[Glider]

Can anyone tell me how to remove the rear brake drums on my '94 Sierra? I have the Haynes manual but it just says to release the handbrake, spring & remove a clip from the mechanism. Should I undo the four inner nuts? There are also 2 or 3 philips head screws (frozen) on the outer diameter. The drum revolves easily. Sorry for what may be a silly question.

Mick

[zukmeista]

No such thing as a silly question. Undo the four nuts in the center, will help if you put the handbrake on to do this, then release the handbrake and it should come off. If it doesn't, put the wheel back on and hit the back of the wheel with a hammer.

[Glider]

Thanks Zukmeista!

Mick

[zukmeista]

Happy to help.

[steak_knife]

Or hit the drum with a hammer.... in between the wheel stud's....
save's having a wheel & tyre flying/bouncing round the place....

[brookesy]

or dodgy up a bit o' wood...