auszookers.com • View topic

Board index » Talking About Stuff » Suzuki Talk

Barina engine

Page 1 of 1

[ 23 posts ]

Print view

Previous topic | Next topic

Author

Message

mcwilly

Joined: Sun Sep 21, 2008 11:30 pm
Posts: 867
Location: nsw, newcastle

Posted: Tue May 31, 2011 10:36 am

Does a 1996 1.3 efi barina engine fit into a Sierra and bolt up to te gearbox etc?

_________________
1996 sierra + 2" body lift + SPOA conversion + ome

SSSIERA

Joined: Tue Mar 22, 2011 1:26 pm
Posts: 1770
Location: Perth's RUF

Posted: Tue May 31, 2011 10:37 am

u would defs have to cut and weld the sump

_________________
THINKING BEFORE POSTING!!!

mcwilly

Joined: Sun Sep 21, 2008 11:30 pm
Posts: 867
Location: nsw, newcastle

Posted: Tue May 31, 2011 10:40 am

Oh k even spoa

_________________
1996 sierra + 2" body lift + SPOA conversion + ome

Gwagensteve

Joined: Thu Feb 26, 2009 10:30 pm
Posts: 13007
Location: Melbourne

Posted: Tue May 31, 2011 10:42 am

Cutting the sump with a SPOA? Maybe. Better to just swap a 1.3 sierra sump on.

You'll will have water neck and distributor problems. ( I assume it's a throttle body EFI motor) The distributor points straight out the back of the head, as does the water neck.

Steve.

atari4x4

az supporter

Joined: Mon Dec 11, 2006 10:30 pm
Posts: 34842
Location: East Radelayed
Vehicle: SV420+SV620 Vitara's

Posted: Tue May 31, 2011 10:45 am

SSSIERA wrote:

u would defs have to cut and weld the sump

are you for real? :roll:

_________________
You're just hating because you don't understand

93zook

Joined: Wed May 27, 2009 11:30 pm
Posts: 699
Location: perth

Posted: Tue May 31, 2011 10:46 am

would be able to just bolt the intake manifold on? or even just the throttle body??

Lukezuk

Joined: Tue May 31, 2011 9:09 am
Posts: 14
Location: Brisbane

Posted: Tue May 31, 2011 10:48 am

mcwilly wrote:

Does a 1996 1.3 efi barina engine fit into a Sierra and bolt up to te gearbox etc?

. Why would you want a berina engine in your car ??

Gwagensteve

Joined: Thu Feb 26, 2009 10:30 pm
Posts: 13007
Location: Melbourne

Posted: Tue May 31, 2011 10:50 am

Luke - Because they are fuel injected, are are easy to find in wreckers.

Yes, manifolds could be swapped, but you loose the thermostat and water neck on the inlet manifold - it's on the back of the head on the barina engine.

Steve

atari4x4

az supporter

Joined: Mon Dec 11, 2006 10:30 pm
Posts: 34842
Location: East Radelayed
Vehicle: SV420+SV620 Vitara's

Posted: Tue May 31, 2011 10:50 am

matfan, is that you?

_________________
You're just hating because you don't understand

Lukezuk

Joined: Tue May 31, 2011 9:09 am
Posts: 14
Location: Brisbane

Posted: Tue May 31, 2011 10:53 am

Ooh nice that be sweet but I heard that you can get a straight 6 from sone car that fits perfectly into a Sierra

Ben_Sierra

az supporter

Joined: Wed Sep 30, 2009 11:30 pm
Posts: 4472
Location: Perth

Posted: Tue May 31, 2011 11:23 am

Lukezuk wrote:

Ooh nice that be sweet but I heard that you can get a straight 6 from sone car that fits perfectly into a Sierra

Who's made a trolling profile then?

_________________
I want my old sig back

Lukezuk

Joined: Tue May 31, 2011 9:09 am
Posts: 14
Location: Brisbane

Posted: Tue May 31, 2011 11:27 am

Ben_Sierra wrote:

Lukezuk wrote:

Ooh nice that be sweet but I heard that you can get a straight 6 from sone car that fits perfectly into a Sierra

Who's made a trolling profile then?

Not trolling at all mate I am been serious my brothers mate told me about it so I was just wondering

steak_knife

az supporter

Joined: Fri May 22, 2009 11:30 pm
Posts: 21335
Location: Smart Ass Island

Posted: Tue May 31, 2011 11:29 am

Lukezuk wrote:

Ben_Sierra wrote:

Lukezuk wrote:

Ooh nice that be sweet but I heard that you can get a straight 6 from sone car that fits perfectly into a Sierra

Who's made a trolling profile then?

Not trolling at all mate I am been serious my brothers mate told me about it so I was just wondering

Was he drunk???

Or a plumber???? :lol:

_________________
I used to be indecisive,
now I'm not so sure.....

Lukezuk

Joined: Tue May 31, 2011 9:09 am
Posts: 14
Location: Brisbane

Posted: Tue May 31, 2011 11:31 am

It was at my 18th so I think he was lol

Red89

Joined: Tue Jan 12, 2010 10:30 pm
Posts: 2801
Location: Perth

Posted: Tue May 31, 2011 11:42 am

steak_knife wrote:

Lukezuk wrote:

Ben_Sierra wrote:

Lukezuk wrote:

Ooh nice that be sweet but I heard that you can get a straight 6 from sone car that fits perfectly into a Sierra

Who's made a trolling profile then?

Not trolling at all mate I am been serious my brothers mate told me about it so I was just wondering

Was he drunk???

Or a plumber???? :lol:

Fitter and turner, fits it in and turns it to shit :lol:

Lukezuk

Joined: Tue May 31, 2011 9:09 am
Posts: 14
Location: Brisbane

Posted: Tue May 31, 2011 12:02 pm

Agreed

AJjnr86

Joined: Sat May 21, 2011 12:39 pm
Posts: 17
Location: Albany WA

Posted: Tue May 31, 2011 12:10 pm

im fitting a barina motor into my SJ70, only cause the motor that came with it has been overheated. it is the same engine, i just have to swap my exhaust manifold, intake manifold, timing belt sprockets and pullies (only reason for replacing these is cause the barina engine was used by the apprentices for practicing adjusting tappets and harmonic balancer is missing)

i will need to compare sumps to know if i need to change that

Jester

Joined: Fri May 08, 2009 11:30 pm
Posts: 726
Location: Adelaide
Vehicle: 1985 Suzuki MightyBoy

Posted: Tue May 31, 2011 8:31 pm

mcwilly wrote:

Does a 1996 1.3 efi barina engine fit into a Sierra and bolt up to te gearbox etc?

1996 barina isnt that the 1.4L opel one, not related to a G13?

2stroker

Joined: Sun Sep 07, 2008 11:30 pm
Posts: 2689
Location: North Brisbane

Posted: Wed Jun 01, 2011 10:15 am

Jester wrote:

mcwilly wrote:

Does a 1996 1.3 efi barina engine fit into a Sierra and bolt up to te gearbox etc?

1996 barina isnt that the 1.4L opel one, not related to a G13?

Jester you read my mind I think they have the Opel C14NZ engine, completely different family.

Ben_Sierra

az supporter

Joined: Wed Sep 30, 2009 11:30 pm
Posts: 4472
Location: Perth

Posted: Wed Jun 01, 2011 10:56 am

2stroker wrote:

Jester wrote:

mcwilly wrote:

Does a 1996 1.3 efi barina engine fit into a Sierra and bolt up to te gearbox etc?

1996 barina isnt that the 1.4L opel one, not related to a G13?

Jester you read my mind I think they have the Opel C14NZ engine, completely different family.

Thats a good point... There were no G13 Barinas in 96... 1994 was when they changed from the Swift to the Opel Corsa...

_________________
I want my old sig back

mcwilly

Joined: Sun Sep 21, 2008 11:30 pm
Posts: 867
Location: nsw, newcastle

Posted: Wed Jun 01, 2011 1:20 pm

That's why I was checking I'm not really a barina expert lol

_________________
1996 sierra + 2" body lift + SPOA conversion + ome

SSSIERA

Joined: Tue Mar 22, 2011 1:26 pm
Posts: 1770
Location: Perth's RUF

Posted: Thu Jun 02, 2011 3:05 pm

atari4x4 wrote:

SSSIERA wrote:

u would defs have to cut and weld the sump

are you for real? :roll:

????

_________________
THINKING BEFORE POSTING!!!

xedent

az supporter

Joined: Mon Jun 15, 2009 11:30 pm
Posts: 895
Location: Sunshine Coast, QLD
Vehicle: LWB Maruthi on WT Diffs!

Posted: Thu Jun 02, 2011 7:26 pm

steak_knife wrote:

Lukezuk wrote:

Ben_Sierra wrote:

Lukezuk wrote:

Ooh nice that be sweet but I heard that you can get a straight 6 from sone car that fits perfectly into a Sierra

Who's made a trolling profile then?

Not trolling at all mate I am been serious my brothers mate told me about it so I was just wondering

Was he drunk???

Or a plumber???? :lol:

Where not that bad are we ?

Hahaha

_________________
My Maruti build, Click WWW

Page 1 of 1

[ 23 posts ]

Board index » Talking About Stuff » Suzuki Talk

Who is online

Users browsing this forum: No registered users and 433 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum