| Author |
Message |
dp87
Joined: Fri Jun 04, 2010 11:48 am Posts: 174 Location: sydney
|
 Posted: Sat Dec 17, 2011 10:46 am |
|
|
Hey guys my clutch cable in my sierra is clicky. it happens about half way when u put the pedal down. its just started doing it. it was nice and smooth the other day. I'm running a exedy heavy duty with g16b.
Do u think the cable is on the way out?
|
|
|
|
 |
Daves4wd

az supporter
Joined: Fri Aug 26, 2011 3:17 pm Posts: 1286 Location: Melbourne
Vehicle: Swb Sierra twin lock 32s 6.5s
|
 Posted: Sat Dec 17, 2011 10:55 am |
|
|
I'd say it would be apparently the cables don't like heavy duty
|
|
|
|
 |
CairnsZook

az supporter
Joined: Tue Jul 18, 2006 11:30 pm Posts: 872 Location: West Coast
Vehicle: Zookless
|
 Posted: Sat Dec 17, 2011 11:16 am |
|
Disconnect cable, lube it, then re-install it.
I did this the other day, it now feels brand new 
|
|
|
|
 |
zuk_244
Joined: Sun Jun 28, 2009 11:30 pm Posts: 170 Location: Wangaratta, Vic
|
 Posted: Sat Dec 17, 2011 11:23 am |
|
dp87 wrote: Hey guys my clutch cable in my sierra is clicky. it happens about half way when u put the pedal down. its just started doing it. it was nice and smooth the other day. I'm running a exedy heavy duty
Mine used to do the same thing. By clicky do you mean there is a point where the "peddle pressure" changes?
Mine used to get harder to push then at a point you would feel it go really easy. I think it was just the HD clutch. Thats why i run standard clutch now 
|
|
|
|
 |
dp87
Joined: Fri Jun 04, 2010 11:48 am Posts: 174 Location: sydney
|
 Posted: Sat Dec 17, 2011 12:41 pm |
|
zuk_244 wrote: dp87 wrote: Hey guys my clutch cable in my sierra is clicky. it happens about half way when u put the pedal down. its just started doing it. it was nice and smooth the other day. I'm running a exedy heavy duty Mine used to do the same thing. By clicky do you mean there is a point where the "peddle pressure" changes? Mine used to get harder to push then at a point you would feel it go really easy. I think it was just the HD clutch. Thats why i run standard clutch now 
nah it doesnt really change pressure. it just feels like its got a notch in it... like as if its grabbing on somethig. ive been pretty happy with the HD clutch so far
|
|
|
|
 |
dp87
Joined: Fri Jun 04, 2010 11:48 am Posts: 174 Location: sydney
|
 Posted: Sat Dec 17, 2011 12:42 pm |
|
|
what should i lube it with? i might buy a new cable just incase it breaks
|
|
|
|
 |
royce

omnipotent being
Joined: Sun Jun 11, 2006 11:30 pm Posts: 17216 Location: Pluto
|
 Posted: Sat Dec 17, 2011 7:40 pm |
|
silicone spray or something is good for lubing it, though it all seems to attract gunk and make it worse
all heavy duty clutch owners should have a spare cable and tools to swap at a moments notice in the car 
|
|
|
|
 |
Che

az supporter
Joined: Thu Mar 11, 2010 10:30 pm Posts: 2401 Location: Perth
Vehicle: LPG 1.6 Sierra
|
 Posted: Sat Dec 17, 2011 8:05 pm |
|
|
Mine started feeling like this when I tore the rubber boot thing at the clutch end. Rip the rest of the rubber boot off (not doing much if it's ripped up anyway), it fixed that 'clicky' feeling in mine.
|
|
|
|
 |
steak_knife

az supporter
Joined: Fri May 22, 2009 11:30 pm Posts: 21335 Location: Smart Ass Island
|
 Posted: Sat Dec 17, 2011 10:22 pm |
|
|
Have a good look at the outer case near the rad to, they like to shit there....
_________________ I used to be indecisive,
now I'm not so sure.....
|
|
|
|
 |
BlueSuzy

az supporter
Joined: Sun May 04, 2008 11:30 pm Posts: 9716 Location: NSW
Vehicle: SJ51 LWB, SJ70 SWB
|
 Posted: Sat Dec 17, 2011 11:08 pm |
|
yep. I've had the cable come out of the outer. Drove home with no clutch. that was fun..  Cable was old, stock clutch.
_________________ BlueSuzy wrote: I'm over the G16b's.
|
|
|
|
 |
banga
Joined: Tue Nov 17, 2009 10:30 pm Posts: 668 Location: sunshine coast
|
 Posted: Sun Dec 18, 2011 3:24 am |
|
royce wrote: silicone spray or something is good for lubing it, though it all seems to attract gunk and make it worse all heavy duty clutch owners should have a spare cable and tools to swap at a moments notice in the car 
would graphite powder be better for lubing so it does'nt attract dirt and grime.
_________________ lseries 2" body lift king springs 27" boots and a
|
|
|
|
 |
steak_knife

az supporter
Joined: Fri May 22, 2009 11:30 pm Posts: 21335 Location: Smart Ass Island
|
 Posted: Sun Dec 18, 2011 3:33 am |
|
banga wrote: royce wrote: silicone spray or something is good for lubing it, though it all seems to attract gunk and make it worse all heavy duty clutch owners should have a spare cable and tools to swap at a moments notice in the car  would graphite powder be better for lubing so it does'nt attract dirt and grime.
Yes........
_________________ I used to be indecisive,
now I'm not so sure.....
|
|
|
|
 |
|