[the-ninja-kid]

looking at possibly parting out, or selling my sv420.

not sure what parts will be worth.
custom bar work am also unsure of what theyd be worth.

has front winch crade and bar
steele rear bar
rock sliders
3" lift (dobinson springs, unsure of shock and strut brands, was form ODA but there not his standard ones he uses, passenger side front strutt is slightly bent)
front airlocker
towbar
underbody protection, including TSOR fuel tank guard.

standard wheels with Kuhmo KL71's near new ben to one trip to cruiser park and driven to mt isa and back, plus brand new spare.

has like a million k's on the motor but motor is good and strong, 5speed manual, shifts well, transfercase is good. loads of other things I guess, including larger radiator from a GV and new TPS. photos in my other threads but will get some here also.

not sure what parts are worth, if your interested in parts PM me with a serious offer. theres near 20 grand of aftermarket parts ive had to buy/ are fitted to/for this car.

[the-ninja-kid]

see damage and stuff here --> http://auszookers.com/index.php?name=Fo ... ic&t=26653

photos before the "incident"

http://auszookers.com/index.php?name=Fo ... ugh+tourer

[atari4x4]

pics of the towbar set up & price

[tanshi]

price on air locker!?!

[Friski]

I'm interested in the lockers, only at the right price ofcourse.

Let me know how it goes.

Cheers,
Mic

[the-ninja-kid]

atari4x4 wrote:

pics of the towbar set up & price

will get them up ASAP (only have iphone on me *sigh* android phone away on insurance )

only has front locker not rear.

make an offer.

[tanshi]

[quote="the-ninja-kid]
only has front locker not rear.

make an offer.[/quote]

$700

[atari4x4]

good to see ODA used quality bolts on your rear bar.

was hoping it was a receiver hitch type towbar

[the-ninja-kid]

atari4x4 wrote:

good to see ODA used quality bolts on your rear bar.

was hoping it was a receiver hitch type towbar

yeah, wasnt overly impressed with anything he did. . .

sorry stnadard type

[the-ninja-kid]

tanshi wrote:

[quote="the-ninja-kid]
only has front locker not rear.

make an offer.

$700[/quote]

need to have enough interest in all parts to get a "total amount" before I start parting it out. will keep your offer in mind, but for a locker thats been used about 3 to 4 times on one outing to cruiser park i think ill be chasing a bit more for it if i do part it out.

[tanshi]

up to you. im only after the centre so the ring and pinion / housing etc would just get binned any way

[ninjamoses]

Not sure if it has either, but I'd be interested in your front diff steel housing (dont need the 3rd member) and the complete aircon set up.

Thats if you installed a steel front diff and if the car had aircon anyway....

[the-ninja-kid]

ninjamoses wrote:

Not sure if it has either, but I'd be interested in your front diff steel housing (dont need the 3rd member) and the complete aircon set up.

Thats if you installed a steel front diff and if the car had aircon anyway....

nope alloy still, and i think all sv's have aircon? as this is the povo pack and has aircon. . .

[gvzookdriver]

EFI fuel tank? price ?? I don't know what these are worth

[ninjamoses]

I can safely say that aircon wasnt standard unfortunately.

Depending on what you are chasing for it, I'd be keen for the *complete* system anyway (from the compressor all the way through to the switch on the dash).

Possibly interested in the dobinson springs and TSOR fuel tank guard also.

[dion93]

you parting with the engine, computer/ecu and loom? if so how much you chasing?

[the-ninja-kid]

gvzookdriver wrote:

EFI fuel tank? price ?? I don't know what these are worth

nor am I, Pm me an offer, still collating all the offer to see what i can get if i start parting it out, not looking terribly convincing so far. .

dion93 wrote:

you parting with the engine, computer/ecu and loom? if so how much you chasing?

Not sure what its worth, you would have to make an offer.

[steak_knife]

gvzookdriver wrote:

EFI fuel tank? price ?? I don't know what these are worth

To wide....

[steak_knife]

I'm temped to say "swap ya for a jimny", but not going to....

[dion93]

disregard my PM, not what im after sorry.

[gvzookdriver]

steak_knife wrote:

gvzookdriver wrote:

EFI fuel tank? price ?? I don't know what these are worth

To wide....

[Artermist]

How much for the tyres? and the front bar.

[the-ninja-kid]

Artermist wrote:

How much for the tyres? and the front bar.

PM me an offer, if you read the last few lines of the post you will see that's what ive asked for

[atari4x4]

did the headlights survive?

[the-ninja-kid]

atari4x4 wrote:

did the headlights survive?

sure dide. only damage is the drivers front fender, drivers dor, and the rear at the top of the rear window. oh and a dent jsut infront of the drivers side rear wheel. well that and the passsenger side strutt is slightly bent but works finne, nothing the set of camber bolts I have for the car wont corrrect as far as camber goes.

[the-ninja-kid]

Okay so an update,
The first parts I am going to sell off are as follows with prices, all are "ONO" but please PM me the offer, so post here then PM me your offer.

Front bar: $1000.00 ono, includes bull bar and winch cradle, the cradle will fit any standard 9000lb winch (so most likely will fit a 12000lb aswell but not certain) fairhead no included as it will stay with my winch. the bar bolts to the cradle and the cradle bolts to the chassis. all bolts will be supplied. all made by ODA

Rear Bar: $800.00 ono (advise viewing first) bar mounts to towbar mounting points and via holes that will need to be drilled and tapped on the rear of the car (hence why advise viewing first) not sure if there is any other mounting as I did not fit or design the bar, this was all doen by ODA.

Rock Sliders: $600.00 ono theese are for the sv420 and do not think they will fit a 1.6 but are welcom to come view them and see for yourself, they mount to the chassis but a "U" section and bolts over the top (no drilling of the chassis) theese are strong as anything and will definatley protect the sills of the car, but not th prettiest, the welds look a lil shitty but cant notice unless you look really close, theese are made by ODA also.

Undebody plates: $600.00 ono This includes TSOR fuel tank guard and ODA front skidplate, diff guard and transfercase guard, woudl advise viewing as i cna not say if this will fit a 1.6 or not either. verry strong its 3mm or thicker steel, and will protect the alloy front diff of the sv420.

3" "extreem lift" form ODA: $1200.00 or $1000.00ono when swapped with your factory suspension.
This kit includes 3: dobinson coils front and rear, also includes a second set of 3" dobinson front springs with 1mm thicked steel to handle added weight of a bar and winch, theese have never been fitted. has what i ma told are "FTS Extreem" front strutts, and 3" lifter extended travel rear shocks, this makes the rear move a huge amoun, travel shots can be seen in my rig thread. has diff dropp brackets and rear a arm spacer. can also include camber adjusting bolts if wanted. may be needed as suspected that front passenger strut is sightly bent but functiones just fine.

Theese are the only parts I will be selling to begin with as I will possible use money from the sale of theese items to repair the rest of the car, then use it as my daily driver.

please PM me all offers and post here that you have sent me a PM. I can try and get detailed photos of parts if needed but comming to view the parts would be my prefference. will not post items unless buyer organises freight and pays for freight ont he items and has agreed to the condition the item is in, and will do my best to get as detils as possible photos of every aspect of the item before shipping as I do not want to rip anyone off and do not want to have any issues with anyone, once bought its bought, no refunds or warranty on any item. will consider swapping parts for a LAMS approved motorbike, no other swaps are interested, can lower the price if a swap for the stock version of the item is part payment.

Thanks.

[steak_knife]

the-ninja-kid wrote:

Front bar: $1000.00 ono, includes bull bar and winch cradle, the cradle will fit any standard 9000lb winch (so most likely will fit a 12000lb aswell but not certain) fairhead no included as it will stay with my winch. the bar bolts to the cradle and the cradle bolts to the chassis. all bolts will be supplied. all made by ODA

As if.....

[the-ninja-kid]

steak_knife wrote:

the-ninja-kid wrote:

Front bar: $1000.00 ono, includes bull bar and winch cradle, the cradle will fit any standard 9000lb winch (so most likely will fit a 12000lb aswell but not certain) fairhead no included as it will stay with my winch. the bar bolts to the cradle and the cradle bolts to the chassis. all bolts will be supplied. all made by ODA

As if.....

as if meaning you think they weren't done by oda (or its subcontractors?) got receipts if you really need?

[steak_knife]

Made in Bali

[the-ninja-kid]

steak_knife wrote:

Made in Bali

custom made using my car actually. its a one of. . . got photos of it being made if you want?