auszookers.com • View topic

Board index » Talking About Stuff » Suzuki Talk

g16b timing

Page 1 of 1

[ 10 posts ]

Print view

Previous topic | Next topic

Author

Message

4x4zook

Joined: Wed Jun 15, 2011 2:25 am
Posts: 151
Location: australia port augus

Posted: Thu Oct 20, 2011 5:22 am

hey guys got a 97 g16b in my sierra. now i took it to my local mechanic to get it tuned after the motor was wired up. he set my timing to 2deg. i seem to remember reading somewere that it should be at 8 deg but i cant turn the dizzy anymre as its at its limit. so do i pull the dizzy out and try and get it to 8deg or leave it were he set it?

Drova

Joined: Mon Aug 01, 2011 2:48 am
Posts: 167
Location: Perth
Vehicle: 85 hightop drover

Posted: Thu Oct 20, 2011 5:45 am

Stock timing is 5deg -+1deg

_________________
16valve efi hightop drover

JrZook

Joined: Tue Aug 08, 2006 11:30 pm
Posts: 5517
Location: Holland Park
Vehicle: Awesome!!

Posted: Thu Oct 20, 2011 6:05 am

Pull the dizzy out and move it a few teeth over so you are in the middle of the adjustment again.

FSM says 5*BTDC base timing with the diagnostic plug bridged. I've just set mine till she starts to ping and brought her back a few degrees.

Dan

_________________
Lil Foot!
http://tiny.cc/gtsw1

steak_knife

az supporter

Joined: Fri May 22, 2009 11:30 pm
Posts: 21335
Location: Smart Ass Island

Posted: Thu Oct 20, 2011 6:24 am

JrZook wrote:

Pull the dizzy out and move it a few teeth over so you are in the middle of the adjustment again.

FSM says 5*BTDC base timing with the diagnostic plug bridged. I've just set mine till she starts to ping and brought her back a few degrees.

Dan

Work's a treat!!!

_________________
I used to be indecisive,
now I'm not so sure.....

4x4zook

Joined: Wed Jun 15, 2011 2:25 am
Posts: 151
Location: australia port augus

Posted: Thu Oct 20, 2011 6:36 am

pulled the dizzy out a million times adjusting it but i still cant get it to 5deg. the closest i can get is 2 and 11.... might just get a round file and file a bit out of the dizzy so i can turn that tiny bit more..

Scrawny

I live here!

Joined: Tue Jan 29, 2008 10:30 pm
Posts: 10528
Location: Brissie
Vehicle: Popemobile

Posted: Thu Oct 20, 2011 6:43 am

Something not right then. You should be able to get 8-10 in the middle of the adjustment

4x4zook

Joined: Wed Jun 15, 2011 2:25 am
Posts: 151
Location: australia port augus

Posted: Thu Oct 20, 2011 6:57 am

what could be wrong? like i said iv pulled it out a million times but everytimei do i haveto turn it to the full adjustment to get 2 or 11

4x4zook

Joined: Wed Jun 15, 2011 2:25 am
Posts: 151
Location: australia port augus

Posted: Thu Oct 20, 2011 6:58 am

i rekon the mechanic must ov had the same problem so he just left it at 2deg. would filling the adjustment out a tiny bit work or not a good idea, theres a fair bit of meat on the sides.

royce

omnipotent being

Joined: Sun Jun 11, 2006 11:30 pm
Posts: 17216
Location: Pluto

Posted: Thu Oct 20, 2011 6:59 am

be gentler and pull it slowly till its jsut holding and youll feel it move over a single tooth

4x4zook

Joined: Wed Jun 15, 2011 2:25 am
Posts: 151
Location: australia port augus

Posted: Thu Oct 20, 2011 7:35 am

i can feel it moving 1 tooth and still either wont start or be way way advanced

Page 1 of 1

[ 10 posts ]

Board index » Talking About Stuff » Suzuki Talk

Who is online

Users browsing this forum: Google [Bot] and 34 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum