auszookers.com • View topic - New Springs, but Vitara is on a lean....

Board index » Talking About Stuff » Suzuki Talk

New Springs, but Vitara is on a lean....

Page 1 of 1

[ 10 posts ]

Print view

Previous topic | Next topic

Author

Message

Philbilly

Joined: Wed May 11, 2011 11:41 pm
Posts: 84
Location: SWR

Posted: Fri Sep 16, 2011 2:49 am

I just put a set of King Springs in my Vitara, hoping they would lift it a tad (which they did nicely), and correct the slight drop in height on the rear drivers side. Whilst the car is now 40 mm higher all-round, the rear drivers side is still hanging around 50 mm lower than the opposite side.

Now, I assume I need some new rear shocks right? And if so, can anyone recommend some cheap ones that will bolt straight in??

Cheers,

Phil

monley

az supporter

Joined: Wed Nov 24, 2010 7:58 am
Posts: 11092
Location: Mandurah.W.A.
Vehicle: 84 LWB NT

Posted: Fri Sep 16, 2011 2:58 am

Are the rear springs the same lenght? Also check your tyre pressures are the same. I had a 30mm lean and 20mm of that lean was from one tyre been on 7psi :lol:

_________________
Tell my arse, he actually gives a crap!

atari4x4

az supporter

Joined: Mon Dec 11, 2006 10:30 pm
Posts: 34842
Location: East Radelayed
Vehicle: SV420+SV620 Vitara's

Posted: Fri Sep 16, 2011 3:02 am

shocks wont effect ride height unless they're that short they are at full extension on level ground.

_________________
You're just hating because you don't understand

31zook

Joined: Tue Mar 24, 2009 10:30 pm
Posts: 9242
Location: maito
Vehicle: <3 Edna <3

Posted: Fri Sep 16, 2011 3:17 am

Did you check the springs tag for drivers side and passengers side? Start looking at the car not suspension if the same lean still exists....

banga

Joined: Tue Nov 17, 2009 10:30 pm
Posts: 668
Location: sunshine coast

Posted: Fri Sep 16, 2011 4:30 am

they dont have a tag on the kings springs they are the same length mine was slightly lower on drivers side as well even with the calmini in it sits slightly lower on the drivers side but it is only 10mm on mine so i haven't worried about it.

you shouldn't measure from the ground you should measure from the hub or lip on the rim.

_________________
lseries 2" body lift king springs 27" boots and a

Philbilly

Joined: Wed May 11, 2011 11:41 pm
Posts: 84
Location: SWR

Posted: Fri Sep 16, 2011 5:02 am

As usual, awsome info given!

Just went out and parked on flat concrete, noticed instantly the right rear side was only down 10 mm- then got out the tyre gauge and seen it was 18 psi, and the other side was 28 psi. So problem solved when I crank a bit of air back in it :wink:

Thanks again.

monley

az supporter

Joined: Wed Nov 24, 2010 7:58 am
Posts: 11092
Location: Mandurah.W.A.
Vehicle: 84 LWB NT

Posted: Fri Sep 16, 2011 7:58 am

Philbilly wrote:

As usual, awsome info given!

Thanks again.

Those bloody low tyres are a pain in the arse :lol:

_________________
Tell my arse, he actually gives a crap!

ajsr

az supporter

Joined: Sun Dec 28, 2008 10:30 pm
Posts: 3712
Location: melb

Posted: Fri Sep 16, 2011 8:10 am

Philbilly wrote:

your too fat :wink:

sogone

az supporter

Joined: Mon Oct 25, 2010 11:29 am
Posts: 2070
Location: Darwin

Posted: Fri Sep 16, 2011 10:03 am

hahahahahaahaha.

Philbilly

Joined: Wed May 11, 2011 11:41 pm
Posts: 84
Location: SWR

Posted: Fri Sep 16, 2011 1:42 pm

"your too fat :wink:

[/quote]

Lol, :lol:

I weight like 78 kgs. I'm blaming the dodgy servo air pressure gauges

Page 1 of 1

[ 10 posts ]

Board index » Talking About Stuff » Suzuki Talk

Who is online

Users browsing this forum: Google [Bot] and 64 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum