auszookers.com • View topic - Question regarding 1.6 conversion. sump change

Board index » Talking About Stuff » Suzuki Talk

Question regarding 1.6 conversion. sump change

Page 1 of 1

[ 7 posts ]

Print view

Previous topic | Next topic

Author

Message

fatz

Joined: Mon Sep 14, 2009 11:30 pm
Posts: 152
Location: tasmania

Posted: Thu Jun 16, 2011 8:40 am

Hey guys,
starting my 1.6 conversion, and i dummy fitted the motor in today with the baleno 1.6 sump on, and there is 170mm clearance from the sump to the diff.
Is this normal? if so why do people change the sump over?
Can you see m having any difficulties if i leave the 1.6 on there?
thanks

I have a 2" bl and shackle ext

I have uploaded a couple of dodgey pics to help interpret what im talking about

mnemonix

az supporter

Joined: Sun Aug 16, 2009 11:30 pm
Posts: 1409
Location: Newcastle NSW
Vehicle: '96 LWB trayback

Posted: Thu Jun 16, 2011 8:54 am

The photos don't show the angle all that well, but usually there is less clearance than that.
My last zook was SPUA and needed the 1.3sump before the car could be driven, clearance was so tight.

My current zook is SPOA and has the 1.6 sump. Even in spring over configuration I don't have anything near the 170mm clearance you mention.
My high steer components will interfere with the sump as the suspension compresses.

_________________
Twin charged twin cam twin locked webwheeler

BlueSuzy

az supporter

Joined: Sun May 04, 2008 11:30 pm
Posts: 9716
Location: NSW
Vehicle: SJ51 LWB, SJ70 SWB

Posted: Thu Jun 16, 2011 9:27 am

My idea is the 1.3 sump is more suited to offroad as the pickup will mostly always stay in oil because of the deep section in the sump, on inclines etc.

_________________

BlueSuzy wrote:

I'm over the G16b's.

Gwagensteve

Joined: Thu Feb 26, 2009 10:30 pm
Posts: 13007
Location: Melbourne

Posted: Thu Jun 16, 2011 9:29 am

BlueSuzy wrote:

My idea is the 1.3 sump is more suited to offroad as the pickup will mostly always stay in oil because of the deep section in the sump, on inclines etc.

X2 - started typing that and got distracted. I think the drop on the Baleno sump is the wrong way around for a North/South engined 4WD.

bron5on

Joined: Thu Apr 02, 2009 10:30 pm
Posts: 285
Location: Hobart
Vehicle: SJ80

Posted: Thu Jun 16, 2011 9:50 am

I am currently running 50mm hd ome springs and 2" ext shackles and have had no drama with the 1.6 sump. I'm planning on dropping the shackles soon for better road manners so I may run into dramas then. Am hoping moving the diff forward 20mm might solve it. When you took your measurements, was the entire engine weight on the springs or were you still holding the engine with the crane?

Edit: Sorry, wasn't paying enough attention, I have a vit 1.6, not baleno, couldn't tell you the difference between sumps...

Gwagensteve

Joined: Thu Feb 26, 2009 10:30 pm
Posts: 13007
Location: Melbourne

Posted: Thu Jun 16, 2011 10:13 am

The baleno sump is angled and quite shallow.

it's not built for the hektic angles.

Steve.

fatz

Joined: Mon Sep 14, 2009 11:30 pm
Posts: 152
Location: tasmania

Posted: Thu Jun 16, 2011 10:23 pm

Thanks for your replies fellas,
You knowledge and assistance has been greatly appreciated.

Page 1 of 1

[ 7 posts ]

Board index » Talking About Stuff » Suzuki Talk

Who is online

Users browsing this forum: No registered users and 392 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum