[Damo]

This is a split topic. The post you are reading refers to this post

You might not have enough belt wrap around the A/C pulley, it's prolly gonna slip on that under load. You might be able to put a little idler in between the A/C pump and the P/S pump if you have problems.

[jimbo_jones]

Damo wrote:

You might not have enough belt wrap around the A/C pulley, it's prolly gonna slip on that under load. You might be able to put a little idler in between the A/C pump and the P/S pump if you have problems.

thanks damo its a work in progress if it needs it I'll put one in

[Damo]

jimbo_jones wrote:

Damo wrote:

You might not have enough belt wrap around the A/C pulley, it's prolly gonna slip on that under load. You might be able to put a little idler in between the A/C pump and the P/S pump if you have problems.

thanks damo its a work in progress if it needs it I'll put one in

Aren't they all

Do you still want those shock towers? I PM'd you but the msg hasn't left my outbox yet. I got the towers boxed up ready to go.

[Hybrid]

Yeah the crank and power steer pulleys look ok but that AC compressor hasn't got anywhere near enough arc of contact. I think I have a link here on how to calculate how much you need if you want it. I found it when I was having the same supercharger dilemmas

[Hybrid]

Here it is anyway http://www.bacharach-training.com/norm/arc.htm