[want33s]

Got too much crap here so some of it has to go...

WT rear diff housing (bare).

Has had the perches moved to NT spacing and had 20mm shaved from the bottom for better ground clearance. Also has brake line locating tabs on each side in readiness for a disc brake conversion.
Painted gloss black, ready to assemble.
SOLD




Maruti cab with extras.

1 Maruti cab section.
1 roof section.
1 Maruti targa bar.
1 Maruti LWB steel filler panel.
1 Suzuki SWB steel filler panel.
8 Sierra tintop rear windows. Most with demister.
My plan was to take a mold and reproduce these using tintop rear windows as they are a tiny bit larger and much easier to get.
BUSINESS OPPORTUNITY for the right person.
$900
PICKUP ONLY


SIERRA & VITARA Radiators
Brand new in the box, alloy cored, plastic tanked radiators to suit 1.3-1.6 Sierra and 1.6 Vitara.
$160 delivered anywhere in Aust.
Sold out of Sierra rads. Will advise when more are in stock.


Vitara 5.12 front centre
Complete 5.12 front centre VGC.
SOLD


Simex Centipede ET2 32x9.5
Set of four 32x9.5 Simex Extreme Centipedes.
Very good tread (13mm). Few nicks and cuts but nothing serious.
$800



38mm Wheel spacers
Set of four inch and a half (38mm) aluminium wheelspacers to suit Sierra or Vitara.
$200




Bathurst Globe mag wheels 15x7
Set of four Globe 5 spoke alloy wheels in 15x7 with 0 offset.
They have 2nd valve stem holes fitted for internal beadlocks but this isn't a drama if you don't have beadlocks.
$200



WT LWB rear tailshaft
Custom made super heavy wall 1.3 WT lwb rear tailshaft.
SOLD



ARB OME +40 rear springs
Brand new ARB OME rear springs (pair).
Cost $250, sell $200.



WT long side (pass) rear axle
WT LH rear axle with backing plate and drum. No twist in splines.
$75


G13 engine (reco'd)
G13 engine, standard bore with new rings and bearings as well as a fully reco'd head fitted. Has new oil pump too.
Hasn't been started since.
SOLD


Vitara grille (white)
VGC Vitara 89-94? grille. No cracks or broken bits.
$50


1.3 diff centres
2 X NT front... $100 each
1 X NT rear... $150
1 X WT rear... SOLD



Federal Couragia 30x9.5 muddy
One only, 30x9.5 Federal Couragia mud tyre. Has 8mm or so tread.
$50

[want33s]

bump.

[want33s]

First post edited.

[sogone]

Got any transfers?

[sogone]

WT Sierra.

[want33s]

sogone wrote:

Got any (WT Sierra)
transfers?

Sorry, no.

[boost=money]

will come grab spacers next saturday if still there

[want33s]

boost=money wrote:

will come grab spacers next saturday if still there

Cool.. I can post them for $20.

[boost=money]

i will come up and grab them next weekend if u can hold them for me. heading up to barra park so on the way thanks mate

[055ETH]

Any difference in wt and nt diff centers?? Can u put nt centers in a wt?

[want33s]

055ETH wrote:

Any difference in wt and nt diff centers?? Can u put nt centers in a wt?

NT centres will bolt straight into WT housings and the axles fit.
The differences are:
NT 3.9:1
WT 3.7:1......... That means NT is about 5% lower geared.
NT has a smaller drive flange pattern but the flanges on the diffs or the tailshafts can be changed easily.

NT front diffs are 4 pinion which are stronger than WT fronts which are only 2 pinion.

[sambo91]

I was just wondering if you had a sierra body lying around there with the left hand sill in tact ?
I'm looking to chop the old one which i found a heap of bog and crap in it and weld in another one.
My Sierra is an sj80 so the wt or nt one should be fine also =)
Thanks alot for your time.
Regards Sambo.

[Zook_Fan]

Got any stock WT diff housings?

[want33s]

Zook_Fan wrote:

Got any stock WT diff housings?

Yep. Got a standard WT front $75 plus freight.
Got a shaved and NT'd WT rear $100 plus freight.

[want33s]

Diff housing sold pending payment.

[Gadzuks]

Can you please post some pics of the rims?

[want33s]

Gadzuks wrote:

Can you please post some pics of the rims?

How they looked when I first fitted them after hours sanding and polishing.


How they look now.

[want33s]

1st post edited with items sold.

[swifty_ano]

How much for a vitara radiator and ill pick up?
Do you have both sizes?

[want33s]

swifty_ano wrote:

How much for a vitara radiator and ill pick up?
Do you have both sizes?

I have one Vit rad left.
Pretty sure it says SQ416 on the box.
$140 if you pick up.

[swifty_ano]

Sold. I'll measure mine after work and give you a call

[want33s]

Rad is no good to Swifty_Ano, his is smaller so this one is still available.

[Shansh]

rad arrived late last week, thanks Jas

[want33s]

Shansh wrote:

rad arrived late last week, thanks Jas

No worries Shan.

[Zook_Fan]

Do the alloy radiators cool any better than copper core?

[want33s]

Zook_Fan wrote:

Do the alloy radiators cool any better than copper core?

I have never directly compared them but I can say that my 1.6 in Sierra with Sierra rad never got hot unless I was flogging it on the limiter for 5 minutes or more, usually low range in the bottom of a muddy gully, and always cooled down quickly when let idle for a few minutes.

I don't have any 1.3 rads at the moment.
I do have a 1.6 Vit rad here that will fit a Sierra with modified brackets.