| Author |
Message |
20v_sierra
Joined: Thu Jan 15, 2009 10:30 pm Posts: 49 Location: noosa
|
 Posted: Tue Feb 14, 2012 11:09 am |
|
|
For sale: nt 85 hardtop sierra, No motor or gearbox !!!! car woulod be great for some one that has a stock nt, just bolt all the good parts off her on it and make a very tough sierra. car use to have a black top 20v 4age in it. if you want the 4age and t50 with it we might be able to work somehting out, but im in no hurry to sell the motor and box.
extras: wt diffs, 5.12 gears, front lock rite, diffs have had bracing and protective plates welded on, front diff has all seals replaced and new cv's both sides. 2inch spring lift and longer shocks, 2inch body lift installed, fuel tank has a $200 walbro efi pump in it. transfer case in good nick.
Body: sills have been 45ed with 3mm steel plate, has front tube bar that needs finishing off, has rear bar with $170 worth of led's in it, body was painted in oliver drab but doors and rear door still needs painting, paint was in good nick but 2years sitting around has taken its toll, bonnet and roof just above windsreen have a large dent due to bonnet flying up while driving. has vitara seats,
Photos: will throw some up in the next few days.
Price: $1000 ono
location: sunshine coast, qld
contact: on here or 0488488663
cheers Nathan
|
|
|
|
 |
anDy86
Joined: Sat Dec 19, 2009 10:30 pm Posts: 350 Location: Blackburn, Vic
Vehicle: LWB Sierra
|
 Posted: Tue Feb 14, 2012 11:58 am |
|
|
Hey mate - Are you willing to sell the whole lot with the 4age in there?
If so - how much would you want?
|
|
|
|
 |
suzukikid
Joined: Sun Jan 14, 2007 10:30 pm Posts: 2803 Location: Melton Victoria!
|
 Posted: Tue Feb 14, 2012 3:08 pm |
|
|
buy it longy!!!!!!
_________________ back in a built sierra!
|
|
|
|
 |
20v_sierra
Joined: Thu Jan 15, 2009 10:30 pm Posts: 49 Location: noosa
|
 Posted: Tue Feb 14, 2012 3:33 pm |
|
|
$2000 for car with motor and box.
motor needs new big end bearing as on inspection there was some play in the number 4 rod. at this point i lost interest in the project and i have not driven or worked on it since.
blacktop 20v 4age halfcut $2400 t50 gearbox $300 new clutch, slave and master cylinder $500 extractors $350 RWD water pump and fittings $250 fuel pump, lines and filter $300
this is what the engine has cost me to date plus at lot of other small things that add up quick !!!
Need this car gone ASAP !! it has been sitting around to long. someone needs to give her a new home and some the old girl some loving.
Allso the car has not been engineered for the 4age
|
|
|
|
 |
Jimothy
Joined: Tue Jan 03, 2012 5:03 am Posts: 10 Location: Coffs Harbour NSW
|
 Posted: Tue Feb 14, 2012 4:52 pm |
|
|
Hey mate, just making sure - what size motor come out of it? Was it the g13a?
Cheers! Jim
|
|
|
|
 |
20v_sierra
Joined: Thu Jan 15, 2009 10:30 pm Posts: 49 Location: noosa
|
 Posted: Tue Feb 14, 2012 5:09 pm |
|
|
Yer mate it just had the 1.3 in it originally
|
|
|
|
 |
Jimothy
Joined: Tue Jan 03, 2012 5:03 am Posts: 10 Location: Coffs Harbour NSW
|
 Posted: Tue Feb 14, 2012 8:27 pm |
|
|
Thanks mate! Keen to see some photos!
|
|
|
|
 |
20v_sierra
Joined: Thu Jan 15, 2009 10:30 pm Posts: 49 Location: noosa
|
 Posted: Sun Mar 25, 2012 2:31 pm |
|
been away working for the last few weeks so havent had any time to take any photos sorry. there are a few phots in my build up thread tho viewtopic.php?f=4&t=4389&hilit=20v_sierra A move to sydney is on the cards due to work so need this gone in the next month. Bit of a price drop, $1500 for the sierra with motor and box or $750 for car on its own. All so might be keen for a swap on a few things. dirt or road bike, tinny on tailer or if someone has a couple of airlockers to suit a early 90's hilux. Cheers Nathan
|
|
|
|
 |
RUN.10W
Joined: Mon Sep 20, 2010 7:17 am Posts: 211 Location: sydney
|
 Posted: Sun Mar 25, 2012 3:59 pm |
|
Just bring it to Sydney with you  someone down here might buy it
_________________ 96 coily, lifted, locked,geared, 33's.
DRV31T
|
|
|
|
 |
20v_sierra
Joined: Thu Jan 15, 2009 10:30 pm Posts: 49 Location: noosa
|
 Posted: Sun Mar 25, 2012 4:50 pm |
|
RUN.10W wrote: Just bring it to Sydney with you  someone down here might buy it haha would be a good idea but all ready towing the work trailer down and dont want to make two trips.
|
|
|
|
 |
055ETH
Joined: Sun Oct 23, 2011 9:05 pm Posts: 383 Location: Brisbane
Vehicle: 94 Sierra,99 gv, s13 Silvia
|
 Posted: Sun Mar 25, 2012 5:37 pm |
|
|
Can I come look at it tomorrow afternoon??
|
|
|
|
 |
20v_sierra
Joined: Thu Jan 15, 2009 10:30 pm Posts: 49 Location: noosa
|
 Posted: Sun Mar 25, 2012 7:43 pm |
|
055ETH wrote: Can I come look at it tomorrow afternoon?? Sorry but i leave tomorrow to work away for 11 days. When i get back if your still keen we can work out a time for sure.
|
|
|
|
 |
boost=money
Joined: Sun Aug 16, 2009 11:30 pm Posts: 240 Location: brisbane
|
 Posted: Wed Mar 28, 2012 11:17 am |
|
|
Might b keen if old mate dose not buy
|
|
|
|
 |
20v_sierra
Joined: Thu Jan 15, 2009 10:30 pm Posts: 49 Location: noosa
|
 Posted: Wed Mar 28, 2012 6:34 pm |
|
|
No worries mate will contact you when I'm home to come have a look
|
|
|
|
 |
20v_sierra
Joined: Thu Jan 15, 2009 10:30 pm Posts: 49 Location: noosa
|
 Posted: Fri Apr 06, 2012 8:06 am |
|
|
Im back from working away now so if any one is still keen to come have a look at the zuk let me know and we can sort something out, pretty keen to see this thing go so make me an offer.
|
|
|
|
 |
anDy86
Joined: Sat Dec 19, 2009 10:30 pm Posts: 350 Location: Blackburn, Vic
Vehicle: LWB Sierra
|
 Posted: Fri Apr 06, 2012 2:36 pm |
|
|
Tow it to Sydney and I'll tow it home! Haha
|
|
|
|
 |
055ETH
Joined: Sun Oct 23, 2011 9:05 pm Posts: 383 Location: Brisbane
Vehicle: 94 Sierra,99 gv, s13 Silvia
|
 Posted: Fri Apr 06, 2012 5:39 pm |
|
|
Does it have all the glass for it still?
|
|
|
|
 |
xedent

az supporter
Joined: Mon Jun 15, 2009 11:30 pm Posts: 895 Location: Sunshine Coast, QLD
Vehicle: LWB Maruthi on WT Diffs!
|
 Posted: Fri Apr 06, 2012 6:16 pm |
|
|
Any pictures mate ?
_________________ My Maruti build, Click WWW
|
|
|
|
 |
20v_sierra
Joined: Thu Jan 15, 2009 10:30 pm Posts: 49 Location: noosa
|
 Posted: Fri Apr 06, 2012 6:44 pm |
|
055ETH wrote: Does it have all the glass for it still? yer mate it has all glass except the windscreen is cracked from when the bonnet hit it.
|
|
|
|
 |
20v_sierra
Joined: Thu Jan 15, 2009 10:30 pm Posts: 49 Location: noosa
|
 Posted: Fri Apr 06, 2012 6:44 pm |
|
xedent wrote: Any pictures mate ? No new pictures yet mate just the ones in the build up thread
|
|
|
|
 |
Blueberry
Joined: Thu May 27, 2010 7:24 am Posts: 293 Location: sunshine coast
|
 Posted: Fri Apr 06, 2012 8:48 pm |
|
|
just wondering mate, ive got a 4age and t50 here. has the car still got mounts and everything there to bolt it all back in?
cheers, sam.
|
|
|
|
 |
20v_sierra
Joined: Thu Jan 15, 2009 10:30 pm Posts: 49 Location: noosa
|
 Posted: Fri Apr 06, 2012 8:57 pm |
|
Blueberry wrote: just wondering mate, ive got a 4age and t50 here. has the car still got mounts and everything there to bolt it all back in?
cheers, sam. yer mate the engine mount, gearbox mount and transfercase cross memeber is all still there. it all so has the shortened jack shaft and tail shaft.
|
|
|
|
 |
JDMBenji
Joined: Mon Feb 13, 2012 9:44 pm Posts: 3
Vehicle: Toyota Sprinter
|
 Posted: Tue Apr 10, 2012 9:37 am |
|
|
Hey Mate,
I wouldn't mind coming to have a geeze at it. Any chance its still there and I could come have a look?
Cheers, Ben
|
|
|
|
 |
|