[Mike]

i'm trying to remove the door panel out of my sierra, i've removed the handle, door latch window winder an that strap thing bit i can't seem to get the panel off how can i get the panel off without damaging it?

Cheers

[kanejones]

Should just pop off? Its held by little press in clips, try getting the top, middle out first, and work to the edges. Flat head sxrew driver may help..

[Zook_Fan]

yeah i work from top back corner around. you have to be fairly forceful but not tair the studs out all the same

[Damo]

See if you can located the studs and lever right next to them.

[lump_a_charcoal]

Yeah try and lever with something like a steel rule but stiffer... Maybe a stiff paint scraper...

[jbonevia]

yep, just took mine off the other day to install central locking, i used a steel ruler, just slid it in next to each tab and pulled it outwards, they just pop out.

[jimbo_jones]

you can buy a trim tool at super cheap that will slide around both side's of the clip