auszookers.com • View topic - Transfer cradle??

Board index » Talking About Stuff » Suzuki Talk

Transfer cradle??

Page 1 of 1

[ 10 posts ]

Print view

Previous topic | Next topic

Author

Message

ZookZilla96

az supporter

Joined: Mon May 24, 2010 8:58 am
Posts: 229
Location: Noosa Sunshine Coast

Posted: Wed Oct 26, 2011 11:41 am

Hey guys,

I know there is probably a few posts already about this but I'm not the best with computers to find them, so i thought I'd just put the question out there again. What is the best cradle set up for the transfer? Will be putting 6.5:1 gears in at the same time. Have had a look on low range and there is a few on there but thought I might ask of your opinions.

Cheers
Fletcher

_________________
Suncoast Exhaust & Mechanical,Noosa,QLD. All Mecha

Junior_91

Joined: Tue Mar 17, 2009 10:30 pm
Posts: 1084
Location: Ipswich

Posted: Wed Oct 26, 2011 11:45 am

I am personally running a might kong one and it has been a great thing fro me. Still retains factory mounts and also can act as a skid plate and stop you smashing the case.

_________________
TWIN LOCK IT & JUST DRIVE!

Master_Butcher

Joined: Fri Oct 21, 2011 6:36 pm
Posts: 24
Location: Gold Coast

Posted: Wed Oct 26, 2011 5:53 pm

i just bought 6.5s for my sierra and i also ordered the mighty kong at the same time.

607CHA

az supporter

Joined: Thu Apr 07, 2011 8:21 pm
Posts: 265
Location: Baldhills
Vehicle: 02 jimny

Posted: Wed Oct 26, 2011 6:00 pm

Sean from low range told me that in a few weeks they will have a new cradle on the market. apparently it will be stronger and better than the mighty Kong and it will be able to be post in the $65 package. so that what ill be waiting for.

_________________
LIVING LIFE ON THE EDGE, TILL YA ROLL

ZookZilla96

az supporter

Joined: Mon May 24, 2010 8:58 am
Posts: 229
Location: Noosa Sunshine Coast

Posted: Thu Oct 27, 2011 10:33 am

Cheers for the replies guys, I'm probably getting mine in 3 weeks so I might look out for this new one. Has anyone bought the big orange cradles? They look pretty insane.

_________________
Suncoast Exhaust & Mechanical,Noosa,QLD. All Mecha

shep

Joined: Thu Mar 29, 2007 11:30 pm
Posts: 14498
Location: Here there everywhere
Vehicle: A manly awesome man jimny

Posted: Thu Oct 27, 2011 10:47 am

i am waiting for benT to build me one

_________________
JEEPJEEPJEEPJEEPJEEPJEEPJEEPJEEPJEEP

just_cruizin

az supporter

Joined: Sun Jun 25, 2006 11:30 pm
Posts: 2867
Location: here

Posted: Thu Oct 27, 2011 11:08 pm

Personally I run a roc7oy ring to hold the case together, lifted case and will be fitting a flat bash plate across the chassis rails. Once you start fitting gears the mounts are under enough stress let alone hitting rocks with the weight of the vehicle coming down on them.

_________________

greenzook89 wrote:

31zook wrote:

Makes me want something similar

BlueSuzy

az supporter

Joined: Sun May 04, 2008 11:30 pm
Posts: 9716
Location: NSW
Vehicle: SJ51 LWB, SJ70 SWB

Posted: Thu Oct 27, 2011 11:14 pm

My swb i just ran a roctoy ring welded into the original but strengthened mounts. Never had a problem with 1.6, 6.5's 32" and original diff ratios.. Used to thrash it too.

My new one will be similar to just_cruizin

_________________

BlueSuzy wrote:

I'm over the G16b's.

suzukikid

Joined: Sun Jan 14, 2007 10:30 pm
Posts: 2803
Location: Melton Victoria!

Posted: Fri Oct 28, 2011 9:55 am

just_cruizin wrote:

Thats what i run.....lifted and roctoy.....in my old one i ran nothin at all....bent mounts all over the joint!

_________________
back in a built sierra!

HBWC

Joined: Wed Oct 19, 2011 2:44 pm
Posts: 8
Location: orelia wa

Posted: Fri Oct 28, 2011 3:09 pm

will the rock toy ring fit the 1lt case?

Page 1 of 1

[ 10 posts ]

Board index » Talking About Stuff » Suzuki Talk

Who is online

Users browsing this forum: Google [Bot], KeVl@r and 350 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum