auszookers.com • View topic - WT diffs (was NT diffs)

Board index » Shift It And Find It » I Want it I Want it I want it

WT diffs (was NT diffs)

Page 1 of 1

[ 11 posts ]

Print view

Previous topic | Next topic

Author

Message

Damo

az supporter

Joined: Sat Jul 22, 2006 11:30 pm
Posts: 4661
Location: Brisbane

Posted: Mon Aug 22, 2011 1:55 am

[quote="]I'm looking for a set (front & rear) of NT diffs. They're only to put under a chassis to keep it on wheels so I don't need brakes or front shafts or centres etc.[/quote]

Will take some WT if I can get them. Complete or otherwise

_________________
SJ50.4.LYF

Last edited by Damo on Wed Aug 24, 2011 4:59 am, edited 1 time in total.

tanshi

az supporter

Joined: Tue Jan 09, 2007 10:30 pm
Posts: 7717
Location: Brisbane

Posted: Mon Aug 22, 2011 2:02 am

LJ 80 diffs will do it to as long as its just to hold a chassis up.

aaron will have spare ones laying around

Highway-Star

Joined: Thu Apr 30, 2009 11:30 pm
Posts: 4109
Location: Ipswich
Vehicle: LJ80V-II (a proper Stockman)

Posted: Mon Aug 22, 2011 8:24 am

Sent you back a PM Damo

_________________
Clearance Hole Technology

Verm1n

Joined: Tue Oct 28, 2008 10:30 pm
Posts: 1395
Location: Ipswich

Posted: Mon Aug 22, 2011 11:12 am

tanshi wrote:

LJ 80 diffs will do it to as long as its just to hold a chassis up.

aaron will have spare ones laying around

I could prob do with the spare centres bahaha ;D

Highway-Star

Joined: Thu Apr 30, 2009 11:30 pm
Posts: 4109
Location: Ipswich
Vehicle: LJ80V-II (a proper Stockman)

Posted: Mon Aug 22, 2011 8:22 pm

Verm1n wrote:

tanshi wrote:

LJ 80 diffs will do it to as long as its just to hold a chassis up.

aaron will have spare ones laying around

I could prob do with the spare centres bahaha ;D

Spare 4.5's? I can't rid of the bloody things, all the SJ410 drivers won't take them because they are paranoid about doing more RPM :crazy:

. Seriously if you want them Brad, I'll do you some more swapping for some of that upholstery work I was talking to you about

_________________
Clearance Hole Technology

christover1

az supporter

Joined: Tue Jul 15, 2008 11:30 pm
Posts: 8203
Location: Melbourne
Vehicle: Pajero 91 NH 3.0 SWB

Posted: Mon Aug 22, 2011 10:51 pm

Highway-Star wrote:

Spare 4.5's? the SJ410 drivers won't take them because they are paranoid about doing more RPM

Best thing I did for my SJ410 was fit some 4:9's from an LJ.
With 31's it was brilliant.
On road 4:6's probably better, though.

_________________
VIC ZOOK CLUB
http://www.vic.suzuki4wd.com/forum/

Highway-Star

Joined: Thu Apr 30, 2009 11:30 pm
Posts: 4109
Location: Ipswich
Vehicle: LJ80V-II (a proper Stockman)

Posted: Tue Aug 23, 2011 7:56 am

christover1 wrote:

Highway-Star wrote:

Spare 4.5's? the SJ410 drivers won't take them because they are paranoid about doing more RPM

Best thing I did for my SJ410 was fit some 4:9's from an LJ.
With 31's it was brilliant.
On road 4:6's probably better, though.

Yeah I know, but you can't convince allot of people that F10's love to rev, and its doing them some favours. I think the 4.5's would be a tad high even with an otherwise stock 410 on 235/75R15's. But anyway.....

_________________
Clearance Hole Technology

christover1

az supporter

Joined: Tue Jul 15, 2008 11:30 pm
Posts: 8203
Location: Melbourne
Vehicle: Pajero 91 NH 3.0 SWB

Posted: Tue Aug 23, 2011 8:12 am

My 1.0 litre LWB could do 120 (probably 110)
on freeways, if no wind

When I stuck a 1.3 in, I was a tad disappointed on the highway,
but it was much better at low speeds off road.
1.0 litre 1st was a lot higher than the 1.3 first.

_________________
VIC ZOOK CLUB
http://www.vic.suzuki4wd.com/forum/

steak_knife

az supporter

Joined: Fri May 22, 2009 11:30 pm
Posts: 21335
Location: Smart Ass Island

Posted: Wed Aug 24, 2011 4:44 am

Buy the one's I have, save's pulling the thing's out again..... :helloo:

_________________
I used to be indecisive,
now I'm not so sure.....

Damo

az supporter

Joined: Sat Jul 22, 2006 11:30 pm
Posts: 4661
Location: Brisbane

Posted: Wed Aug 24, 2011 5:00 am

Damo wrote:

[quote="]I'm looking for a set (front & rear) of NT diffs. They're only to put under a chassis to keep it on wheels so I don't need brakes or front shafts or centres etc.

Will take some WT if I can get them. Complete or otherwise[/quote]

For those that won't look at the first post :helloo:

_________________
SJ50.4.LYF

steak_knife

az supporter

Joined: Fri May 22, 2009 11:30 pm
Posts: 21335
Location: Smart Ass Island

Posted: Wed Aug 24, 2011 5:05 am

That mean's reading, & bugger that !!!!!!

_________________
I used to be indecisive,
now I'm not so sure.....

Page 1 of 1

[ 11 posts ]

Board index » Shift It And Find It » I Want it I Want it I want it

Who is online

Users browsing this forum: No registered users and 5 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum