swap the sump, oil pick up and mounts to.

stewy91

az supporter

Joined: Thu Aug 26, 2010 11:16 am
Posts: 287
Location: deception bay

Posted: Mon May 16, 2011 11:40 pm

okay well i will just check it all i when i put it in and then i will go from there my main worry was just if it lined up with the box

Kermy87

Joined: Mon Sep 13, 2010 10:13 am
Posts: 348
Location: Hervey bay QLD

Posted: Tue May 17, 2011 12:07 am

Same block bud, no worries bout lining up with the gearbox

_________________
Sik as drover, 32" mongrels, 4age 20v, 2" sus, 2"

fordem

Joined: Mon Apr 19, 2010 11:30 pm
Posts: 2655
Location: Georgetown, Guyana
Vehicle: JB420, APK416, A6G415, A6N415

Posted: Tue May 17, 2011 12:09 am

I believe the distributor will also need to be replaced.

stewy91

az supporter

Joined: Thu Aug 26, 2010 11:16 am
Posts: 287
Location: deception bay

Posted: Tue May 17, 2011 12:14 am

okay good would the dizzy just be a straight swap.

Zook_Fan

az supporter

Joined: Thu Mar 13, 2008 10:30 pm
Posts: 4530
Location: Toowoomba
Vehicle: Maruti and LJ80's

Posted: Tue May 17, 2011 12:29 am

as per: http://www.auszookers.com/index.php?nam ... ic&t=20699

The cam needs to be changed to put the sierra distributor on. You will also have to change alternator or alternator pulley, inlet manifold, fuel pump, water pump or put a thermo fan on, crank pulley if you change water pump.

stewy91

az supporter

Joined: Thu Aug 26, 2010 11:16 am
Posts: 287
Location: deception bay

Posted: Tue May 17, 2011 1:00 am

Well i have the 110 ford alt so thats not a problem a already run a thermo ill change manifold when carby is finished so that just leaves the camshaft and how hard is that to change

jdk81

Joined: Sat Jul 18, 2009 11:30 pm
Posts: 2372
Location: Ballarat, VIC

Posted: Tue May 17, 2011 1:08 am

its easy, just remember to remove fuel pump first and remove the pin which is driven off the cam shaft.

If you forget to remove this pin, you will have a hard time removing the camshaft and end up damaging the head.

stewy91

az supporter

Joined: Thu Aug 26, 2010 11:16 am
Posts: 287
Location: deception bay

Posted: Tue May 17, 2011 1:10 am

okay well i will get a manual just to be sure thanks for the help guys greatly appreciated.

Page 1 of 1

[ 12 posts ]

Board index » Talking About Stuff » Suzuki Talk

Who is online

Users browsing this forum: No registered users and 52 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum