auszookers.com • View topic - baleno motor questions

Board index » Talking About Stuff » Suzuki Talk

baleno motor questions

Page 1 of 1

[ 9 posts ]

Print view

Previous topic | Next topic

Author

Message

Mike

lesspostingmorewheeling

Joined: Tue May 06, 2008 11:30 pm
Posts: 2236
Location: Under Down Under

Posted: Wed Jan 07, 2009 3:48 am

i know this probably sounds stupid but is it possible to use a baleno bottom end with a 1.3 head?

also will a baleno motor work with a vitara ecu and vice versa?

Cheers
Mike

_________________
[quote="Fluffy"] yeah right mate like Im gunna mov

BlueSuzy

az supporter

Joined: Sun May 04, 2008 11:30 pm
Posts: 9716
Location: NSW
Vehicle: SJ51 LWB, SJ70 SWB

Posted: Wed Jan 07, 2009 3:59 am

Baleno efi g16b could possibly work with a efi jimny g13bb head/ or g13b twincam head. But why bother fooking around. $$$$$ + aftermarket ecu and testing....

Vitara motor is dizzy.
Old Baleno motor are dizzy
So maybe vit ecu will run both. But both have different wire colours etc.

But Baleno 97'on is coilpacks, So extra sensors to play with. So Baleno ecu only.

Its amazing how many "G" series motors there are out there!

_________________

BlueSuzy wrote:

I'm over the G16b's.

Mike

lesspostingmorewheeling

Joined: Tue May 06, 2008 11:30 pm
Posts: 2236
Location: Under Down Under

Posted: Wed Jan 07, 2009 4:04 am

i mean 1.3 8 valve head
i know it won't go aswell but i'm just wondering if it will actually fit/run

_________________
[quote="Fluffy"] yeah right mate like Im gunna mov

BlueSuzy

az supporter

Joined: Sun May 04, 2008 11:30 pm
Posts: 9716
Location: NSW
Vehicle: SJ51 LWB, SJ70 SWB

Posted: Wed Jan 07, 2009 4:07 am

Have heard of ppl putting g16b heads (16v) on g16a motors(8valve)
Have heard of ppl putting g13a heads (8v) on g16a motors(8valve)

If your going g16b, May as well use the whole system.

_________________

BlueSuzy wrote:

I'm over the G16b's.

Mike

lesspostingmorewheeling

Joined: Tue May 06, 2008 11:30 pm
Posts: 2236
Location: Under Down Under

Posted: Wed Jan 07, 2009 4:11 am

it would just be a temperary thing just to get it going

_________________
[quote="Fluffy"] yeah right mate like Im gunna mov

BlueSuzy

az supporter

Joined: Sun May 04, 2008 11:30 pm
Posts: 9716
Location: NSW
Vehicle: SJ51 LWB, SJ70 SWB

Posted: Wed Jan 07, 2009 4:14 am

Dont you have 2 zooks?

Drive 1. G16b the other. take ur time. Otherwise your doubling the work..

Makes no sense to me...

_________________

BlueSuzy wrote:

I'm over the G16b's.

Mike

lesspostingmorewheeling

Joined: Tue May 06, 2008 11:30 pm
Posts: 2236
Location: Under Down Under

Posted: Wed Jan 07, 2009 4:20 am

i have 1 and a quarter zooks now :roll:

i was thinking put the bottom end in with my original head then i can take my time with loom and that shit and still have a going zook

_________________
[quote="Fluffy"] yeah right mate like Im gunna mov

Taff

Joined: Sun Aug 13, 2006 11:30 pm
Posts: 889
Location: Brisbane

Posted: Wed Jan 07, 2009 5:17 am

and have to a head off three times? seems like way too much stuffing around

Damo

az supporter

Joined: Sat Jul 22, 2006 11:30 pm
Posts: 4661
Location: Brisbane

Posted: Wed Jan 07, 2009 5:30 pm

Mike wrote:

i mean 1.3 8 valve head
i know it won't go aswell but i'm just wondering if it will actually fit/run

Valve cutouts in the pistons are different between 8v and 16v models.

_________________
SJ50.4.LYF

Page 1 of 1

[ 9 posts ]

Board index » Talking About Stuff » Suzuki Talk

Who is online

Users browsing this forum: No registered users and 94 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum