auszookers.com • View topic

Board index » Talking About Stuff » Suzuki Talk

gti engine

Page 1 of 1

[ 20 posts ]

Print view

Previous topic | Next topic

Author

Message

shreks

Joined: Fri Aug 13, 2010 12:53 pm
Posts: 82
Location: darra

Posted: Sun Dec 25, 2011 11:59 am

hi i got a mk2 engine i think :roll:

anywayi put the mazda dizzy cap n rotor on and a w022a thermostat housing and the thermostat housing is almost touching the dizzy cap like the thermostat housing pipe needs to be a bit lower what can i try ?? maybe another thermostat housing??

zookfun

Joined: Sat Jun 06, 2009 11:30 pm
Posts: 203
Location: SA

Posted: Sun Dec 25, 2011 7:59 pm

You can use the thermostat housing off a suzuki swift cino (94-late90s i believe)

shreks

Joined: Fri Aug 13, 2010 12:53 pm
Posts: 82
Location: darra

Posted: Mon Dec 26, 2011 2:19 am

anyone else or has anyone got a part number or something i tried supercheap and repco

matty_wall

Joined: Sun Feb 15, 2009 10:30 pm
Posts: 989
Location: Blue Mountains
Vehicle: SJ51T

Posted: Mon Dec 26, 2011 2:33 am

Go to a wrecker. I paid $11 for a swift one.

Theres a thread somewhere on here that tells you the part number if you want it that bad.

jonno_racing

az supporter

Joined: Wed Apr 15, 2009 11:30 pm
Posts: 8164
Location: Tassie
Vehicle: suzuki

Posted: Mon Dec 26, 2011 2:36 am

I use swift ones. the top coolent pipe needs to run over your exaust.

_________________
Do cool stuff, Put it on the internet
Sierra build, Jimny build
https://www.youtube.com/user/redzook1

shreks

Joined: Fri Aug 13, 2010 12:53 pm
Posts: 82
Location: darra

Posted: Mon Dec 26, 2011 9:30 am

im using a 1.3 sierra thermostat housing

zookfun

Joined: Sat Jun 06, 2009 11:30 pm
Posts: 203
Location: SA

Posted: Mon Dec 26, 2011 9:49 am

shreks

Joined: Fri Aug 13, 2010 12:53 pm
Posts: 82
Location: darra

Posted: Mon Dec 26, 2011 9:54 am

what is that 1 for

atari4x4

az supporter

Joined: Mon Dec 11, 2006 10:30 pm
Posts: 34842
Location: East Radelayed
Vehicle: SV420+SV620 Vitara's

Posted: Mon Dec 26, 2011 10:19 am

red writing to the left of the 1 says:

Quantity
(quantitie)

_________________
You're just hating because you don't understand

jonno_racing

az supporter

Joined: Wed Apr 15, 2009 11:30 pm
Posts: 8164
Location: Tassie
Vehicle: suzuki

Posted: Mon Dec 26, 2011 11:14 am

your trying to use the wrong part.

_________________
Do cool stuff, Put it on the internet
Sierra build, Jimny build
https://www.youtube.com/user/redzook1

jonno_racing

az supporter

Joined: Wed Apr 15, 2009 11:30 pm
Posts: 8164
Location: Tassie
Vehicle: suzuki

Posted: Mon Dec 26, 2011 11:15 am

post up a pic of your motor mate

_________________
Do cool stuff, Put it on the internet
Sierra build, Jimny build
https://www.youtube.com/user/redzook1

shreks

Joined: Fri Aug 13, 2010 12:53 pm
Posts: 82
Location: darra

Posted: Mon Dec 26, 2011 10:41 pm

pics

You do not have the required permissions to view the files attached to this post.

jonno_racing

az supporter

Joined: Wed Apr 15, 2009 11:30 pm
Posts: 8164
Location: Tassie
Vehicle: suzuki

Posted: Mon Dec 26, 2011 10:45 pm

wrong thermistat housing, pointing the wrong way

yep that's a mk2/3

_________________
Do cool stuff, Put it on the internet
Sierra build, Jimny build
https://www.youtube.com/user/redzook1

shreks

Joined: Fri Aug 13, 2010 12:53 pm
Posts: 82
Location: darra

Posted: Mon Dec 26, 2011 10:45 pm

1st pic is engine
2nd is with the w022a thermostat housing
and the 3rd is with the sierra thermostat housing

shreks

Joined: Fri Aug 13, 2010 12:53 pm
Posts: 82
Location: darra

Posted: Tue Dec 27, 2011 1:10 am

does it matter what way it goes

jonno_racing

az supporter

Joined: Wed Apr 15, 2009 11:30 pm
Posts: 8164
Location: Tassie
Vehicle: suzuki

Posted: Tue Dec 27, 2011 1:13 am

yep. I have fucked around with gti cooling a lot..

best method is use a swift thermistat housing and direct it over the top of the exaust. I make and sell a stainless top hose that works perfect.

_________________
Do cool stuff, Put it on the internet
Sierra build, Jimny build
https://www.youtube.com/user/redzook1

Ratty562

Joined: Fri Apr 09, 2010 11:30 pm
Posts: 839
Location: NSW, Sydney

Posted: Tue Dec 27, 2011 1:24 am

jonno_racing wrote:

yep. I have fucked around with gti cooling a lot..

best method is use a swift thermistat housing and direct it over the top of the exaust. I make and sell a stainless top hose that works perfect.

would this work aswell with the Baleno motor i may be interested in the stainless top hose

thanks matt

shreks

Joined: Fri Aug 13, 2010 12:53 pm
Posts: 82
Location: darra

Posted: Tue Dec 27, 2011 1:54 am

jonno_racing wrote:

yep. I have fucked around with gti cooling a lot..

best method is use a swift thermistat housing and direct it over the top of the exaust. I make and sell a stainless top hose that works perfect.

do u have a pic of it on motor and what does it matter if it goes over exhaust manifold or under intake manifold well i thought intake side would be a bit cooler

jonno_racing

az supporter

Joined: Wed Apr 15, 2009 11:30 pm
Posts: 8164
Location: Tassie
Vehicle: suzuki

Posted: Tue Dec 27, 2011 2:02 am

if u go under intake you will get airlock issues..

Posibly belino, however hard to make without car.

_________________
Do cool stuff, Put it on the internet
Sierra build, Jimny build
https://www.youtube.com/user/redzook1

jonno_racing

az supporter

Joined: Wed Apr 15, 2009 11:30 pm
Posts: 8164
Location: Tassie
Vehicle: suzuki

Posted: Tue Dec 27, 2011 2:08 am

_________________
Do cool stuff, Put it on the internet
Sierra build, Jimny build
https://www.youtube.com/user/redzook1

Page 1 of 1

[ 20 posts ]

Board index » Talking About Stuff » Suzuki Talk

Who is online

Users browsing this forum: Google [Bot] and 1142 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum