It is currently Thu Aug 06, 2026 8:21 pm
Board index » Talking About Stuff » Suzuki Talk



Post new topic Reply to topic  [ 10 posts ] 
Author Message

Offline
User avatar

Joined: Tue Feb 16, 2010 10:30 pm
Posts: 112
Location: Brisbane (Northside)
Vehicle: SJ413 WT

Post Posted: Wed Feb 08, 2012 9:05 am 
Reply with quote Top  
Hey lads,

After giving my Sierra W/T a bit of a workout on the weekend, I've noticed a significant amount of diff oil leaking out onto my front right tyre. I haven't had time to look at it properly yet, but it's getting in and around the disk brake as well.

I'm going to tackle the job on Saturday, but I just thought if I can find out what part is likely busted, I can get in and fix the whole thing on the weekend, rather than discovering the problem and then having to wait till the replacement part arrives to fix it.

It's definitely diff oil, not brake fluid. I'm guessing it's a dead seal or bearing or something?

Cheers once again guys. :)

 Profile  

Offline

Joined: Thu Sep 01, 2011 11:48 pm
Posts: 814
Location: kinglake, VIC

Post Posted: Wed Feb 08, 2012 9:06 am 
Reply with quote Top  
It will be ur axle seal

_________________
I love lamp

 Profile  

Offline
User avatar

Joined: Mon Nov 19, 2007 10:30 pm
Posts: 731
Location: Townsville
Vehicle: 88 SWB WT Sierra soft top ute

Post Posted: Wed Feb 08, 2012 9:26 am 
Reply with quote Top  
What he said ^

 Profile  

Offline
User avatar

Joined: Wed Mar 24, 2010 10:30 pm
Posts: 16343
Location: Perth
Vehicle: '92 Sierra, 1.6efi, SPOA, 31s.

Post Posted: Wed Feb 08, 2012 9:36 am 
Reply with quote Top  
mines been leaking for nearly 2 months now... getting it sorted on friday cos i reckon the front diff must be almost empty by now. Mine's leaking bad enough that after sitting for just 2hrs its left a puddle of diff oil about 90mm diameter!

this is what you need to fix it too: http://www.suzistore.com.au/shopexd.asp?id=1183&bc=no

_________________
Image

 Profile  

Offline
User avatar

Joined: Tue Feb 16, 2010 10:30 pm
Posts: 112
Location: Brisbane (Northside)
Vehicle: SJ413 WT

Post Posted: Wed Feb 08, 2012 9:55 am 
Reply with quote Top  
:cheers:
Thanks lads.

Damn Alien, do you reckon you need to replace all the bearings and backup plates as well? Surely you can just get away with replacing the seal?

 Profile  

Offline
User avatar

Joined: Wed Mar 24, 2010 10:30 pm
Posts: 16343
Location: Perth
Vehicle: '92 Sierra, 1.6efi, SPOA, 31s.

Post Posted: Wed Feb 08, 2012 10:01 am 
Reply with quote Top  
no point doing half a job... lol

sometimes the axle bearings are shot, which is what puts pressure on the seal in the first place.

_________________
Image

 Profile  

Offline
User avatar

Joined: Tue Feb 16, 2010 10:30 pm
Posts: 112
Location: Brisbane (Northside)
Vehicle: SJ413 WT

Post Posted: Wed Feb 08, 2012 10:15 am 
Reply with quote Top  
Yeah, I tend to agree.
If it's anything like replacing the rear wheel bearings, you won't really want to be having to go back in again later if the bearing ruins another seal.
Advice heeded. Hopefully suzi sport sell that kit and I won't have to wait a week for suzistore to deliver.

 Profile  

Offline
User avatar

Joined: Tue Feb 16, 2010 10:30 pm
Posts: 112
Location: Brisbane (Northside)
Vehicle: SJ413 WT

Post Posted: Wed Feb 08, 2012 12:27 pm 
Reply with quote Top  
FYI - Bit cheaper -> http://www.ebay.com.au/itm/Swivel-Overh ... 145wt_1146

Or with replacement wheel bearings - http://www.ebay.com.au/itm/Swivel-Wheel ... 988wt_1169

 Profile  

Offline
az supporter
az supporter
User avatar

Joined: Sun May 04, 2008 11:30 pm
Posts: 9716
Location: NSW
Vehicle: SJ51 LWB, SJ70 SWB

Post Posted: Wed Feb 08, 2012 12:36 pm 
Reply with quote Top  
Jack the car up at the front. Put on stands. If nothing moves clonks wobbles forcing the wheel by pushing and pulling the top and bottom of wheel, Everything is fine, Just do the axle seal.

Ive been on a trip, Flexed up, all my diff oil poured out one side. :lol: Drove the rest of the Lowrange only 4wd trip. Changed it when i got home.

_________________
BlueSuzy wrote:
I'm over the G16b's.

 Profile  

Offline
az supporter
az supporter
User avatar

Joined: Thu Jan 29, 2009 10:30 pm
Posts: 1612
Location: North Brisbane

Post Posted: Wed Feb 08, 2012 12:42 pm 
Reply with quote Top  
toastysteve wrote:
Yeah, I tend to agree.
If it's anything like replacing the rear wheel bearings, you won't really want to be having to go back in again later if the bearing ruins another seal.
Advice heeded. Hopefully suzi sport sell that kit and I won't have to wait a week for suzistore to deliver.


Try Pine Rivers Bearings at Brendale, Past the 4by Wreckers in the Shops were Future Auto is. Got all my seals and bearings from them. :wink:
Front wheel bearings are expensive so if there good I'd leave them be.

_________________
SS

 Profile  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 10 posts ] 

Jump to:  


Who is online

Users browsing this forum: BZOOK and 755 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum
Untitled Document


Untitled Document


Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group :: Style based on FI Subice by phpBBservice.nl :: All times are UTC + 9:30 hours