| Author |
Message |
justin.w

az supporter
Joined: Wed Aug 31, 2011 11:43 am Posts: 31 Location: newcastle nsw
|
 Posted: Sat Sep 03, 2011 6:58 am |
|
|
After a jolly old bash on the beach the other day, stopped the vit to get out and have a chat, then went back in and all of a sudden the gear stick went completley sloppy, still selects gears fine and all.
After a bit of searching on here i pulled it apart and found the boot had cracked and let in a head of sand and water. The spring, bolts and ball seemed in good condition, so i cleaned them up and put it all back together, after draining the water and adding grease.
Trouble is, its still exactly the same.
Everything in that picture was there and cleaned and greased.
Dad put it down to a worn ball on it, but it seems odd that that would give up all of a sudden?
Help would be appreciated greatly!
You do not have the required permissions to view the files attached to this post.
|
|
|
|
 |
stocker
Joined: Wed Dec 08, 2010 7:16 am Posts: 941 Location: Shidoni!
|
 Posted: Sat Sep 03, 2011 7:36 am |
|
you haven't just got it in neutral 
_________________ Stocker
|
|
|
|
 |
alex

az supporter
Joined: Sat Aug 16, 2008 11:30 pm Posts: 2151 Location: Brissy
Vehicle: Nissan
|
 Posted: Sat Sep 03, 2011 7:41 am |
|
|
|
 |
swifty_ano
Joined: Tue Jun 29, 2010 4:17 am Posts: 1664 Location: Brisbane, QLD
|
 Posted: Sat Sep 03, 2011 7:48 am |
|
|
Does this rubber go in the box or the end of the gear stick.
Mines very sloppy also. I figured it was normal
|
|
|
|
 |
alex

az supporter
Joined: Sat Aug 16, 2008 11:30 pm Posts: 2151 Location: Brissy
Vehicle: Nissan
|
 Posted: Sat Sep 03, 2011 8:02 am |
|
|
|
 |
justin.w

az supporter
Joined: Wed Aug 31, 2011 11:43 am Posts: 31 Location: newcastle nsw
|
 Posted: Sat Sep 03, 2011 8:32 am |
|
|
Cheers for the replies guys.
Does the smaller bush go over the end ball, because that would explain things.
The thing had sand in it cause of the cracked boot so that may had done it.
|
|
|
|
 |
bailey08
Joined: Fri Oct 23, 2009 10:30 pm Posts: 257 Location: Brisbane North
Vehicle: 02 GV
|
 Posted: Sun Sep 04, 2011 6:03 am |
|
|
that plastic bush is called a sheet and can be bought from suzuki for about $12 from memory.
|
|
|
|
 |
justin.w

az supporter
Joined: Wed Aug 31, 2011 11:43 am Posts: 31 Location: newcastle nsw
|
 Posted: Sun Sep 04, 2011 9:03 am |
|
|
I rang the turds and they said the gearstick is sold as one whole piece. Woudlnt you have to cut it to replace the bushes but?
|
|
|
|
 |
Bruce

az supporter
Joined: Sun Jun 11, 2006 11:30 pm Posts: 4003 Location: Brisbane
|
 Posted: Sun Sep 04, 2011 9:11 am |
|
bailey08 wrote: that plastic bush is called a sheet and can be bought from suzuki for about $12 from memory.
Yep and I make and sell them for $5.00 + postage 
_________________ [quote="royce"] I wouldnt mind insulating my rear
|
|
|
|
 |
justin.w

az supporter
Joined: Wed Aug 31, 2011 11:43 am Posts: 31 Location: newcastle nsw
|
 Posted: Sun Sep 04, 2011 9:35 am |
|
|
Bruce/bailey is that the bush that usually fails making them sloppy? if so i wanna buy one.
|
|
|
|
 |
Bruce

az supporter
Joined: Sun Jun 11, 2006 11:30 pm Posts: 4003 Location: Brisbane
|
 Posted: Sun Sep 04, 2011 9:40 am |
|
|
Or it could be the Special bolt. 99% of the time on a Sierra it's the bush.
_________________ [quote="royce"] I wouldnt mind insulating my rear
|
|
|
|
 |
alex

az supporter
Joined: Sat Aug 16, 2008 11:30 pm Posts: 2151 Location: Brissy
Vehicle: Nissan
|
 Posted: Sun Sep 04, 2011 9:41 am |
|
Bruce wrote: bailey08 wrote: that plastic bush is called a sheet and can be bought from suzuki for about $12 from memory. Yep and I make and sell them for $5.00 + postage 
sorry Bruce i forgot you make them 
_________________ Pearce-toff Racing
|
|
|
|
 |
Bruce

az supporter
Joined: Sun Jun 11, 2006 11:30 pm Posts: 4003 Location: Brisbane
|
 Posted: Sun Sep 04, 2011 9:44 am |
|
alex wrote: Bruce wrote: bailey08 wrote: that plastic bush is called a sheet and can be bought from suzuki for about $12 from memory. Yep and I make and sell them for $5.00 + postage  sorry Bruce i forgot you make them 
No worries mate. It's not the $5 I need but happy to help AZ guys out if I can save them some coin 
_________________ [quote="royce"] I wouldnt mind insulating my rear
|
|
|
|
 |
|