auszookers.com • View topic - WT : Vit Power Steer Box

Board index » Shift It And Find It » I Want it I Want it I want it

WT : Vit Power Steer Box

Page 1 of 1

[ 8 posts ]

Print view

Previous topic | Next topic

Author

Message

Rusho

Tubby Elfsdong

Joined: Sun Aug 02, 2009 11:30 pm
Posts: 6501
Location: Northside, Brisbane
Vehicle: Coily Sierra

Posted: Sat May 28, 2011 9:33 pm

Hi All,

As title suggests. Preferably in a condition that suits rebuild (cheap

) as I have the lowrange seal kit and want to have a crack at rebuilding one.

You can even have my old leaky one back after I finish with it.. :lol:

PM me if you can help out.

Cheers

Rusho

31zook

Joined: Tue Mar 24, 2009 10:30 pm
Posts: 9242
Location: maito
Vehicle: <3 Edna <3

Posted: Sat May 28, 2011 11:10 pm

hey rusho, your going to find that this is different from anything else you have done, there is a spiral ball bearing system on the ram, that it a bugger to get in again :lol:

make sure your slow/methodical and put the BB's in a spot where they can't be lost. (or in my case i used a icecream container and i managed to drop the ram on icecream container and fly my 30BB's across the shed

) and you need to pull this apart to get to some more important seals. good luck

Rusho

Tubby Elfsdong

Joined: Sun Aug 02, 2009 11:30 pm
Posts: 6501
Location: Northside, Brisbane
Vehicle: Coily Sierra

Posted: Sat May 28, 2011 11:13 pm

Precisely why I want another one :lol:

It would be my luck that I take out the one in it and the thing implodes bb's everywhere. That, and it would make my car kind of hard to drive to work without a steering box :roll:

Any other tips 31zook :wink:

steak_knife

az supporter

Joined: Fri May 22, 2009 11:30 pm
Posts: 21335
Location: Smart Ass Island

Posted: Sat May 28, 2011 11:26 pm

Rusho wrote:

Any other tips

Pay some prick that knows what they are doing to do it..... :roll:

_________________
I used to be indecisive,
now I'm not so sure.....

Rusho

Tubby Elfsdong

Joined: Sun Aug 02, 2009 11:30 pm
Posts: 6501
Location: Northside, Brisbane
Vehicle: Coily Sierra

Posted: Sat May 28, 2011 11:33 pm

steak_knife wrote:

Rusho wrote:

Any other tips

Pay some prick that knows what they are doing to do it..... :roll:

How much do you want?? When can I bring it over :wink:

steak_knife

az supporter

Joined: Fri May 22, 2009 11:30 pm
Posts: 21335
Location: Smart Ass Island

Posted: Sat May 28, 2011 11:36 pm

Rusho wrote:

steak_knife wrote:

Rusho wrote:

Any other tips

Pay some prick that knows what they are doing to do it..... :roll:

How much do you want?? When can I bring it over :wink:

_________________
I used to be indecisive,
now I'm not so sure.....

Rusho

Tubby Elfsdong

Joined: Sun Aug 02, 2009 11:30 pm
Posts: 6501
Location: Northside, Brisbane
Vehicle: Coily Sierra

Posted: Sat May 28, 2011 11:56 pm

steak_knife wrote:

Rusho wrote:

steak_knife wrote:

Rusho wrote:

Any other tips

Pay some prick that knows what they are doing to do it..... :roll:

How much do you want?? When can I bring it over :wink:

31zook

Joined: Tue Mar 24, 2009 10:30 pm
Posts: 9242
Location: maito
Vehicle: <3 Edna <3

Posted: Sun May 29, 2011 9:25 am

The seals are weird also and there is O-rings under most of the hydro seals. and on my box (not sure about your's) where the pitman arm bolts up there is a hydro seal sitting inside of an O-ring, kinda hard to explain, but thats about it. and it will feel really stiff till you use it a bit.... Just like rebuilding a motor, gear box, tcase, diff, be patient, don't do it when your stressed, and take time.

Page 1 of 1

[ 8 posts ]

Board index » Shift It And Find It » I Want it I Want it I want it

Who is online

Users browsing this forum: No registered users and 26 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum