[rwt65]

I am after the specs for flywheel bolts, what thread size and diameter?
Do they vary from model to model?
Want to get new replacements, what do I need to get?
Cheers
Richard T

[squibby]

Stretch bolts probably. We should buy new ones when we replace them, probably best to get them from the dealer since they are a specialised item imo. That said I have been naughty and re-used them myself with no explosions as yet, although I'd definately buy new ones the second time they are undone. You'll need eight of them on a M-series engine.

[rwt65]

, sorry about that, G13 series engine and details?

[want33s]

squibby wrote:

Stretch bolts probably. .................................................

No they aren't.
They are fine to reuse if they aren't damaged.

You can pick a single use bolt by the torque settings in the FSM.
Normal reusable bolts just have a set torque rating to tighten to.. EG 40Nm

Single use bolts will be EG 40Nm plus a quarter turn.

[squibby]

want33s wrote:

No they aren't.

oh good

[Rhinoman]

Use threadlock when you replace them, they have a habit of falling out if you don't.

[whincup]

Rhinoman wrote:

Use threadlock when you replace them, they have a habit of falling out if you don't.

x2

http://www.auszookers.com/index.php?nam ... 07&start=0