It is currently Sat Jul 18, 2026 2:11 am
Board index » Shift It And Find It » Getting rid of stuff



Post new topic Reply to topic  [ 10 posts ] 
Author Message

Offline
User avatar

Joined: Sun Jul 06, 2008 11:30 pm
Posts: 29
Location: Toowong Briz

Post Posted: Wed Sep 21, 2011 10:25 am 
Reply with quote Top  
as above. LWB ute for sale. I was going to to chop the blue SWB tub into an extra cab, but no time and nowhere to do the work.

1987 LWB ute
1.3 manual
wide track diffs
2" lifted springs
rear ARB locker
rear disc brake conversion
steel tray (including drop sides)
bullbar with spotties
sidesteps/brushbars (need some restoration)
Momo steering wheel
235x75x15R tyres on good offset rims (2 tyres near new)

Comes with spares:
Subaru brake master cylinder
aftermarket sports seats (from Swift) mounted to adapter rails
extended front shock hoops (supplied loose - not welded to chassis)
inboard rear shock mounts (supplied loose - not welded to chassis)
longer shocks
standard springs
extra front bar with indicators
SWB tub that I was going to chop and put onto the ute chassis (that's why the doors and front clip are blue) - includes dashboard
2" body lift kit
pair of doors with minor rust (was going to make into half doors)
factory Suzuki 2 piece hardtop with most accessories (missing one gas strut)
aluminium drop sides from hilux (not in photos)
spare front brake calipers
few other bits and pieces that I can't think of

The bad:
the cab has rust in the floor and some in the sills (body straight and glass is good)
last time I drove it one of the rear brakes was dragging
not started for a little while so may not be running cleanly but was running well last time I drove it around the backyard
clutch throwout bearing needs attention
some minor oil leaks
only one standard ute seat (which was chewed by the dog)

Not registered and no RWC.

If there is no interest I will consider splitting the ute up, but I'd much prefer selling as a complete package. The lucky buyer can then split if they wish.

Price: $2600 for the lot
Location: Toowong 4066

Contact Charlie on email (cabrown70@hotmail.com) or on 0401 026 089.

I'm in the process of moving so I won't have a lot of time during the week, but can make time on the weekend/s.

Please note that the pink bike in the pictures is not included! If there are photos of tools etc these are not included either


You do not have the required permissions to view the files attached to this post.

 Profile  

Offline
az supporter
az supporter
User avatar

Joined: Wed Nov 24, 2010 7:58 am
Posts: 11092
Location: Mandurah.W.A.
Vehicle: 84 LWB NT

Post Posted: Wed Sep 21, 2011 12:42 pm 
Reply with quote Top  
Shit!!! Why can't you be in W.A. :(

If you part out i would be keen on the the rear locker ( RD88 i assume?).

_________________
Tell my arse, he actually gives a crap!

 Profile  

Offline
User avatar

Joined: Mon Apr 18, 2011 9:19 pm
Posts: 134
Location: Gold Coast

Post Posted: Wed Sep 21, 2011 9:07 pm 
Reply with quote Top  
Pm me if u want to move on the momo wheel... I'm sure u could sell it without loosing overall price on the car ;)

_________________
The Green Machine!

 Profile  

Offline
User avatar

Joined: Tue Nov 09, 2010 9:31 am
Posts: 499
Location: Ipswich
Vehicle: Sierra Ute '87 Sj70

Post Posted: Wed Sep 21, 2011 11:43 pm 
Reply with quote Top  
charlie_brown wrote:
extended front shock hoops (supplied loose - not welded to chassis)
inboard rear shock mounts (supplied loose - not welded to chassis)


hey mate what shocks are these intended to run?

_________________
It's all coming together Armsup

 Profile WWW  

Offline

Joined: Mon Mar 03, 2008 10:30 pm
Posts: 313
Location: ipswich
Vehicle: 30s front locker barwork

Post Posted: Thu Sep 22, 2011 4:19 am 
Reply with quote Top  
Hav u got any pics of how bad the rust is

 Profile  

Offline
User avatar

Joined: Sun Jul 06, 2008 11:30 pm
Posts: 29
Location: Toowong Briz

Post Posted: Fri Sep 23, 2011 8:45 pm 
Reply with quote Top  
the shocks are TJM from memory. I can't confirm from the photos.

I'll get some photos of the rust posted today/tomorrow.

 Profile  

Offline
az supporter
az supporter
User avatar

Joined: Thu Apr 07, 2011 8:21 pm
Posts: 265
Location: Baldhills
Vehicle: 02 jimny

Post Posted: Sat Sep 24, 2011 12:05 am 
Reply with quote Top  
I'll take the locker and bits if end up parting out

_________________
LIVING LIFE ON THE EDGE, TILL YA ROLL

 Profile  

Offline
az supporter
az supporter
User avatar

Joined: Thu Apr 07, 2011 8:21 pm
Posts: 265
Location: Baldhills
Vehicle: 02 jimny

Post Posted: Sat Sep 24, 2011 12:06 am 
Reply with quote Top  
Would the cab fit on a swb soft chassis

_________________
LIVING LIFE ON THE EDGE, TILL YA ROLL

 Profile  

Offline
User avatar

Joined: Tue Nov 09, 2010 9:31 am
Posts: 499
Location: Ipswich
Vehicle: Sierra Ute '87 Sj70

Post Posted: Sun Sep 25, 2011 12:28 pm 
Reply with quote Top  
charlie_brown wrote:
the shocks are TJM from memory. I can't confirm from the photos.

I'll get some photos of the rust posted today/tomorrow.


i meant how much longer?

_________________
It's all coming together Armsup

 Profile WWW  

Offline
User avatar

Joined: Tue Nov 09, 2010 9:31 am
Posts: 499
Location: Ipswich
Vehicle: Sierra Ute '87 Sj70

Post Posted: Sun Sep 25, 2011 12:28 pm 
Reply with quote Top  
charlie_brown wrote:
the shocks are TJM from memory. I can't confirm from the photos.

I'll get some photos of the rust posted today/tomorrow.


i meant how much longer?

_________________
It's all coming together Armsup

 Profile WWW  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 10 posts ] 

Jump to:  


Who is online

Users browsing this forum: No registered users and 29 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum
Untitled Document


Untitled Document


Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group :: Style based on FI Subice by phpBBservice.nl :: All times are UTC + 9:30 hours