auszookers.com • View topic - SUNSHINE COAST VITARA WRECKERS *CLOSED*

Board index » Shift It And Find It » Getting rid of stuff

SUNSHINE COAST VITARA WRECKERS CLOSED

Page 12 of 14

[ 415 posts ]

Go to page Previous 1 ... 9, 10, 11, 12, 13, 14 Next

Print view

Previous topic | Next topic

Author

Message

MADMANx511

az supporter

Joined: Sat Oct 29, 2011 7:02 am
Posts: 415
Location: Paddington, Brisbane, Qld
Vehicle: Ex-Owner

Posted: Thu Dec 22, 2011 8:26 am

How much for the small plastic flap-lid thing which sits between the two front seats which covers a storage spot? Mine's busted and it's a little annoyance I want replaced

_________________
Mitch D.

want33s

az supporter

Joined: Fri Nov 16, 2007 10:30 pm
Posts: 8134
Location: Sunshine Coast Qld

Posted: Thu Dec 22, 2011 8:53 am

MADMANx511 wrote:

How much for the small plastic flap-lid thing which sits between the two front seats which covers a storage spot? Mine's busted and it's a little annoyance I want replaced

Not sure it has one. I'll look tomorrow and let you know.

MADMANx511

az supporter

Joined: Sat Oct 29, 2011 7:02 am
Posts: 415
Location: Paddington, Brisbane, Qld
Vehicle: Ex-Owner

Posted: Thu Dec 22, 2011 10:11 am

want33s wrote:

MADMANx511 wrote:

How much for the small plastic flap-lid thing which sits between the two front seats which covers a storage spot? Mine's busted and it's a little annoyance I want replaced

Not sure it has one. I'll look tomorrow and let you know.

Cheers mate.

Also, would the steering wheel column cover-thing fit a '92 SWB Vit? Mine's suffering from major sun damage.

_________________
Mitch D.

want33s

az supporter

Joined: Fri Nov 16, 2007 10:30 pm
Posts: 8134
Location: Sunshine Coast Qld

Posted: Fri Dec 23, 2011 5:00 am

MADMANx511 wrote:

Also, would the steering wheel column cover-thing fit a '92 SWB Vit? Mine's suffering from major sun damage.

There is no lid thing and the column cover is stuffed.
Sorry.

want33s

az supporter

Joined: Fri Nov 16, 2007 10:30 pm
Posts: 8134
Location: Sunshine Coast Qld

Posted: Fri Dec 23, 2011 5:01 am

Engine, loom, ECM and power steer are all sold.

MADMANx511

az supporter

Joined: Sat Oct 29, 2011 7:02 am
Posts: 415
Location: Paddington, Brisbane, Qld
Vehicle: Ex-Owner

Posted: Fri Dec 23, 2011 6:12 am

want33s wrote:

MADMANx511 wrote:

Also, would the steering wheel column cover-thing fit a '92 SWB Vit? Mine's suffering from major sun damage.

There is no lid thing and the column cover is stuffed.
Sorry.

Ah, that's a pity. Cheers anyways man.

_________________
Mitch D.

86slowsierra

az supporter

Joined: Fri Jul 25, 2008 11:30 pm
Posts: 724
Location: Melbourne
Vehicle: nt sierra

Posted: Sat Dec 24, 2011 6:07 am

hey mate
after some WT retractable seat belts. good enough condition to pass a Road worthy. and a quote to Vic 3074.

want33s

az supporter

Joined: Fri Nov 16, 2007 10:30 pm
Posts: 8134
Location: Sunshine Coast Qld

Posted: Sat Dec 24, 2011 6:18 am

86slowsierra wrote:

hey mate
after some WT retractable seat belts. good enough condition to pass a Road worthy. and a quote to Vic 3074.

Not sure I have any left.
Will look and let you know.

Aaron

az supporter

Joined: Thu Jan 21, 2010 10:30 pm
Posts: 348
Location: Goldcoast, Pac Pines

Posted: Mon Dec 26, 2011 8:34 pm

hey mate would you have a full power steering kit to suit conversion onto a 1988 1.3 sierra?

_________________
Sierra, 32's, Airlocked, 6.5'd, hopefully ruf soon

want33s

az supporter

Joined: Fri Nov 16, 2007 10:30 pm
Posts: 8134
Location: Sunshine Coast Qld

Posted: Mon Dec 26, 2011 8:39 pm

Aaron wrote:

hey mate would you have a full power steering kit to suit conversion onto a 1988 1.3 sierra?

Sorry no.

tonka_tuff

az supporter

Joined: Mon Jul 06, 2009 11:30 pm
Posts: 1017
Location: brisbane QLD
Vehicle: 91 swb vit 5"lift 31's.

Posted: Tue Dec 27, 2011 6:46 am

hey mate got any ash trays for a swb vit? the ones in the dash infront of the gear stick under the stereo??

swifty_ano

Joined: Tue Jun 29, 2010 4:17 am
Posts: 1664
Location: Brisbane, QLD

Posted: Tue Dec 27, 2011 6:47 am

Transfer case cross member

want33s

az supporter

Joined: Fri Nov 16, 2007 10:30 pm
Posts: 8134
Location: Sunshine Coast Qld

Posted: Tue Dec 27, 2011 9:21 pm

tonka_tuff wrote:

hey mate got any ash trays for a swb vit? the ones in the dash infront of the gear stick under the stereo??

There is one here but it has some ugly phone holder glued to it.

swifty_ano wrote:

Transfer case cross member

Yep got one here.

tonka_tuff

az supporter

Joined: Mon Jul 06, 2009 11:30 pm
Posts: 1017
Location: brisbane QLD
Vehicle: 91 swb vit 5"lift 31's.

Posted: Tue Dec 27, 2011 10:44 pm

i might pass haha what about all 3 locks for swb?? and possibly ignition barrel so i can keep the same key for all.. haha

want33s

az supporter

Joined: Fri Nov 16, 2007 10:30 pm
Posts: 8134
Location: Sunshine Coast Qld

Posted: Tue Dec 27, 2011 10:49 pm

tonka_tuff wrote:

i might pass haha what about all 3 locks for swb?? and possibly ignition barrel so i can keep the same key for all.. haha

Yep.. Ignition, glove box and 3 door locks are still here.

peteandliz

Joined: Mon Aug 01, 2011 2:51 pm
Posts: 163
Location: brisbane
Vehicle: 93 lwb vitara

Posted: Wed Dec 28, 2011 2:02 am

do u have any good starter motors for a g16

want33s

az supporter

Joined: Fri Nov 16, 2007 10:30 pm
Posts: 8134
Location: Sunshine Coast Qld

Posted: Wed Dec 28, 2011 5:42 am

peteandliz wrote:

do u have any good starter motors for a g16

Sorry only got G13 starters left.

tonka_tuff

az supporter

Joined: Mon Jul 06, 2009 11:30 pm
Posts: 1017
Location: brisbane QLD
Vehicle: 91 swb vit 5"lift 31's.

Posted: Fri Dec 30, 2011 2:38 am

hey mate got a good viscous hub on that vit? if so how much? cheers

lukes_89

Joined: Fri Sep 25, 2009 11:30 pm
Posts: 1204
Location: sunshine coast

Posted: Fri Dec 30, 2011 3:21 am

hey jas wouldn't happen to have a set of extractors and exhaust for a lwb vit

want33s

az supporter

Joined: Fri Nov 16, 2007 10:30 pm
Posts: 8134
Location: Sunshine Coast Qld

Posted: Fri Dec 30, 2011 3:28 am

tonka_tuff wrote:

hey mate got a good viscous hub on that vit? if so how much? cheers

It went with the engine/loom.

lukes_89 wrote:

hey jas wouldn't happen to have a set of extractors and exhaust for a lwb vit

Had extractors but they went with the engine. Have a decent SWB system here that is complete with cat/con.

overlander74

Joined: Fri Jul 09, 2010 7:59 pm
Posts: 22
Location: Bundaberg

Posted: Fri Dec 30, 2011 5:04 am

Bit of a long shot but do you have any A frames that go on the front of a swb Vit so i can tow it behind my patrol.

want33s

az supporter

Joined: Fri Nov 16, 2007 10:30 pm
Posts: 8134
Location: Sunshine Coast Qld

Posted: Fri Dec 30, 2011 6:59 am

overlander74 wrote:

Bit of a long shot but do you have any A frames that go on the front of a swb Vit so i can tow it behind my patrol.

No....
You can't legally A frame tow a Vitara behind a Patrol.
You need a much larger vehicle (over 4500kg).

overlander74

Joined: Fri Jul 09, 2010 7:59 pm
Posts: 22
Location: Bundaberg

Posted: Fri Dec 30, 2011 9:36 am

Hi from what i understand from the transport department sheet called "safe towing".
Introduction
This section of the Queensland Transport website explains how to undertake "A" frame towing of a
motor vehicle with a Gross Vehicle Mass (GVM) of up to 4.5t in Queensland in a manner that satisfies the Queensland Road Rules.

Basically if the A frame has engineer approval and one set of the towed vehicals brakes must work when the towing vehicals brakes are applied and it is within the legal towing capacity of the towing vehical then it is legal.

OFFROAD_SOLUTIONS

Joined: Thu Feb 10, 2011 5:33 pm
Posts: 201
Location: Brissy north side

Posted: Fri Dec 30, 2011 12:02 pm

So your not just after the a frame then mate your also after all the modified braking to suit too. I suggest you try some where that dose motor homes as this is the only time I've seen these set ups used legally and I'm sure they are worth a pretty penny too as for mounts I'm sure extra ones would be bolted on and engineeried

_________________
Your rims flipped from $50

sjb-85

Joined: Wed Apr 27, 2011 10:05 am
Posts: 94
Location: Pakenham Vic

Posted: Fri Dec 30, 2011 11:01 pm

Would you have an efi swb vitara fuel tank?

_________________
1990 Hardtop Sierra- Twin locked, 2" Spring lift,

want33s

az supporter

Joined: Fri Nov 16, 2007 10:30 pm
Posts: 8134
Location: Sunshine Coast Qld

Posted: Sat Dec 31, 2011 12:47 am

sjb-85 wrote:

Would you have an efi swb vitara fuel tank?

Sure do. PM sent.

GRPABT1

Joined: Mon Nov 19, 2007 10:30 pm
Posts: 731
Location: Townsville
Vehicle: 88 SWB WT Sierra soft top ute

Posted: Mon Jan 02, 2012 2:02 am

Any LWB Vitara fuel tanks?

dono1

az supporter

Joined: Fri Nov 26, 2010 10:57 pm
Posts: 566
Location: Mid North Coast NSW

Posted: Mon Jan 02, 2012 6:49 am

Do you have a 5.12 ring and pinion to fit into a sierra diff?
And postage to NSW 2446.

ifish86

Joined: Sun Dec 25, 2011 9:04 am
Posts: 12
Location: brisbane

Posted: Mon Jan 02, 2012 6:52 am

exhaust manifold and cat for a j20a?

want33s

az supporter

Joined: Fri Nov 16, 2007 10:30 pm
Posts: 8134
Location: Sunshine Coast Qld

Posted: Mon Jan 02, 2012 7:10 am

GRPABT1 wrote:

Any LWB Vitara fuel tanks?

dono1 wrote:

Do you have a 5.12 ring and pinion to fit into a sierra diff?
And postage to NSW 2446.

PM sent.

ifish86 wrote:

exhaust manifold and cat for a j20a?

Page 12 of 14

[ 415 posts ]

Go to page Previous 1 ... 9, 10, 11, 12, 13, 14 Next

Board index » Shift It And Find It » Getting rid of stuff

Who is online

Users browsing this forum: No registered users and 1 guest

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum