auszookers.com • View topic - What's the easy way

Board index » Talking About Stuff » Suzuki Talk

What's the easy way

Page 1 of 1

[ 11 posts ]

Print view

Previous topic | Next topic

Author

Message

Daves4wd

az supporter

Joined: Fri Aug 26, 2011 3:17 pm
Posts: 1286
Location: Melbourne
Vehicle: Swb Sierra twin lock 32s 6.5s

Posted: Tue Nov 22, 2011 6:08 am

Eu guys and girls what's the easiest way to get the fly wheel bolts off?? Cheers also might add I can't get my hands on a rattle gun till tomorrow

ajsr

az supporter

Joined: Sun Dec 28, 2008 10:30 pm
Posts: 3712
Location: melb

Posted: Tue Nov 22, 2011 6:17 am

use some muscles you limp dick :roll:

they are not that tight

reeceh

az supporter

Joined: Thu Apr 29, 2010 8:45 am
Posts: 1230
Location: Brisbane
Vehicle: 91 sierra, g16b,lift,30's

Posted: Tue Nov 22, 2011 6:19 am

Jam a big screwdriver in the teeth to something else or even in the front pullys. Do it's wedged then use a breaker bar and try do a short hard burst instead of a constant pull. U wanna crack em loose so to speak!

christover1

az supporter

Joined: Tue Jul 15, 2008 11:30 pm
Posts: 8203
Location: Melbourne
Vehicle: Pajero 91 NH 3.0 SWB

Posted: Tue Nov 22, 2011 6:20 am

Is in or out of car?

You need a way to stop motor turning.
Spanner on crank pulley is one way.
And a decent socket with a very long bar.
Or a pole to slip over a short bar.

Watch ya knuckles,
fly wheel teeth bite.

_________________
VIC ZOOK CLUB
http://www.vic.suzuki4wd.com/forum/

christover1

az supporter

Joined: Tue Jul 15, 2008 11:30 pm
Posts: 8203
Location: Melbourne
Vehicle: Pajero 91 NH 3.0 SWB

Posted: Tue Nov 22, 2011 6:22 am

PS, on odd occassions, crank pulley comes loose instead

_________________
VIC ZOOK CLUB
http://www.vic.suzuki4wd.com/forum/

buzbox

Joined: Thu Jul 16, 2009 11:30 pm
Posts: 3600
Location: Wollongong NSW
Vehicle: LWB Sierra & XL7

Posted: Tue Nov 22, 2011 6:38 am

Easiest way, air impact wrench.

Otherwise use screw driver to jam it in the teeth and use a breaker bar.

_________________
'92 Vitara & Camper trailer

TZAR

az supporter

Joined: Tue Aug 01, 2006 11:30 pm
Posts: 3461
Location: licking some windows
Vehicle: LJ20 LJ50

Posted: Tue Nov 22, 2011 6:47 am

tyre lever jammed though starter motor hole and then undo.

rough way is to undo spark plug get on firing stroke (so valves are shut) make sure piston is as low as it will go and feed rope into the cylinder until you cant squeeze anymore in then use a breaker bar and kick it.

or you could use a square edged big screw driver or bit of flat steel and follow noob cad pic. Just loosen bolts using this method IE 1 and 2 then turn a bit anddo the next two. Best if you can just wedge it against chassis rail ground and give a kick

You do not have the required permissions to view the files attached to this post.

_________________
Camels have nice toes

Daves4wd

az supporter

Joined: Fri Aug 26, 2011 3:17 pm
Posts: 1286
Location: Melbourne
Vehicle: Swb Sierra twin lock 32s 6.5s

Posted: Tue Nov 22, 2011 6:55 am

reeceh wrote:

Thanks for that buddy all good now to do The one that's a bare block hahaha

Daves4wd

az supporter

Joined: Fri Aug 26, 2011 3:17 pm
Posts: 1286
Location: Melbourne
Vehicle: Swb Sierra twin lock 32s 6.5s

Posted: Tue Nov 22, 2011 6:58 am

The next one I can't damage as I need the flywheel the first one is in good nick don't need it awesome as thanks for the help guys much appreciated

Also my knuckels are in goOd nick no damage

bazook

az supporter

Joined: Sat Jul 12, 2008 11:30 pm
Posts: 1082
Location: brisbane logan

Posted: Tue Nov 22, 2011 7:02 am

air gun is the easy way

_________________
josh AKA Bazook

pyrohamish

Joined: Wed May 27, 2009 11:30 pm
Posts: 331
Location: Fremantle, WA
Vehicle: '85 Sierra LWB Ute, Lkd 33's

Posted: Tue Nov 22, 2011 9:07 am

without a impact wrench get a decent socket and breaker bar with a hammer and block of wood

_________________
'88 Tin Top Sierra, '95 JX Vitara Estate
Go hard,

Page 1 of 1

[ 11 posts ]

Board index » Talking About Stuff » Suzuki Talk

Who is online

Users browsing this forum: Google [Bot] and 894 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum