[orangeshannon]

hi i have a 94 vitara carby and im wanting to convert it to efi i got a doner car 91 vitara efi i just need a good diagram of the wires that i need as its a pain in the ass tring to find which is which if i can find a diagram of one thats had it done that would help me out alot i got the sensors from the passangers side done its just the main harness.
also im not wanting to cut the body wires as im going to put the carby parts on the doner to be able to try and sell it off. can you please help me. diagrams would help even more

[royce]

just swap the entire loom over

[orangeshannon]

the only thing is that the doner car is an automatic and the car i want to put it in is a manual

[Fity]

Auto won't matter, just pull the dash out and swap the harness over. The auto has an extra plug under the dash which goes to the T Bar (and extra pins in the ECU), otherwise interchangeable with a manual. Don't forget the speed sensor in the speedo.

[orangeshannon]

yep heard about them speed sensors. another thing is tat i plan on getting that other car to run as a carby engine but i could just cut both complete engine looms out and swap them both over and do something about the auto