[Friski]

Hi All,

Instead of a half cut I manage to get a decent 97 2.0 4 cylinder swb and wanted to know if the front and rear bars as well as suspension are interchangeable?

Current car being 92 G16A swb with bull bars (front & rear), 2 inch body lift and 2 inch raised suspension.

Thanks in advance, did do a search but nothing definate.

Mic

[alexvitara]

sv420 will have a different chassis so the bars wont fit without mods.
most of the suspension should be the same.

[fordem]

alexvitara wrote:

sv420 will have a different chassis so the bars wont fit without mods.
most of the suspension should be the same.

Suspension should be the same means what - same as the first statement - won't fit without mods - or same as the SE416, so it will fit without mods?

The chassis is wider and I'm pretty certain the suspension is different, wider cast control arms, as compared to pressed steel.

[alexvitara]

well calmini kit fits both so i assume the suspention is the same.
i was told control arms are the same size, the extra width comes from the wider chassis.

[vitzookman]

Your 2inch suspension lift in the front will become a 1 inch lift.

[atari4x4]

they are exactly the same but different.

[alexvitara]

yeh springs wont be the same bcause the 2L is heavier