It is currently Wed Jul 22, 2026 7:59 pm
Board index » Talking About Stuff » Suzuki Talk



Post new topic Reply to topic  [ 25 posts ] 
Author Message

Offline

Joined: Sun Sep 21, 2008 11:30 pm
Posts: 867
Location: nsw, newcastle

Post Posted: Mon Nov 17, 2008 5:50 am 
Reply with quote Top  
i was just wondering where the best place to purchase reduction gears from? also if i go the 6.5:1 am i gonna be able to drive on the beach at all? just wanna do the odd bit of beach fishing used mainly for bush work. also does anyone install these if not how hard is it?

_________________
1996 sierra + 2" body lift + SPOA conversion + ome

 Profile  

Offline
User avatar

Joined: Sun Jun 22, 2008 11:30 pm
Posts: 1265
Location: Chipping Norton

Post Posted: Mon Nov 17, 2008 11:11 am 
Reply with quote Top  
Probably loctup4x4 at the moment is the best place to buy from. Lowrange 4 wheel drive in the States is good, but given the value of the aussie dollar at the moment, may be better to wait a while. I have 6.5's in mine and I drive in high range on the beach unless I'm in really soft sand, then I switch to low range and use 3rd, 4th and 5th gear. In 5th gear with 31" tyres I guesstimate it's got a top speed of around 25km/h

_________________
We're riding in the Ninky Nonk!

 Profile  

Offline
az supporter
az supporter
User avatar

Joined: Wed Feb 28, 2007 10:30 pm
Posts: 4454
Location: Botany, NSW
Vehicle: MY2019 Jimny

Post Posted: Mon Nov 17, 2008 12:13 pm 
Reply with quote Top  
Yeah forget about buying them at the moment, unless you are rich.

I bought a set from locktup for about $700AU, and that was when the aussie was right up with the greenback...

 Profile  

Offline
User avatar

Joined: Thu Mar 29, 2007 11:30 pm
Posts: 14498
Location: Here there everywhere
Vehicle: A manly awesome man jimny

Post Posted: Mon Nov 17, 2008 12:42 pm 
Reply with quote Top  
i have TG 6.5s but wit the way the $ is i would look at a set of series 4 rockhoppers from BBM.
i think they are around $700.00.

 Profile  

Offline
User avatar

Joined: Sun Jun 22, 2008 11:30 pm
Posts: 1265
Location: Chipping Norton

Post Posted: Mon Nov 17, 2008 8:36 pm 
Reply with quote Top  
shep wrote:
i have TG 6.5s but wit the way the $ is i would look at a set of series 4 rockhoppers from BBM.
i think they are around $700.00.


They were, but I'm pretty sure they've gone up as well

_________________
We're riding in the Ninky Nonk!

 Profile  

Offline
User avatar

Joined: Thu Mar 29, 2007 11:30 pm
Posts: 14498
Location: Here there everywhere
Vehicle: A manly awesome man jimny

Post Posted: Mon Nov 17, 2008 9:13 pm 
Reply with quote Top  
Rockhopper wrote:
shep wrote:
i have TG 6.5s but wit the way the $ is i would look at a set of series 4 rockhoppers from BBM.
i think they are around $700.00.


They were, but I'm pretty sure they've gone up as well


yep, you are right. $749.00
http://www.bbmmotorsports.com.au/sierra.html

 Profile  

Offline

Joined: Sun Sep 21, 2008 11:30 pm
Posts: 867
Location: nsw, newcastle

Post Posted: Tue Nov 18, 2008 12:39 am 
Reply with quote Top  
so disregarding price which is the best gearset, quality and ratio's. and are these hard to install, what requires grinding?

_________________
1996 sierra + 2" body lift + SPOA conversion + ome

 Profile  

Offline
az supporter
az supporter
User avatar

Joined: Wed Feb 28, 2007 10:30 pm
Posts: 4454
Location: Botany, NSW
Vehicle: MY2019 Jimny

Post Posted: Tue Nov 18, 2008 12:44 am 
Reply with quote Top  
Trailgear ones have a lifetime warranty I think...

 Profile  

Offline
omnipotent being
omnipotent being
User avatar

Joined: Sun Jun 11, 2006 11:30 pm
Posts: 17216
Location: Pluto

Post Posted: Tue Nov 18, 2008 12:45 am 
Reply with quote Top  
the best ratio is the one that suits what you want to do and what tyres you have, I wouldnt have 6.5 in something with 31" or smaller, nor if you wanted to do a lot of beach work cause youll get teh shits with the speed gap

 Profile  

Offline

Joined: Wed Nov 19, 2008 10:30 pm
Posts: 12
Location: newcastle

Post Posted: Fri Nov 21, 2008 5:12 am 
Reply with quote Top  
hey clutch burner bye ya bullbar off ya........that ya bent

 Profile  

Offline
az supporter
az supporter
User avatar

Joined: Mon Jul 21, 2008 11:30 pm
Posts: 1785
Location: perth, WA
Vehicle: 85' LWB Sierra, 01' S15

Post Posted: Fri Nov 21, 2008 6:16 am 
Reply with quote Top  
do you guys know if rockhoppers come with a warranty? Anyone on here using them...what do you think of them?

_________________
79' LJ80 (sold) :(
95' & 97' sierra (sold)

 Profile  

Offline
az supporter
az supporter
User avatar

Joined: Mon Jul 21, 2008 11:30 pm
Posts: 1785
Location: perth, WA
Vehicle: 85' LWB Sierra, 01' S15

Post Posted: Fri Nov 21, 2008 6:17 am 
Reply with quote Top  
full step installation manual with pictures here

http://www.trail-gear.com/tech/zuk65gears/index.html

_________________
79' LJ80 (sold) :(
95' & 97' sierra (sold)

 Profile  

Offline
lesspostingmorewheeling
lesspostingmorewheeling
User avatar

Joined: Tue May 06, 2008 11:30 pm
Posts: 2236
Location: Under Down Under

Post Posted: Sat Nov 22, 2008 3:02 am 
Reply with quote Top  
i think rock hoppers come with a 1 or 2 year warranty

_________________
[quote="Fluffy"] yeah right mate like Im gunna mov

 Profile  

Offline
User avatar

Joined: Sun Mar 16, 2008 10:30 pm
Posts: 813
Location: Tasmania

Post Posted: Sun Nov 23, 2008 12:04 am 
Reply with quote Top  
hey mate.. i was running rockhopper 6:5-1 for around 1300k's.. and cause i didnt strengthen the housing, i broke the housing in half, and smashed the gears. (hint.. strengthen the housing BEFORE you install gears!) I ended up getting a complete transfer from America (low range off road), fitted with 6:5-1 trail gears, and it was totally complete, minus shifter and oil. 1 year warranty on case, lifetime on gears. Delivered in 5 days for $1360 for memory.

_________________
F&R ARB air lockers, lux diffs, 4 link coil rear,

 Profile  

Offline

Joined: Sun Sep 21, 2008 11:30 pm
Posts: 867
Location: nsw, newcastle

Post Posted: Sun Nov 23, 2008 1:49 am 
Reply with quote Top  
oh k sweet. so wat would u recommend one of the tranfer hd mounts? did u get customs fees etc when it was over the $1000

_________________
1996 sierra + 2" body lift + SPOA conversion + ome

 Profile  

Offline
User avatar

Joined: Sun Mar 16, 2008 10:30 pm
Posts: 813
Location: Tasmania

Post Posted: Sun Nov 23, 2008 6:17 pm 
Reply with quote Top  
nope, i dont believe i got any fee like that?? Sean is awesome to deal with to.. i reckon you would find it would be bugga all extra postage to get a "Cradle" sent over at the same time. Im sure Sean would send them both in the same package.. it would work out heaps cheaper. Not sure how mechanically minded you are, but it cost me an extra $260 for some new bearings, and for someone to install the gears for me (in my first transfer). By the time you add it all up, might be quicker and easier to deal through Sean?? Just a thought! http://www.lowrangeoffroad.com/samtcase.htm

_________________
F&R ARB air lockers, lux diffs, 4 link coil rear,

 Profile  

Offline
az supporter
az supporter
User avatar

Joined: Mon Oct 27, 2008 10:30 pm
Posts: 490
Location: Rosevears Tas

Post Posted: Mon Nov 24, 2008 12:52 pm 
Reply with quote Top  
At this time dont forget about our "poor" exchange rate at 62 cent 8O to the Australian dollar (8.25am monday 23-11). The box priced at $888.00 + postage will be $1435.50 + postage. We all should have bought more from the states when we were at 96 cents. Good luck

 Profile  

Offline
az supporter
az supporter
User avatar

Joined: Wed Feb 28, 2007 10:30 pm
Posts: 4454
Location: Botany, NSW
Vehicle: MY2019 Jimny

Post Posted: Mon Nov 24, 2008 1:02 pm 
Reply with quote Top  
TASSIETOYUKI wrote:
We all should have bought more from the states when we were at 96 cents. Good luck


Yes, and I kick myself for it every day... All I want is a mighty kong transfer case bracket, but it costs twice as much now...

George W Bush - Screw you!!!

 Profile  

Offline
az supporter
az supporter
User avatar

Joined: Mon Oct 27, 2008 10:30 pm
Posts: 490
Location: Rosevears Tas

Post Posted: Mon Nov 24, 2008 6:41 pm 
Reply with quote Top  
lump_a_charcoal wrote:
TASSIETOYUKI wrote:
We all should have bought more from the states when we were at 96 cents. Good luck


Yes, and I kick myself for it every day... All I want is a mighty kong transfer case bracket, but it costs twice as much now...

George W Bush - Screw you!!!

Aww.. c'mon whats wrong with ya. It is locally available for $412.90 delivered, when even with todays exchange rate from the states is $305.55 + delivery :roll:
..Hmm.. think our old matey "Bush" may have screwed himself :lol:

 Profile  

Offline
az supporter
az supporter
User avatar

Joined: Wed Feb 28, 2007 10:30 pm
Posts: 4454
Location: Botany, NSW
Vehicle: MY2019 Jimny

Post Posted: Mon Nov 24, 2008 9:45 pm 
Reply with quote Top  
Yeah I was quotes $270 originally...

 Profile  

Offline
User avatar

Joined: Thu Mar 29, 2007 11:30 pm
Posts: 14498
Location: Here there everywhere
Vehicle: A manly awesome man jimny

Post Posted: Mon Nov 24, 2008 10:47 pm 
Reply with quote Top  
lump_a_charcoal wrote:
TASSIETOYUKI wrote:
We all should have bought more from the states when we were at 96 cents. Good luck


Yes, and I kick myself for it every day... All I want is a mighty kong transfer case bracket, but it costs twice as much now...

George W Bush - Screw you!!!


i got my 6.5s and a stack of lockrights when it was 98cents us$
:woohoo:
also got a electric over air shifter for my bike nearly 80% cheaper then aust.

 Profile  

Offline
az supporter
az supporter
User avatar

Joined: Wed Feb 28, 2007 10:30 pm
Posts: 4454
Location: Botany, NSW
Vehicle: MY2019 Jimny

Post Posted: Tue Nov 25, 2008 1:37 am 
Reply with quote Top  
Got a lockrite you wanna sell?

I got my crawler gears when the dollar was good, so i did alright...

 Profile  

Offline
User avatar

Joined: Sat May 10, 2008 11:30 pm
Posts: 3273
Location: melbourne

Post Posted: Tue Nov 25, 2008 1:40 am 
Reply with quote Top  
mmmm....i have a second hand lockright with sidegears sittin in the shed.....

_________________
builder of custom road legal zooks......and stuff.

 Profile  

Offline
az supporter
az supporter
User avatar

Joined: Mon Jul 21, 2008 11:30 pm
Posts: 1785
Location: perth, WA
Vehicle: 85' LWB Sierra, 01' S15

Post Posted: Tue Nov 25, 2008 6:43 am 
Reply with quote Top  
anyone have some 6.5 gears they want to sell? new or used.

_________________
79' LJ80 (sold) :(
95' & 97' sierra (sold)

 Profile  

Offline
User avatar

Joined: Thu Mar 29, 2007 11:30 pm
Posts: 14498
Location: Here there everywhere
Vehicle: A manly awesome man jimny

Post Posted: Tue Nov 25, 2008 1:39 pm 
Reply with quote Top  
lump_a_charcoal wrote:
Got a lockrite you wanna sell?

I got my crawler gears when the dollar was good, so i did alright...


sorry mate all sold.

 Profile  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 25 posts ] 

Jump to:  


Who is online

Users browsing this forum: No registered users and 349 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum
Untitled Document


Untitled Document


Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group :: Style based on FI Subice by phpBBservice.nl :: All times are UTC + 9:30 hours