auszookers.com • View topic - Road tyre pressure

Board index » Talking About Stuff » Suzuki Talk

Road tyre pressure

Page 1 of 1

[ 12 posts ]

Print view

Previous topic | Next topic

Author

Message

tobeszook

az supporter

Joined: Sun Sep 26, 2010 7:38 am
Posts: 453
Location: Drysdale Vic

Posted: Sat Oct 15, 2011 10:31 am

Ive got 30"9.5 maxis buckshots on my coily just wondering what pressure you guys run on the black stuff?

Rusho

Tubby Elfsdong

Joined: Sun Aug 02, 2009 11:30 pm
Posts: 6501
Location: Northside, Brisbane
Vehicle: Coily Sierra

Posted: Sat Oct 15, 2011 10:33 am

22-24 psi

_________________
Shep is a closet jimny lover!!!!

tobeszook

az supporter

Joined: Sun Sep 26, 2010 7:38 am
Posts: 453
Location: Drysdale Vic

Posted: Sat Oct 15, 2011 10:37 am

Is that it ? I just got them fitted and haven't checked what the put in the .
I would have put 30+psi in them if I hadn't of asked

SierraDan

az supporter

Joined: Fri Feb 04, 2011 10:55 pm
Posts: 9348
Location: Newcastle
Vehicle: G13BB Jimny

Posted: Sat Oct 15, 2011 10:38 am

25 psi front and 30 psi rear cos of the locker.

_________________
mlm

christover1

az supporter

Joined: Tue Jul 15, 2008 11:30 pm
Posts: 8203
Location: Melbourne
Vehicle: Pajero 91 NH 3.0 SWB

Posted: Sat Oct 15, 2011 10:55 am

I go higher when tyres are newly fitted, makes sure they seated in well, less chance of rolling off rim off road..then go down to right pressure after a week or so.
Thats my theory, could be rubbish, but works for me

With 31's on 7"rims my Vit is usually at 24 - 26psi on road

_________________
VIC ZOOK CLUB
http://www.vic.suzuki4wd.com/forum/

tobeszook

az supporter

Joined: Sun Sep 26, 2010 7:38 am
Posts: 453
Location: Drysdale Vic

Posted: Sat Oct 15, 2011 10:57 am

Thanks boys

alien

Joined: Wed Mar 24, 2010 10:30 pm
Posts: 16343
Location: Perth
Vehicle: '92 Sierra, 1.6efi, SPOA, 31s.

Posted: Sat Oct 15, 2011 12:00 pm

i run my 31s at 26psi front and 22 rear...

lots of USA folks run theirs super low at first to "soften" them up... sounds dangerous to me, lol

just let them down till you get a good contact patch on the road (can test with talcom powder or water on the driveway). then go for a highway run and when you get home the pressure should have gone up around 4psi (give or take a bit). if its up more then you're too low.

_________________

Jackson

Joined: Mon Apr 04, 2011 5:56 am
Posts: 559
Location: Newcastle
Vehicle: Yellow Ute

Posted: Sat Oct 15, 2011 7:34 pm

Why do you guys run them that low?

Scrawny

I live here!

Joined: Tue Jan 29, 2008 10:30 pm
Posts: 10528
Location: Brissie
Vehicle: Popemobile

Posted: Sat Oct 15, 2011 7:40 pm

You dont need any more when the car only weighs 1000kgs. That's also what the tyre placard says

royce

omnipotent being

Joined: Sun Jun 11, 2006 11:30 pm
Posts: 17216
Location: Pluto

Posted: Sat Oct 15, 2011 7:48 pm

Jackson wrote:

Why do you guys run them that low?

At maximum pressure a single 4wd style tyre is usually rated to carry a load equal to or higher than the whole car, so to make them work with 25% of the load they are required to support you need to lower the pressure

hutch

az supporter

Joined: Sun Nov 30, 2008 10:30 pm
Posts: 1213
Location: SW Bris

Posted: Sat Oct 15, 2011 7:49 pm

Jackson wrote:

Why do you guys run them that low?

saves money at the chiropractor!

_________________
255 characters

harvs

az supporter

Joined: Sun Aug 07, 2011 10:31 am
Posts: 192
Location: Newcastle

Posted: Sun Oct 16, 2011 12:18 am

alien wrote:

+1 - the 4 psi rule works a treat in my opinion.

Page 1 of 1

[ 12 posts ]

Board index » Talking About Stuff » Suzuki Talk

Who is online

Users browsing this forum: Brenno and 315 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum