| Author |
Message |
Ruthless
Joined: Tue Jan 11, 2011 8:50 am Posts: 1049 Location: Brisvagas
|
 Posted: Sun Jul 17, 2011 6:39 am |
|
|
I'm selling my g13b motor and gearbox out of my Sierra i got it as an exchange motor from suzisport at lawnton 9xxx km's ago
I put a excedy performance clutch in it at the same time
It has all the bolt on's ready to drop the motor straight in. it was all dyno tuned by Brisbane turbo and tuning and birsbane turbo did it's first service as suzisport wanted it to cover it under warranty
It still under warranty I have all the receipts for it
I'm selling it because I'm upgrading to a 4age
The motor is still in the car and drivable if you wanted to come and see it
$1800
Contact Nathan on 0448189105 or pm me
Brisbane
Last edited by Ruthless on Sun Jul 31, 2011 9:09 am, edited 2 times in total.
|
|
|
|
 |
SuziBlu
Joined: Mon Sep 14, 2009 11:30 pm Posts: 4268 Location: Eyre Peninsula
|
 Posted: Sun Jul 17, 2011 10:59 am |
|
|
Where are the tuning graphs.
_________________ Bad decisions make good stories.
|
|
|
|
 |
Ruthless
Joined: Tue Jan 11, 2011 8:50 am Posts: 1049 Location: Brisvagas
|
 Posted: Sun Jul 17, 2011 11:21 am |
|
|
They didn't print any off because it's all stock and they were just seeing if it made full horse power and checked timing an a few other bits and pieces
_________________ rust is lighter then carbon fiber
|
|
|
|
 |
Ruthless
Joined: Tue Jan 11, 2011 8:50 am Posts: 1049 Location: Brisvagas
|
 Posted: Tue Jul 19, 2011 10:29 am |
|
|
Bump
_________________ rust is lighter then carbon fiber
|
|
|
|
 |
Ruthless
Joined: Tue Jan 11, 2011 8:50 am Posts: 1049 Location: Brisvagas
|
 Posted: Thu Jul 21, 2011 1:01 am |
|
|
Offers
_________________ rust is lighter then carbon fiber
|
|
|
|
 |
Ruthless
Joined: Tue Jan 11, 2011 8:50 am Posts: 1049 Location: Brisvagas
|
 Posted: Fri Jul 22, 2011 8:51 am |
|
|
Bump
_________________ rust is lighter then carbon fiber
|
|
|
|
 |
Ruthless
Joined: Tue Jan 11, 2011 8:50 am Posts: 1049 Location: Brisvagas
|
 Posted: Fri Jul 22, 2011 10:27 am |
|
|
If someone came to me with a REASONABLE offer I would consider it
Pretty keen to get rid of it before I put the new 4age motor in while you can still see it in the car working and drivable
_________________ rust is lighter then carbon fiber
|
|
|
|
 |
Ruthless
Joined: Tue Jan 11, 2011 8:50 am Posts: 1049 Location: Brisvagas
|
 Posted: Sat Jul 23, 2011 8:12 am |
|
|
Price drop $1500 Ono
_________________ rust is lighter then carbon fiber
|
|
|
|
 |
Junior_91
Joined: Tue Mar 17, 2009 10:30 pm Posts: 1084 Location: Ipswich
|
 Posted: Sat Jul 23, 2011 8:55 am |
|
|
Is this EFi?
_________________ TWIN LOCK IT & JUST DRIVE!
|
|
|
|
 |
Ruthless
Joined: Tue Jan 11, 2011 8:50 am Posts: 1049 Location: Brisvagas
|
 Posted: Sat Jul 23, 2011 9:08 am |
|
|
No its a standard Sierra carby motor reconditioned
_________________ rust is lighter then carbon fiber
|
|
|
|
 |
Junior_91
Joined: Tue Mar 17, 2009 10:30 pm Posts: 1084 Location: Ipswich
|
 Posted: Sat Jul 23, 2011 9:09 am |
|
|
Oh ok well nah i want efi
_________________ TWIN LOCK IT & JUST DRIVE!
|
|
|
|
 |
Ruthless
Joined: Tue Jan 11, 2011 8:50 am Posts: 1049 Location: Brisvagas
|
 Posted: Mon Jul 25, 2011 10:23 pm |
|
|
Bump
_________________ rust is lighter then carbon fiber
|
|
|
|
 |
Ruthless
Joined: Tue Jan 11, 2011 8:50 am Posts: 1049 Location: Brisvagas
|
 Posted: Sun Jul 31, 2011 9:09 am |
|
|
$1000 need the motor gone the 4age is about to go in and i dont have the room for this motor and gearbox and im NOT negotiable at that price that is a really good price as it owes me over $2500
_________________ rust is lighter then carbon fiber
|
|
|
|
 |
Ruthless
Joined: Tue Jan 11, 2011 8:50 am Posts: 1049 Location: Brisvagas
|
 Posted: Mon Aug 01, 2011 10:30 am |
|
|
Bump
_________________ rust is lighter then carbon fiber
|
|
|
|
 |
Che

az supporter
Joined: Thu Mar 11, 2010 10:30 pm Posts: 2401 Location: Perth
Vehicle: LPG 1.6 Sierra
|
 Posted: Tue Aug 02, 2011 9:02 am |
|
|
Willing to get it freighted to Perth? I'm definitely interested but I'd need to get it sent over here. I'll pay for freight costs and inconvenience costs... if you're down with that. I wouldn't need any bolt on parts (manifolds, alt, etc)
Are Suzisport reputable rebuilders?... I don't doubt you Ruthless, just don't know of their reputation
|
|
|
|
 |
Ruthless
Joined: Tue Jan 11, 2011 8:50 am Posts: 1049 Location: Brisvagas
|
 Posted: Tue Aug 02, 2011 8:07 pm |
|
che_guitarra wrote: Willing to get it freighted to Perth? I'm definitely interested but I'd need to get it sent over here. I'll pay for freight costs and inconvenience costs... if you're down with that. I wouldn't need any bolt on parts (manifolds, alt, etc)
Are Suzisport reputable rebuilders?... I don't doubt you Ruthless, just don't know of their reputation
Sending it to Perth isn't a problem and suzi sport get another bloke to rebuild it I don't know who but they said everything got machined or replaced and it gets covered under there 12 month 20 000.km Warrenty I can't tell you anymore then that maybe someone else on here would know more
|
|
|
|
 |
Ruthless
Joined: Tue Jan 11, 2011 8:50 am Posts: 1049 Location: Brisvagas
|
 Posted: Mon Aug 15, 2011 6:59 am |
|
|
still for sale
_________________ rust is lighter then carbon fiber
|
|
|
|
 |
Ruthless
Joined: Tue Jan 11, 2011 8:50 am Posts: 1049 Location: Brisvagas
|
 Posted: Tue Aug 23, 2011 7:53 am |
|
|
bump
_________________ rust is lighter then carbon fiber
|
|
|
|
 |
|