It is currently Thu Aug 06, 2026 2:35 am
Board index » Talking About Stuff » Suzuki Talk

Post new topic Reply to topic  Page 1 of 1
  [ 10 posts ] 

Print view

Previous topic | Next topic

Author Message
stocker

Offline
User avatar

Joined: Wed Dec 08, 2010 7:16 am
Posts: 941
Location: Shidoni!

Post Posted: Thu Dec 29, 2011 2:14 am 
Reply with quote Top  
Hello again Auszookers...

Having some trouble removing the rear wheel bearings from the axle.

Question... Is the hub supposed to come off the axle and the bearings come off that way. Or is the retainer supposed to come off then wheel bearing etc...

Cheers
Rob

_________________
Stocker


Last edited by stocker on Tue Jan 03, 2012 5:41 am, edited 1 time in total.
 Profile  
tombutt

Offline

Joined: Sat Jul 19, 2008 11:30 pm
Posts: 1917
Location: brisbane

Post Posted: Thu Dec 29, 2011 2:18 am 
Reply with quote Top  
mate you need to cut them off carefully with a grinder or alike then press new bearing and retainer on from the end with the spline cut into it ie diff center end
 Profile  
stocker

Offline
User avatar

Joined: Wed Dec 08, 2010 7:16 am
Posts: 941
Location: Shidoni!

Post Posted: Thu Dec 29, 2011 2:19 am 
Reply with quote Top  
No worries. Thanks for that mate.

_________________
Stocker
 Profile  
stocker

Offline
User avatar

Joined: Wed Dec 08, 2010 7:16 am
Posts: 941
Location: Shidoni!

Post Posted: Tue Jan 03, 2012 4:13 am 
Reply with quote Top  
OK NEW inquiry...


I just went to attempt to purchase a Wheel bearing kit from the people at Repco. And everything except the Bearing Matched my one... The Bearing in the kit, Has a Wider Inner Race compared to the Outer race, by about 20mm... he assured me this is the only kit they make for them and then cross referenced his numbers vs CBC's and a couple of other bearing companies... Mine was the Same size inner and outer Race.

Has anyone got the Actually Bearing number and make of the SE 416 Non-abs Vitara...

_________________
Stocker
 Profile  
SierraDan

Offline
az supporter
az supporter
User avatar

Joined: Fri Feb 04, 2011 10:55 pm
Posts: 9348
Location: Newcastle
Vehicle: G13BB Jimny

Post Posted: Tue Jan 03, 2012 6:05 am 
Reply with quote Top  
wider on one side?

_________________
mlm
 Profile  
stocker

Offline
User avatar

Joined: Wed Dec 08, 2010 7:16 am
Posts: 941
Location: Shidoni!

Post Posted: Tue Jan 03, 2012 6:20 am 
Reply with quote Top  
as in the Inner race vs the Outer Race.

The Inner Side of the bearing, is literally Wider than the Outer Side of the Bearing.

The inner side was Approx 20 - 30mm Wider than the Outer

_________________
Stocker
 Profile  
atari4x4

Offline
az supporter
az supporter
User avatar

Joined: Mon Dec 11, 2006 10:30 pm
Posts: 34842
Location: East Radelayed
Vehicle: SV420+SV620 Vitara's

Post Posted: Tue Jan 03, 2012 6:40 am 
Reply with quote Top  
pics?

_________________
You're just hating because you don't understand
 Profile WWW  
Buddies72

Offline
az supporter
az supporter
User avatar

Joined: Wed Aug 25, 2010 9:14 am
Posts: 240
Location: Brisbane
Vehicle: 96 LWB Vit

Post Posted: Tue Jan 03, 2012 10:08 am 
Reply with quote Top  
stocker wrote:
as in the Inner race vs the Outer Race.

The Inner Side of the bearing, is literally Wider than the Outer Side of the Bearing.

The inner side was Approx 20 - 30mm Wider than the Outer


Are you talking about the inner being the part that presses onto the axle and the outer being the part that fits inside the axle tube?

If so, the 'inner' should be larger, and from memory the wider part goes towards the diff center/spline end of the axle - Atari, feel free to correct me if i'm wrong.

_________________
Buddies

I can't leave well enough alone....
 Profile  
thesupervisor

Offline

Joined: Sat Jul 30, 2011 12:14 am
Posts: 193
Location: perth

Post Posted: Tue Jan 03, 2012 10:25 am 
Reply with quote Top  
sounds like tapered bearings
 Profile  
stocker

Offline
User avatar

Joined: Wed Dec 08, 2010 7:16 am
Posts: 941
Location: Shidoni!

Post Posted: Wed Jan 04, 2012 2:03 am 
Reply with quote Top  
Buddies72 wrote:
stocker wrote:
as in the Inner race vs the Outer Race.

The Inner Side of the bearing, is literally Wider than the Outer Side of the Bearing.

The inner side was Approx 20 - 30mm Wider than the Outer


Are you talking about the inner being the part that presses onto the axle and the outer being the part that fits inside the axle tube?

If so, the 'inner' should be larger, and from memory the wider part goes towards the diff center/spline end of the axle - Atari, feel free to correct me if i'm wrong.



Bingo... The original bearing did not have this it was the same size inner and outer...


And sorry atari when the bearing didn't look the same I handed it back... Also the original bearing is now in pieces due to an unfortunate accident it had with my oxyacetylene set... ... Woops

_________________
Stocker
 Profile  
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 10 posts ] 

Jump to:  


Who is online

Users browsing this forum: No registered users and 901 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum
Untitled Document


Untitled Document


Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group :: Style based on FI Subice by phpBBservice.nl :: All times are UTC + 9:30 hours

Advertisements by Advertisement Management

Advertisements by Advertisement Management