| Author |
Message |
Highway-Star
Joined: Thu Apr 30, 2009 11:30 pm Posts: 4109 Location: Ipswich
Vehicle: LJ80V-II (a proper Stockman)
|
 Posted: Mon Jun 20, 2011 2:52 am |
|
It's an Aluminium tray. Originally from an LJ81, so hence will bolt straight onto one of them. It may be suitable for use on something else, ie Sierra or Maruti or Daihatsu or a roof rack for VW Golf...
Dimensions are appropriately 1650mm, 1540mm wide. There are no tail lights etc. There is a notable dint in the head board which could be fixed. Has all 4 wheel guard pieces, and a spare tyre cradle that suits a 6.00-16 (may suit other sizes).
Looking for around $400. Located near Ipswich. PM or reply to this for more info.
 _________________ Clearance Hole Technology 
|
|
|
|
|
Highway-Star
Joined: Thu Apr 30, 2009 11:30 pm Posts: 4109 Location: Ipswich
Vehicle: LJ80V-II (a proper Stockman)
|
Posted: Wed Jun 22, 2011 3:37 am |
|
Can deliver locally for a small negotiated fee  _________________ Clearance Hole Technology
|
|
|
|
|
Fatzook
az supporter
Joined: Sat Oct 27, 2007 11:30 pm Posts: 14977 Location: The Hills
Vehicle: Vitara, NGV
|
Posted: Wed Jun 22, 2011 4:05 am |
|
Hey mate.
Looks like the head board and side rail are bent. So is the drop side gate. To fix these parts would require the entire tray to be stripped appart ( which is a C#@T of a job!!) And panel beaten. Given that its ally, it will always look like its been hammered straight.
Have a look on Ebay at how much these things sell for when in good condition. Its not much at all. I sold the alloy tray from my ute with sides and a torneau cover for $150! It also had rubber matting on the floor. Tray was straight. Had lights also.
$400-500 will get you a near new falcon alloy tray from the local rags or gumtree etc, with lights, no damage.
If you repaired it or made it into a trailer (after you repaired it) you could get some better money for it I reckon. 
_________________
2013 GV
1998 SV420 ute
|
|
|
|
|
Highway-Star
Joined: Thu Apr 30, 2009 11:30 pm Posts: 4109 Location: Ipswich
Vehicle: LJ80V-II (a proper Stockman)
|
Posted: Wed Jun 22, 2011 4:15 am |
|
Fatzook wrote: Hey mate. Looks like the head board and side rail are bent. So is the drop side gate. To fix these parts would require the entire tray to be stripped appart ( which is a C#@T of a job!!) And panel beaten. Given that its ally, it will always look like its been hammered straight. Have a look on Ebay at how much these things sell for when in good condition. Its not much at all. I sold the alloy tray from my ute with sides and a torneau cover for $150! It also had rubber matting on the floor. Tray was straight. Had lights also. $400-500 will get you a near new falcon alloy tray from the local rags or gumtree etc, with lights, no damage. If you repaired it or made it into a trailer (after you repaired it) you could get some better money for it I reckon. Headboard is bent. Dropside isn't, but your right, it looks farked in the photo 
OK, I really didn't have a clue on price. I know my father priced around for crappy old alloy trays off Hilux's and most were around $800-$1000 second hand... So he built a steel one.
Well I'm open to any offers. If its not worth much, I got some steel to take for scrap soon, If I still have it then, I might flog it off for scrap aluminium. _________________ Clearance Hole Technology
|
|
|
|
|
tanshi
az supporter
Joined: Tue Jan 09, 2007 10:30 pm Posts: 7717 Location: Brisbane
|
Posted: Wed Jun 22, 2011 4:24 am |
|
|
at this rate i might be sending my bullbarr in at the same time
|
|
|
|
|
Fatzook
az supporter
Joined: Sat Oct 27, 2007 11:30 pm Posts: 14977 Location: The Hills
Vehicle: Vitara, NGV
|
Posted: Wed Jun 22, 2011 5:20 am |
|
I've scrapped a few alloy trays of similar condition to this one. Tried for a fair while to sell them first though.
Chuck it on ebay for 99c 
_________________
2013 GV
1998 SV420 ute
|
|
|
|
|
Highway-Star
Joined: Thu Apr 30, 2009 11:30 pm Posts: 4109 Location: Ipswich
Vehicle: LJ80V-II (a proper Stockman)
|
Posted: Wed Jun 22, 2011 6:09 am |
|
Fatzook wrote: I've scrapped a few alloy trays of similar condition to this one. Tried for a fair while to sell them first though. Chuck it on ebay for 99c I wouldn't have a clue how to sell on ebay, and anyway I don't have a paypal account and I think its mandatory? _________________ Clearance Hole Technology
|
|
|
|
|
Fatzook
az supporter
Joined: Sat Oct 27, 2007 11:30 pm Posts: 14977 Location: The Hills
Vehicle: Vitara, NGV
|
Posted: Wed Jun 22, 2011 6:47 am |
|
Highway-Star wrote: Fatzook wrote: I've scrapped a few alloy trays of similar condition to this one. Tried for a fair while to sell them first though. Chuck it on ebay for 99c I wouldn't have a clue how to sell on ebay, and anyway I don't have a paypal account and I think its mandatory? Its not. Just list the ad with COD as the prefered payment option. There are fees accosiated with paypal, so its not legal for Ebay to force you to use paypal ( which is owned by ebay).
_________________
2013 GV
1998 SV420 ute
|
|
|
|
|
Highway-Star
Joined: Thu Apr 30, 2009 11:30 pm Posts: 4109 Location: Ipswich
Vehicle: LJ80V-II (a proper Stockman)
|
Posted: Tue Jun 28, 2011 1:40 am |
|
OK I tired to figure out selling on ebay. Way too bloody hard!!!
$100ono?  _________________ Clearance Hole Technology
|
|
|
|
|
reallyuted
Joined: Fri Nov 14, 2008 10:30 pm Posts: 253 Location: jimboomba se QLD
|
Posted: Tue Jun 28, 2011 9:15 am |
|
|
|
|
Highway-Star
Joined: Thu Apr 30, 2009 11:30 pm Posts: 4109 Location: Ipswich
Vehicle: LJ80V-II (a proper Stockman)
|
Posted: Sun Jul 03, 2011 10:48 pm |
|
|
SOLD
_________________ Clearance Hole Technology
|
|
|
|
|
Fatzook
az supporter
Joined: Sat Oct 27, 2007 11:30 pm Posts: 14977 Location: The Hills
Vehicle: Vitara, NGV
|
Posted: Mon Jul 04, 2011 12:47 am |
|
Highway-Star wrote: OK I tired to figure out selling on ebay. Way too bloody hard!!!
_________________
2013 GV
1998 SV420 ute
|
|
|
|
|
|
